This application is designed to recover damaged hard drives and other storage media. In the article, we will look at what the software “can do”, highlight its strengths and weaknesses, and also offer to download the latest version of HDD Regenerator 2017 from the official website for free.
Attention: there is no Russian version of the program, all attempts to find it will lead to downloading pirated software infected with malicious code.
What is the program for?
Let's see how the HDD Regenerator disk treatment program works and why it is needed at all. The fact is that a hard drive, hard drive or “screw” is one and the same device. It consists of a metal sealed housing in which a spindle (axis) rotates with one or more aluminum plates put on it in the form of disks.
It is on the surface of these disks, or rather, on the magnetic layer deposited on top, that information is recorded. Sometimes, due to old age or factory defects, some places of the magnetic layer lose their original properties and their magnetization. As a result, information is lost in such areas, and recording becomes impossible.
The essence of HDD Regenerator is to find such areas, and transfer their coordinates to the Windows operating system, so that the latter can carry out the reassigned sectors on the hard disk, therefore, its “treatment”. That is, now the bytes of information will be written bypassing the “broken” sectors, as a result of which the volume of the disk will slightly decrease, but the number of errors will also be greatly reduced.
You can also use HDD Regenerator to diagnose digital media, for example, you can repair USB flash drives, memory cards, etc.
Video instruction
You can also see everything written in the article in the video that our author recorded for you. We recommend that you watch the video to the end and only then start downloading the software.
Installing HDD Regenerator
Consider installing HDD Regenerator on your computer or laptop. You can “treat” unstable sectors on your hard drive both from under Windows and through the PreOS mode, which allows you to perform a deeper analysis and 100% fix all failures. We will consider all existing options below in the form of detailed step-by-step instructions with pictures.
First of all, we will have to install the application on a computer or laptop. Then you can either start scanning, or write the program to external media and boot from it. However, first things first.
- Download the program using the button below and run the resulting installer.
- We are waiting for the preparation of the application for installation.
- The installation is started by clicking on the button labeled Next.
- We accept the application license by checking the box marked with the number 1 and clicking the Next button.
- If necessary, change the installation path, then proceed to the next step.
- We are waiting for the end of copying all the program files in their places.
- If the Launch the program checkbox is checked, then after clicking the Finish button, the application will start on its own.
This completes the installation of HDD Regenerator on a PC, and we are moving on to analyzing the options for launching it.
How to use HDD Regenerator
You can work with this software from Windows itself, as well as by downloading and installing it on an external drive. The second option is much more preferable, since often when the OS is running, the disk is busy with some processes and HDD Regenerator cannot access it.
The application is able to work not only with hard drives, but also memory cards, flash drives and even SSD drives.
Starting from the Windows desktop
The first and easiest way to repair a damaged disk is to run HDD Regenerator while Windows is running. We will now consider it:
- Press the Regeneration button of the main menu and select the item circled in red.
- Sometimes a warning may appear stating that your hard drive connection is using a non-SATA port. If so, you can try rebooting into the BIOS and select the desired interface there.
- Access to the functionality of HDD Regenerator can also be obtained from the system tray of the operating system. To do this, simply right-click on the program icon.
- This is what the context menu looks like. It contains a number of functions:
- Launching the shell of our application.
- Display S.M.A.R.T information.
- Turn notifications on and off.
- Exit from the program.
This is how the S.M.A.R.T data of our hard drive looks like.
This is how application alerts are configured.
- To purchase the application, open the Full Version menu and select the Serial Number item.
The program is paid, but the functions provided by the free version are enough for the average user, so it is not necessary to buy HDD Regenerator.
- We continue our instructions. First, select the disk with which we will work.
- Select one of the modes by entering the desired number and pressing Enter:
- Here we simply enter the number 1 and press Enter.
- We are waiting for the process to complete. The yellow rectangle displays the temperature of the hard drive, if, of course, it is equipped with an appropriate sensor.
Attention: when the program is running in any mode, no user data will be affected.
- If we press Esc , the process will pause and we will see the pause menu. Here are the possibilities:
- continue scanning;
- showing statistics;
- change of addresses of the beginning/end of the check;
- change of operating mode;
- exit from the program.
- The progress of verification and corrections is displayed as a white bar on a black square. In our case, no failures were found.
Sometimes this mode of operation of HDD Regenerator does not work due to the fact that the disk is busy with some process. The option described below does not lead to such difficulties.
Using a flash drive
Let's look at how to write our application to external media and start scanning from it.
- Open HDD Regenerator, go to the Regeneration menu and select the option to create a bootable flash drive.
- We make sure that the desired media is displayed in the list, select it and click OK.
- We are warned that all data from the flash drive will be deleted. We agree and click OK.
- You will then be notified that the process has completed successfully. Click on NO.
- We restart the computer, then we start it from our boot drive and, by indicating the number, select the disk we need.
You can read about how to configure BIOS and start the PC from a removable device in the instructions from your computer.
- We select the verification mode, exactly as we did from under Windows. In our case, this is the number 2.
- We start fixing "broken" sectors by entering the number 1 and pressing Enter.
- We start disk recovery using HDD Regenerator by entering the number 1.
- The process of scanning and fixing the HDD at the same time will begin. We are waiting for its completion.
- This is what the end result looks like. If you have bad sectors found and you see a red inscription "delays detected", the program will mark them and mark them as problematic. In our case, everything is clean.
After that, the PC can be restarted.
Bootable CD/DVD
In the same way, you can create bootable optical media. It can be a CD or DVD. We select the desired menu item and, similarly to the case described above, write the data to disk.
Advantages and disadvantages
To complete the picture, we suggest that you familiarize yourself with the positive and negative features of the program.
Advantages:
- ease of use;
- efficiency;
- the ability to run from external media;
- good performance;
Disadvantages:
- absence of the Russian language.
Thanks to our article, you can easily learn how to work with the program, and Russian localization is simply not needed.
System requirements
For the correct operation of our application, you need a computer or laptop with the following minimum parameters:
- 1 GHz CPU;
- From 512 MB of RAM;
- Screen resolution from 640x480;
- The video card does not affect the work.
You can run the software on weaker configurations, however, there will be no guarantee of correct operation in this case.
Program analogues
You can also restore the HDD surface using similar programs for disk treatment:
- CrystalDiskInfo;
- Victoria HDD;
- HDDScan;
- MHDD;
- HDD Low Level Format Tool.
Download HDD Regenerator
You can download the latest version of the program we are considering by clicking the button below.
Summing up
Well friends, we will end here. If you have a question on the topic of working with HDD Regenerator, feel free to ask it in the comments, we will try to give an exhaustive answer as soon as possible.
So, let's get down to business. Consider how to use the hdd regenerator 2011 program. First, download and install the program. Before using the program, disable all programs that work with the hard drive. For more comfortable use of the program, you can download and install the crack. It should be accompanied by instructions on how to use hdd regenerator 2011 rus, which will help you install the crack without any problems. We strongly recommend that you strictly follow the instructions, otherwise the uninterrupted operation of the hdd regenerator program is not guaranteed.
After starting the program, a dialog box appears. In order to check and repair the HDD in the system shell, you must click the top button "Click here to repair bad sectors of the disk directly from under Windows (XP/Vista/7)". In the window that appears, select the partitions of the disk that should be restored. 
Sometimes the system notifies that the SATA HDD is in ANCI mode. To fix this, we restart the computer through the BIOS and select SATA IDE as the mode. Often this is not possible, and a dialog box constantly pops up during the check. We select the "Cancel" button, a command line console appears with 4 items:
- Calculation and regeneration of bad sectors and partitions.
- Full disk scan with/without data recovery
- Software version.
- Information about the work done by the regenerator program.
- Select item 2 and Start, the HDD check process has begun.
Note that hard disk recovery in this way does not always bring excellent results. What to do in this case?
A bootable flash drive will help us.
To work, you need a flash drive with a capacity of at least 1 GB. Having launched the hdd regenerator program, select "Create a bootable USB flash drive" and wait until it is formatted and boot data appears on it. We restart the computer. In this case, you need to go into the BIOS and select the priority for loading the OS through a USB flash drive.
A DOS window appears. It is necessary to select sections for diagnostics and regeneration. After selecting the required one, click Start. The process has begun.
To interrupt the scan, you need to press "Esc", but what results will be unknown. Therefore, it is best to wait for the process to complete.
If the HDD has suffered significant damage, then the hdd regenerator will "slow down" when processing sectors, while the operating time may last for several hours. Then you have only one way out - to buy a new HDD and transfer to it the information that still remains thanks to the hdd regenerator 2011 program.
The hard drive is one of the most important elements of a computer. In order to avoid serious problems with the computer, it is necessary to monitor the condition of the hard drive. If you are thinking about checking the status of your hard drive, then it is best to do this procedure using the program HDD Regenerator .
HDD Regenerator is unique in that it allows you to recover bad sectors of your hard drive, unlike other programs that simply hide them. The first serious signs of hard drive problems include:
1) Long opening of folders and files;
Steps to check your hard drive.
2. To use HDD Regenerator, it is best to create a bootable USB flash drive or disk with the program, but the easiest way to start checking is to boot from Windows.
To do this, launch the main program window and open the tab in the upper left corner "Regeneration" , and then select "Start Process under Windows" .
3. In section "Choose Drive to Process" select the drive that will be scanned and repaired, and then click the small item Start Process .
4. The program will warn you that in order to start the scan, you must close all programs running on the computer. Close as many programs as possible, if possible.
5. A black window will appear in which control is not carried out by the mouse, but exclusively by the keyboard. First, let's do a normal scan, in which you can choose whether to repair bad sectors or not. This option is under item number 2 , so type that number on your keyboard and press the Enter key.
6. In the next step, the program will prompt you to choose whether you are going to restore bad sectors or if you want to limit yourself to checking with a report. By selecting the number 1, the program will start checking for errors, followed by correction, the second item will only perform a check.
7. Monitor the progress of the process. The bottom of the window will display the completed process, the number of bad sectors found and the number of fixed sectors.
8. Once the HDD Regenerator process is completed, the program will display a detailed report on the number of errors found and fixed.
Separately, I would like to note the item "Delays detected", which denotes a delay. If the number in this item is too high, then, most likely, the disk check was carried out for a very long time. This indicates that the hard drive is worn out and damaged. In this regard, it is more expedient to replace it.
Conclusion. Of course, HDD Regenerator is not a 100% solution for everyone. As far as possible, the program can help with the recovery of bad sectors, but if the disk is excessively damaged, then the program is already powerless.
Among all the possible ways of storing data, despite their great variety, the hard disk does not lose its popularity today. Not everyone dares to upload important information to the cloud, no matter how tempting the terms of using the service may seem, external media are also not always suitable for certain tasks, many users prefer to store personal information on internal drives due to the reliability of devices. At the same time, HDDs are also prone to malfunctions, which in many cases provokes failures in the operation of the operating system installed on the disk, or lack of access to user data. Neither one nor the other options are acceptable, so the issue requires an immediate solution. In the event of a complete failure of the hard drive, everything is easier, it will need to be replaced, but most often users are faced with the problem of bad sectors, which are not readable. To diagnose and restore the hard drive, specialized software is used. One of the most successful software solutions is HDD Regenerator.
Setting up and working with the HDD Regenerator program.
The HDD Regenerator application is a simple and effective tool for recovering bad sectors and the surface of a magnetic hard disk. The software uses a special surface magnetization reversal algorithm, while the structure of the data recorded on the disk remains the same. The Winchester or Hard Disk Drive, being a mechanical device consisting of several round plates, an electric drive and an information read / write head, wears out over time. Disks made of magnetic material on which information is applied rotate at high speed during HDD operation, and the head moves over their surface, performing data processing. In the event that some sections have lost their properties, writing to them becomes impossible, and reading of previously recorded files is not carried out.
The HDD Regenerator program can detect damaged areas on the disk and repair. When uncorrectable sector errors are detected, the task is to reassign the address of the failed memory cell (one of the reserved values is assigned). Thus, writing will not be carried out on bad sectors, which will slightly reduce the size of the hard disk, but also reduce the likelihood of errors. During a deep scan, the software detects and fixes problems with the surface, with the help of HDD Regenerator, a complete regeneration of the surface is performed using the magnetization reversal algorithm. You can also use the application to diagnose digital media (USB flash drives, memory cards, SSDs, etc.).
Main functions of the program
The software differs in that scanning is performed at the physical level, which ensures interaction with unrecognized, unformatted HDDs and all popular file systems. The media to be recovered retains all existing data. After installing the software, it is possible to create a bootable CD / DVD or flash drive, in order to use it if the operating system cannot be loaded. The developer improves the functionality of the product with each update, the latest version of HDD Regenerator 2018 offers comprehensive diagnostics and hard drive recovery. The main features of the program are:
- Low-level access for diagnosing the physical surface of the HDD.
- Detection and treatment of bad sectors, checking for errors and correcting them automatically.
- Identification of physical damage to the surface of the HDD, elimination of detected problems, regeneration by the remagnetization method.
- Possibility to pause the recovery process if necessary.
- Real-time monitoring of the hard disk status, notification of changes.
- The S.M.A.R.T function allows you to evaluate the current HDD status, operating time, etc.
- Displaying information about the HDD (general characteristics, temperature, devices, degree of fragmentation and other data).
- Detailed statistics of performed procedures.
- Create bootable media for use in situations where, due to problems with the HDD, it is impossible to boot the system. When starting from the drive, the program starts and operates in DOS mode.
- Ability to work in a Windows environment, regardless of the OS version (starting with XP).
It is easy to use the program of any version, whether it is HDD Regenerator 2011, 2016-2017 or 2018. You can download the software in a shareware version, but activation is required to use all the features. With a license key for HDD Regenerator, the user will have access to full functionality for an unlimited period. The HDD Regenerator program has a convenient and intuitive interface, not overloaded with numerous submenus and unnecessary elements, the Russian language is supported, the functionality is easy to learn, which allows even an inexperienced user to use the tool.
Installing HDD Regenerator
To take advantage of the software's capabilities by running it from a USB flash drive or in a Windows environment, first you need to download the distribution kit and install HDD Regenerator on your computer. The key and crack are in the archive along with the installer. In general, the procedure is similar to installing any other software, so there are no difficulties with this. We perform the following actions:
- Download the program and run the installer.
- The installation wizard will prepare the application for installation, after which we start the procedure by pressing the “Next” button.
- We agree to the terms by marking the desired item, and click "Next".
- By default, the program will be installed to the Program Files folder located on the system drive; if desired, the installation path can be changed by specifying a different directory. Click "Next" and wait for the procedure to complete.
- If you check the box "Launch the program", the program will start when you click the "Finish" button. An application icon will also appear on the desktop.
You can run HDD Regenerator directly from the Windows environment or burn it to an external drive to start from it.
How to use HDD Regenerator
Thanks to a clear interface, not burdened with a lot of settings, and a convenient navigation system, working with the program is easy even without a localizer. There are several options for launching the software: from a shortcut on the desktop, from a USB flash drive or an optical disc. Let's take a closer look at how to properly use the HDD Regenerator program. The interface offers several tabs, when you go to each of them, functions are available that allow you to check and restore the hard drive, as well as burn software to media.
The technology allows you to diagnose the HDD, which should be done before the recovery procedure. It is possible that the hard drive is fully functional and the cause of operating system errors or other software problems is not at all in it. To do this, go to the S.M.A.R.T section, the program will analyze the state of the HDD and display information about the health of the hard drive. If you see a status other than “OK” in the status, you will need to perform the recovery procedure.
How to restore a hard drive
In the program window, you will see an offer to scan the hard drive, as well as create boot drives. When it comes to troubleshooting a hard drive, there are a few steps that need to be taken. First you need to close all active programs, except for HDD Regenerator, and end the processes. Recovery instructions:
- Go to the “Regeneration” section and select “Start Process under Windows” from the list.
- In the next window, you need to select the hard drive so that HDD Regenerator starts the recovery procedure, then click "Start Process".
- A window will open with a user interface based on text input from the keyboard and text output of the results. To select the type of scanning and recovery of the disk from the list of available actions, press "2" on the keyboard (Normal scan) and the enter key.
- Now press "1" (Scan and repair) and Enter to check and fix the found bad sectors.
- In a new window, you need to select the starting sector by pressing "1" and the enter key, after which the scanning process for errors will be launched, the progress of which is displayed in the program window. If errors are found during the check, HDD Regenerator will correct them. The process will take some time. Upon completion of the procedure, the user is provided with reporting information on the work performed (the number of bad sectors, fixed and not subject to recovery).
How to burn a flash drive
The program also offers the option to create a bootable USB stick or disk. To carry out the procedure, we connect the USB flash drive to the USB connector on a computer or laptop and perform the following steps:
- In the main window of the HDD Regenerator application, click the "Bootable USB Flash" button.
- We select the USB flash drive that should be made bootable (if several USB devices are connected to the device, they will be displayed in a list) and click "OK".
- A warning window will appear informing you that all information from the USB drive will be erased, we agree with this by confirming the action with the "OK" button.
At the end of the process, you will have a boot drive where you can copy the program to boot with the possibility of treatment outside the operating system of the computer.
The procedure is similar to the previous one, only to burn a disc, you need to insert a CD / DVD disc into the drive and press the “Bootable CD / DVD” button in the main application window. Next, the required disk is selected and by clicking "OK" the process starts. To use software tools from a bootable drive, whether it be a flash drive or a disk, you must specify in the BIOS the boot priority from removable media.
Advantages and disadvantages
The HDD Regenerator software solution provides the user with the opportunity to independently deal with the problems that have arisen with the HDD, without resorting to the services of service specialists. Among the advantages of the software:
- Intuitive, user-friendly interface and ease of use (even in English version).
- Russian language support.
- Work in Windows OS of any version, starting with XP and independence from the file system.
- The ability to work both in the Windows environment and outside it (using a boot drive).
- Recovery of damaged sectors.
- View statistics about recovered hard drive sectors.
- Monitor HDD status in real time.
- Creating a full-fledged boot device from an optical disc or USB flash drive.
- The ability to pause the process of scanning the hard drive, so that later they will return to the procedure.
- Security of the recovery procedure for user data.
The disadvantages include the following points:
- The full version of the product is paid.
- The absence of the Russian interface in the official release.
At the same time, you can use the free version, its functionality is quite enough for basic tasks, and for those who want to use the program with the Russian interface, it will not be difficult to use the crack.
As you can see, there is nothing complicated in working with HDD Regenerator; you don’t need to study the settings in depth. With the help of this software, you can restore the hard drive to working capacity without much effort in just a few clicks, as well as create a bootable drive, which helps a lot in case of force majeure.
The hard disk drive (HDD) of a personal computer is the most vulnerable device, since its design uses many mechanisms through which data is read. However, due to such advantages over integrated memory units as speed and the ability to format without losing HDD clusters, it is still used in PC architecture. With intensive long-term work, mechanical damage to the hard disk is often observed, which can lead to the loss of some information.
How to recover HDD?
The main reason for the incorrect operation of the HDD is "broken" sectors, the reading of which is not possible. Often, PC owners, when a hard drive fails, try to “reanimate” them on their own, which can lead to even more unfortunate consequences, and specialized information recovery services require a rather high payment for their services.
It should be noted that in some cases we are not talking about restoring the working capacity of the HDD at all, because only the information that is contained on the hard disk is important. For these reasons, the only true method to implement access to lost data is specialized software.
In this article, we will consider the HDD Regenerator program, which is often used for professional purposes by many services. The main difference between HDD Regenerator and many similar programs is a low-level algorithm that allows, through integration into the DOS environment, access not only to the HDD itself, but also to control and restore sectors and disk memory cells, as well as participate in monitoring and control of hard drive mechanisms using hardware methods.
For these reasons, HDD Regenerator really restores "broken" sectors, preserving the information that was stored in them, and does not demagnetize and remove them from the general array. Initially, we need to download and install HDD Regenerator on a PC. In order to describe in more detail the process of the hard disk recovery program, we will consider the functionality of the software through the Windows interface.
So, after installing and running HDD Regenerator, a dialog box appears in front of us.
Operation of HDD Regenerator directly in OC Windows.
To check and restore the HDD in the system shell, click on the top line indicated in the photo. You will see a window for selecting hard disk partitions that need to be restored.
Sometimes there is a warning that your HDD controller SATA works in mode ANCI. To fix this error, you need to reboot through the BIOS and set SATA as the working mode IDE.
Remember! When using this program, you must disable all applications that access the hard disk during operation (antivirus software, search indexing, etc.).
It often happens that this is not possible, which is clearly demonstrated by the dialog box that constantly appears during the verification process.
In order to avoid such messages, press the button " Cancel« , as a result of which the Command Line console appears in front of us, where four points are indicated.
1. Diagnostics and scanning of "broken" sectors and partitions.
2. Full HDD scan with/without data recovery.
3. Software version.
4. Information about the results of the HDD Regenerator.
Pressing the key as an example 2 And Input and monitor the progress of the hard disk check.
It should be noted that HDD recovery by this method does not allow for complex hard disk, therefore it is very inefficient in some cases. How to restore the computer hard drive?
HDD recovery via bootable flash drive
To do this, you need a flash memory of at least 1 GB. When you start HDD Regenerator, click on the item " Create a bootable flash drive“and wait until the data on it is formatted and the boot data is placed. After that, the program will prompt you to restart the PC, which we do.
In the process of rebooting the PC, you need to go into the BIOS and set the priority for loading OC Windows through the bootable flash card!
After that, a DOS window will appear in front of us, in which we will be asked to select partitions for analysis and recovery.
Select the required directory and click Input. Everything. The process has started and now we can only wait for the results.
Remember that you can stop the scanning process with the Esc key, however, in this case, no one guarantees correct results, so you should wait for the full recovery process to complete.
In case of significant damage to the HDD, the program will “freeze” while processing a particular sector, and the duration of the program may be several hours. In this case, there is nothing left but to purchase a new HDD and overwrite on it that part of the information that was recovered using HDD Regenerator.