Noise measuring instruments. Instruments and methods for measuring noise in the workplace

In the event that noisy neighbors live near you, you must fix the noise level (English to fix the noise level) and punish violators of silence.

Sanitary standards allow noise up to 40 decibels during repairs. If you think that the neighbors have exceeded this threshold, order a noise level measurement service. Our specialists are ready to go to the site at any time for this.

If a person is constantly in a noisy room, it affects his body. Increased noise can disrupt sleep, reduce immunity, lead to stress and headaches. Loud noises are not just annoying, they may well lead to complete or partial hearing loss.

Increased noise levels are dangerous not only at home, but also at work. A person spends at the workplace, as a rule, 6-8 hours, and if all this time he is affected by noise, then soon he will have serious health problems. Therefore, noise levels should be regularly measured at workplaces.

Professional noise level measurement

To measure noise, we use sensitive equipment that captures the noise and displays the value in decibels. A device that measures noise consists of a microphone, electronic circuits and a display. The microphone detects small vibrations associated with sound and converts them into electrical signals. These signals are then processed by an electronic circuit. The display then shows the sound level in decibels. The device measures the sound pressure level in an instant at a specific location. If you want to carry out soundproofing work, we will check the soundproofing of the walls, ceiling and floor.


Prices for leaving the Moscow Ring Road
Distance from MKAD Departure cost
up to 20 km. 500 rub.
from 20 to 50 km. 800 rub.
from 50 to 80 km. 1200 rub.
from 80 to 100 km. 1700 rub.
from 100 to 120 km. 2200 rub.
from 120 to 180 km. 3000 rub.
from 200 km. 3000 +1500 rub. (accumulation).

Our specialists have not only modern equipment, but also deep knowledge in this area. Our team consists of professionals with higher education and many years of experience. This suggests that we will carry out the most accurate measurement of the noise level - quickly and inexpensively.

Noise measurement procedure

We will carry out the procedure in accordance with all sanitary standards and requirements. We carry out noise measurements not only in residential premises, but also in offices, on, on an industrial site. After identifying the source of the noise, we will give recommendations on how to protect against it.

We work seven days a week and holidays, so you can contact us at any time. After the procedure for noise level measurement, we will issue the relevant documentation with the results of the check.


It is even difficult to imagine modern life without various familiar sounds - the rustling of cars on the highway, the alarms, or the uniform hum of ventilation devices in the workplace. The constant impact of noise on hearing can lead to both positive results - improved mood, normalization of blood circulation, as well as an improvement in general tone, and sharply negative results - deterioration in well-being and hearing, a number of diseases, increased irritability.

A qualified noise level measurement with the help of experts from the SES of Moscow will be able to establish the maximum value of this impact, as well as improve the situation in production, receive payments and compensation based on expert findings. Contact us - we will measure the noise level, do our best to professionally document everything and provide it to the relevant supervisory authorities to establish all the circumstances of the case.

What negative impact does noise have on humans?

Very unwanted or unpleasant sounds caused by fluctuations of various frequencies, as well as intensities, are quite capable of greatly interfering with the implementation of productive rest, efficient work, good sleep, and also have a purely negative effect on all human health. Measurement of the noise level in many megacities led researchers to rather unpleasant conclusions - over 80% of the inhabitants of large cities are constantly exposed to excessive noise, and 50% of diseases in production are associated with regular sound vibrations.

Exposure to constant background noise can lead to a whole "bouquet" of problems and complications:

  • metabolism is disturbed, and the pulse, respiratory rate also changes;
  • there is an early development of various cardiovascular diseases;
  • unreasonably high blood pressure;
  • permanent or unreasonable stress may develop on an ongoing basis;
  • there is continuous insomnia, there is a significant slowdown in reactions.

Naturally, noise level measurement can only be carried out by professionals who have the necessary equipment, experience, knowledge and skills to be able to come to the rescue in time in the most difficult situation. Also, our specialists act in accordance with the established norms of the SanPiN 2.1.2.2645-10 legislation, which allows us to present the results of research in court, as well as to establish the amount of material satisfaction of a claim for non-compliance of safety regulations with the established rules.

When might our services be needed?

Professional measurement of the noise level in the apartment is not the only task of our specialists. Also, we successfully solve the following tasks for our clients:

  • assess the noise level to establish the necessary working conditions;
  • we make measurements at the request of Rospotrebnadzor in the process of construction;
  • after the construction of the building and its commissioning, so that the residents do not feel additional discomfort;
  • in the case of organizing complex environmental monitoring of a particular natural zone;
  • we measure the noise level in the apartment if it exceeds the established norms and interferes with normal life;
  • noise level measurement may be necessary to justify a new type of ongoing production activity;
  • in commercial and industrial areas.

In case of operational necessity, we will be able to go to you even in the Moscow region or further, you will only need to write or leave an online application - we will definitely come to your aid and do our best to deal with your difficulties safely, effectively, saving time, money funds and getting the best result!

Basic rules for noise measurements

Noise measurement is far from being such a simple procedure, it requires strict adherence to the following key conditions:

  • it is mandatory that there are no sound-reflecting surfaces within the measurement area in order for the results to be plausible;
  • the background noise level must be 6-10 dB less than the sound pressure level;
  • when measuring the noise level, it is imperative to take into account the speed and strength of the wind, which can both unnecessarily overestimate and overestimate these indicators, making them unnatural;
  • a qualified noise level measurement should be strictly carried out only if there is no precipitation outside, and the pressure is normal and does not undergo a sharp rise.
​

Self-measurement of the noise level will be a completely wrong occupation, since it may not correspond to the truth, which is why the help of people with serious experience in this direction is needed.

How are residential measurements taken?

To measure the noise level in rooms, the following important factors are studied:

  • what floor is the dwelling on, what materials are the walls and load-bearing structures made of;
  • with the help of sound level meters, studies are carried out with closed and open windows in order to obtain true indicators;
  • night noise measurement can be implemented to obtain a completely objective picture;
  • household appliances are assessed - refrigerators, air conditioners, ventilation objects of the room, which is also fully analyzed in the subsequent study of the situation;
  • if construction and other works are carried out nearby, then the noise level is determined in the immediate vicinity of the object under study.

After carrying out all the necessary measurements and establishing all the accompanying circumstances, the specialist makes his decision in a documented form.

Why is it best to contact us?

Turning to the services of the SES, you will definitely guarantee the full compliance of the implementation of procedures with all the necessary rules and state standards, as well as the availability of all the documentation required for this organization. All noise meters are extremely accurate, are included in the register of permitted equipment and have the highest accuracy class. All studies are carried out by professional specialists with extensive experience, an individual research program is developed, and the cost of the services offered will be extremely democratic even for individuals who do not have serious financial wealth!

How to contact us?

To use our help, you will need:

  • call us and explain the essence of the problem;
  • we go to the place, conclude an agreement and make all measurements;
  • we implement a report on all indicators taken into account in an expert form;
  • we provide its results to customers or transfer them to other authorities;
  • we act according to the individual requirements of customers, we carry out measurements at different times of the day.

We are consistently improving the range of our capabilities, we have prepared favorable discounts and special offers for regular customers so that cooperation with us is as simple and comfortable as possible! You can be convinced of the benefits of cooperation with SES due to the presence of positive feedback on our activities from customers who are satisfied with the solution to their problem!

Other services of the sanitary and epidemiological station:

  • Eastern Administrative District (VAO)- Address: 111141, Moscow, 2nd Vladimirskaya street, 46, building 2;
  • South-Eastern Administrative District (SEAD)- Address: 109125, Moscow, Volgogradsky prospect, building 113, building 5;
  • Southern Administrative District (SAO)- Address: 115682, Moscow, Orekhovy Boulevard, 26, building 2;
  • Southwestern Administrative District (SWAO)- Address: 117485, Moscow, Butlerova street, 7A;
  • Western Administrative District (ZAO)- Address: 121309, Moscow, Bolshaya Filevskaya street, 33;
  • Northwestern Administrative District (SZAO)- Address: 123182, Moscow, Academician Kurchatov street, 17.

Write to us

For all questions, including feedback and wishes, offers of news and materials, as well as for cooperation, you can write to us using the form below. And we will try to answer you promptly. Thank you!

If you apply today and make payment, then get up to 30% discount from the cost of services.

The noise level meter reads sound waves and converts them into a digital value. When choosing a model, consider 3 main characteristics:

  • The volume of the measured sound: from 20 to 140 dB.
  • Measurement accuracy: frequency range from 20 Hz to 8 kHz.
  • Speed ​​and duration of measurements.

According to sanitary standards, the noise level in places where you spend the most time should not exceed 55 dB during the day and 40 dB at night. This is the volume level of the conversation. Above 70 dB, the nervous system begins to experience overload and stress. At 100 dB, physical hearing impairment appears.

The sound level meter picks up sound waves and displays their digital value on the display. The stronger the sound affects the membrane, the more voltage the sound level meter shows.

Device:

  • microphone;
  • signal amplifier;
  • filters;
  • detector and indicator;

Filters are needed to generate a frequency that is identical to the human auditory perception (the ear perceives sounds with different effort).

There are 4 types of filters:

  • BUT(low volume 20-55 dB).
  • B(average noise level 55-85 dB).
  • With(for noise 85-140 dB).
  • D(special filter for working with very loud noises).

The accuracy of the device depends on its class:

  • 0 – exemplary measuring instruments (frequency range from 20 Hz to 18 kHz).
  • 1 – models for laboratory measurements (frequency range from 20 to 18 kHz).
  • 2 – technical measurements (range from 20 Hz to 8 kHz).
  • 3 – approximate measurements (range from 31.5 Hz to 8 kHz).

In addition to sound intensity, sound level meters also measure its duration:

  • F (fast)– for measuring constant noise.
  • S (slow)- intermittent noises.
  • I (pik)- impulsive.

What to look for when buying:

  • When choosing a noise meter, determine exactly what approximate noise level you will be working with. There is no reason to buy a professional expensive model if you are not an engineer who does this all the time. The best option for domestic needs is a class 3 model.
  • The basic package of the noise level meter includes a tripod, an additional microphone, protection from the external environment (if you work outdoors) and a case.
  • The function of comparing indicators and results will not be superfluous.
  • It is also very convenient if the readings from the device can be instantly reset to a PC.

Multimeters can be singled out as a separate group - this is a "compact laboratory" for assessing the environment. They find static electricity, check circuits, determine current strength, voltage, resistance capacitance and frequency. The multimeter is a thermal detector, a noise, humidity and light meter in one housing.

On the site "220 Volt" you can buy a sound level meter by paying for it in a convenient way: in cash, by card, webmoney or bank transfer.

Sounds surround us everywhere - only in rare cases can a modern person completely immerse himself in silence. In this regard, the importance of regulation of noise parameters increases. In the workplace, for example, there are special requirements for the organization of working conditions. The list of such requirements certainly includes optimal indicators of sound exposure. However, a noise study may also be required in other situations - in a medical facility, in public places and, of course, in the home. For this purpose, special devices are used - sound level meters. But first, it is worth understanding the very nature of sound.

Sound sources

Most of the sources of urban noise are formed by anthropogenic For example, vehicles, air flows that pass between buildings, engineering systems, etc. As a rule, the causes of this kind of noise are negative, since they are dominated by low frequencies, as well as a chaotic change accents across the spectrum. This can be judged especially by the work of industrial enterprises and

Of course, the most favorable, from the point of view of acoustics, situation is noted outside the city. In this case, the source is nature itself. One of the most soothing and relaxing is the sound of the sea, which is characterized by periodic and pronounced fluctuations. The unhurried and monotonous sound creates a unique and attractive marine rhythm that strengthens the nervous system.

Device device

In today's sound level meter market, digital instruments are popular today. They are small in size and have a robust plastic case, which is complemented by a microphone - however, this element can be integrated into the device. The device also includes an amplifier, filtering elements, an indicator and a detector. Actually, the human ear has many parts that are similar in functionality. In turn, a special technique allows you to perform a noise study with the fixation of several parameters at the same time. Filters capture sounds with different frequencies, and information about the measurements taken is reflected on the screens in decibels. As far as power is concerned, most sound level meters are powered by a rechargeable battery, the charge of which can vary from 50 to 70 hours.

Principle of operation

As for the principle of operation, in this case it is more appropriate to compare the device with a microphone. The main difference will be that the sound level meter interacts during the measurement process with a voltmeter calibrated in decibels. Since the electrical flow signal at the output of the microphone is equivalent to the original noise, the addition in the acoustic pressure level that acts on the membrane will cause a similar increase in the voltage of the current when it enters the voltmeter. This is the principle on which the measurement of noise is based, the indicators of which are reflected on the display. To perform measurements of indicators, the signal is passed through special filters - this is done at the moment when it is on the way from the microphone to the voltmeter.

Since the ability of the ear to perceive sound is determined not only by the frequency properties of the noise, but also by its intensity, the devices provide for several types of filtering elements. The choice of a particular device depends on the characteristics of the permissible noise in the measurement area. Filters make it possible to simulate the amplitude-frequency spectrum under conditions of a given noise power.

Technical and operational characteristics

Manufacturers tend to distinguish between models designed exclusively for measuring loudness and devices for universal measurements. Nevertheless, the volume level remains one of the key characteristics of almost all sound level meters - this figure varies from 30 to 130 dB. It is important to note one feature of noise meters. Some models, when operating in conditions where the sound factor exceeds the maximum scale bar, do not perform a noise study at all due to the limitations of their capabilities. The next characteristic is the measurement accuracy. This quality is determined by the error, which can be from 1 to 1.5 dB. Accordingly, the smaller the deviation in the measurements of the sound level meter, the higher its accuracy. The operation of the devices can be affected by the temperature regime. For example, if the range from 0 to 40 °C is indicated, then the device can be used in open areas.

Manufacturers

On the market, you can find devices from specialized manufacturers of measuring equipment, as well as products from well-known construction brands. The first category should include Testo models, which can be called the best in the class. They are distinguished by a wide capacious battery and a wide range of decibel measurements. However, devices of this brand are the most expensive - an average of 20 to 30 thousand rubles. If you plan to study noise in a domestic environment, then you can pay attention to the products of Geo-Fennel and ADA. Firstly, the models of these manufacturers provide good measurement accuracy, and secondly, they are affordable - on average, such devices cost 3-4 thousand rubles.

Measurement of the noise level at the workplaces of enterprises and institutions is carried out in accordance with GOST 20445-75.

According to the rules, in order to assess the noise levels at workplaces in the premises of industrial enterprises, measurements must be made at least at three points. The noise pick-up microphone should be placed 1.5 m above the floor or work platform (or at the height of the head of a person working while seated).

The measurement results should characterize the noise impact during the working shift. Therefore, noise measurement is carried out when at least 2/3 of the installed process equipment is operating at least three times per shift.

When measuring, the total sound pressure levels, the spectral composition of noise in octave bands, as well as the equivalent sound levels in decibels A (dBA), which are normalized by the Sanitary Standards - CH 2.2.4 / 2.1.8.562-96, can be determined

The maximum permissible noise level is the level of a factor that, during daily (except weekends) work, but more than 40 hours a week during the entire working experience, should not cause diseases or health problems detected by modern research methods. Compliance with the remote control does not exclude health disorders in overly sensitive individuals. A sound level meter is used to measure noise levels.

Device and application of sound level meters

Sound level meters are devices designed to measure noise in a free field. For example, a carpeted office with curtains and partitions is a free field. And the basement with concrete walls, without furniture, with a high level of sound reflection is already a reverberant sound field.

The sound level meter device must comply with special state standards that regulate the requirements for such devices. In particular, the frequency range captured by the device is regulated, but the device itself may differ.

The device of the sound level meter contains certain solutions that allow you to create an unambiguous relationship between the readings of the device and the sound pressure that are perceived by the hearing aid. The noise level is proportional to the electrical signal.

The sound level meter is used to measure the noise level in the street and indoors. Physically, the sound level meter consists of a microphone, an amplifier, corrective filters, several detectors and indicators, as well as a voltmeter and a device for outputting measurement results (for example, a display).

Model range of TESTO sound level meters

Sound level meter testo 815

The testo 815 sound level meter has been factory calibrated. To control the error of the instrument, recalibration is recommended, especially when the instrument has not been used for a long time. The testo 815 sound level meter must also be checked with a calibrator before and after measurements under harsh conditions, such as high altitudes, high levels of air humidity, and where special requirements are placed on measurement uncertainty.

The Testo 815 sound level meter has the following advantages:

  • Accuracy class 2 according to IEC 60651
  • Easy adjustment (adjustment screwdriver included)
  • Frequency weighting according to curves A and C
  • Memory of maximum and minimum values
  • Tripod mount (1/4")
  • High level of accuracy (class 2)
  • Switchable time weighing Fast/slow
  • Frequency weighting
  • present value
  • Time weighing
  • Switchable range
  • Good value for money instrument

Sound level meter Testo 816.

Noise level meter, accuracy class 2, with microphone, wind protection cap, battery, headphone socket, in practical case

Compared to the testo 815, the testo 816 is equipped with a number of additional noise measurement features that make it ideal for experts who measure noise levels in the workplace, in production, as well as background noise.

The Testo 816 sound level meter has the following advantages:

  • Accuracy class 2 to IEC 60651
  • High level of accuracy
  • Automatic switch of noise level measurement ranges
  • Backlit display
  • Work from the power supply
  • Display with graphic pointer
  • AC signal output for connection to a recorder or amplifier
  • 10 mV/dB DC output for connection to recorders and recorders
  • testo 816:
  • Time estimate
  • Setting the measuring range
  • Frequency estimation
  • present value
  • Automatic range switching
  • Display backlight
  • Connecting to the mains power supply
  • Histogram display
  • AC output for connection to recorders and amplifiers,
  • DC output with 10 mV/dB for connection to recorders and data loggers
  • good price-quality ratio and price-functionality

Portable sound level meter Megeon 92130

Portable sound level meter Megeon 92130 is a unique combination of technical characteristics, practicality and ease of use. All necessary controls are located on the front panel of the device. The listed functional features allow using Megeon 92130 and measuring noise parameters in almost any conditions. The device has an integrated light sensor, the signal of which turns on the backlight of the display if you work in a poorly lit room. This sound level meter is used by engineers in many industries, safety and health professionals, as well as for assessing the noise environment in offices, transport and the environment. It should be noted that the Megeon 92130 sound level meter operates in a wide range from 30 to 130 dB and complies with generally accepted international standards ANSI S1.4 (type 2) and IEC651 (type 2).

Sound level meter Megeon 92131

The new sound level meter Megeon 92131 is a high-precision measuring device used for accurate and fast determination of sound parameters indoors and outdoors. This device is very popular among technicians and engineers, as it offers excellent technical characteristics and has a low weight and compact dimensions. Sound level meter Megaon 92131 makes it possible to measure noise in a wide range: from 40 to 130 dB.

It should be noted that the measurement error does not exceed 2dB. The device has a built-in connector for connecting a frequency analyzer, thanks to which the user can observe the studied noise in the form of a graph. Megaon 92131 is equipped with a simple user interface. The display simultaneously shows the level of the studied sound in the form of a histogram and digital form. All controls are located on the front panel of the instrument.

The device can be additionally equipped with a USB cable, which makes it possible to transfer the results to a PC for further analysis. Simple operation, light weight, and compact dimensions make this measuring tool an indispensable assistant, both at home and at industrial facilities.

Model range of sound level meters MEGEON

Buy sound level meters profitably

You can buy reliable sound level meters at a bargain price in our company. A large selection of sound level meters from the world's leading manufacturers is always presented in our company. Qualified specialists of our company will help you choose a sound level meter that best suits your task for measuring the noise level in your conditions.

We will deliver sound level meters within one or two days to the cities: Taganrog, Novocherkassk, Azov, Shakhty, Volgodonsk, Salsk, Krasnodar, Tikhoretsk, Timashevsk, Sochi, Novorossiysk, Anapa, Tuapse, Gelendzhik, Yeysk, Maikop, Armavir, Volgograd, Elista, Astrakhan, Stavropol, Nevinnomyssk, Mineralnye Vody, Kislovodsk, Pyatigorsk, Zheleznovodsk, Cherkessk, Nalchik, Vladikavkaz, Grozny, Makhachkala.

Noise measurement carried out in order to determine the levels of sound pressure in the workplace and assessing compliance with their current regulations, as well as developing and evaluating noise reduction measures. The main instrument for measuring noise is a sound level meter. The range of measuring noise levels is usually 30-130 dB with frequency limits of 20-16,000 Hz. Noise measurement at workplaces is carried out at ear level with at least 2/3 of the installed equipment turned on. New domestic sound level meters VShM-003-M2, VShM-201, VShM-001 and foreign firms: Robotron, Brüel and Kjær are used. Establishment of noise characteristics of stationary machines produced by the following methods (GOST 12.0.023-80): 1. Free sound field method (in open space, in anechoic chambers); 2 Reflected sound field method (in reverberation chambers, in noisy rooms; 3 Exemplary noise source method (in ordinary rooms and in reverberation chambers) 4 Measurement of noise characteristics at a distance of 1 m from the outer contour of the machine (in open space and in a dampened chamber). The first are the most accurate two methods.In the passport for a noisy car, they look at the sound power level and the nature of the direction of the noise.

The purpose of the measurements is to ensure proper working conditions, obtain objective data about the machine, evaluate the design perfection and workmanship. Measurements are carried out at 3 points, including the workplace. Measurements in the cabs of machines are carried out with closed windows and doors. Instrument base Sound level meter integrating SHI-01; Noise meter VShV-003-M3; Sound and infrasound analyzer OKTAVA-101A.

3. Water supply systems for industrial and residential areas.

Residential area is intended: to accommodate housing stock, public buildings and structures, including research institutes and their complexes, as well as individual communal and industrial facilities that do not require the construction of sanitary protection zones; for the arrangement of intracity communications, streets, squares, parks, gardens, boulevards and other public places. Production area is designed to accommodate industrial enterprises and related facilities, complexes of scientific institutions with their pilot production facilities, utility and storage facilities, external transport facilities, extra-urban and suburban communication routes. With direct-flow water supply of industrial enterprises, water taken from a natural source, after participating in the technological process, is returned to the reservoir in the form of waste (waste) water, with the exception of the amount that is irretrievably consumed in production. The wastewater generated at the enterprise must pass through treatment facilities before being discharged into the reservoir, but not all enterprises have them and wastewater can be discharged into the reservoir without treatment. With this method of water supply for production, large amounts of clean water are taken from natural sources, which is returned to natural environments in a slightly smaller volume, but contains pollutants toxic to aquatic organisms. Waste water - waste water, the further use of which is either impossible due to technical conditions, or impractical in terms of technical and economic indicators.