According to the principle of induction, which is popular in hobs, heat is directed to the contents of the pot, rather than the surface of the stove and utensil in which the food is cooked.
These advances in technology tend to break down like this:
|
The unit turns off immediately after turning on, or does not turn on at all |
|
|
Induction provides low heat |
|
|
The stove lives its own life, turning on by itself, even when there is no frying pan or kettle on the burner |
|
|
The panel does not work at all |
Most often, the owners of induction panels are worried about the complete refusal of the stove to perform its functions: the kitchen assistant turns off after switching on, or does not show signs of life at all. Most often, this situation is provoked by improper use of the unit. It's just that the "smart" panel recognizes the wrong one used for cooking, and declares a "strike" if you decide to cook food in a saucepan made of a material that is not suitable for the unit. Yes, size in in this case matters too!
Advice: want your induction hob to enjoy trouble-free operation? Use suitable pots and pans! The instructions for each product describe in detail which utensils can be used on a particular panel. Do not neglect the advice, and you will be happy in the form of a delicious lunch!
The traditional children's riddle "shines, but does not warm", with the spread of induction hobs, received an unexpected answer: a surface and unsuitable dishes. Poor heating of the induction hob is also a mistake caused by the wrong choice of cookware. The bottom and teapots must be perfectly flat. Even millimeter notches or concavities provoke a decrease in the performance of the unit.
Even more offensive, and even more dangerous, is the spontaneous activation of the panel. Try the following in this situation:
1. Remove from the hob knives, forks, spoons, scrapers, foil - everything that contains metal;
2. Wash the surface to remove any salt deposits.
Did not help? The control unit is malfunctioning. Here you cannot do without a specialist.
The complete absence of any signs of device viability has a number of reasons:
- There is no power in the outlet. You can check it using any electrical device, say, a coffee grinder.
- Blown fuse. To eliminate the malfunction, it is enough to replace the part.
- Broken contact in the circuit. In this case, it is advisable to contact the master.
The main "trick" of working with a laptop is that it is not necessary to connect a mouse to it - you can control the cursor in laptops using touch pad, also called the touchpad. But there are situations when the touch panel fails, and it will no longer be possible to work normally with the laptop.
The touchpad is a touchpad that responds to the movement of the user's fingers and moves the cursor. At first this device seems uncomfortable, but you quickly get used to it, and it seems that it is even better than a computer mouse. But this is the main problem - the user gets used to the touch panel, and no longer uses the mouse. And then suddenly the touchpad stops working. And the mouse is not at hand. And what to do in this case?
We are looking for the cause of the breakdown of the touch panel
More often than not, the touch panel becomes unresponsive to touch due to dirt. Cleaning the touchpad is carried out with a soapy swab, after which it must be wiped wet wipe and let it dry. Do not forget that the panel does not respond to greasy or damp hands.
Also, a problem with the panel can arise when the sensitivity is set too high in its settings. You can change these settings in the "Mouse" item through the control panel.
If not the entire panel does not work, but its individual functions - scrolling or moving the cursor - you need to check for the presence of drivers for the touch panel. To do this, you need to go to the properties of the shortcut "My Computer" and select "Device Manager". If the touchpad is not displayed there, the driver may not have been installed on it. You can find drivers on the disc that comes with the laptop or on the manufacturer's website. It is very important that the driver version is higher than 1.0. Often standard drivers installed incorrectly.
If the touchpad does not work as a whole, then first you need to check the simplest things. For example, the touchpad can simply be disabled. There are several ways to enable the panel:
Use the combination Fn + one of the keys from F1 to F12;
Use the touchpad on / off button (if available);
Enable the touchpad using a utility hidden in the tray;
Disable the mouse, which will automatically turn on the touchpad.
Finally, the last option is that of a touchpad. Over time, everything breaks down.
So, in order to identify the cause of the touch panel malfunction, you first need to exclude the simplest reasons, and if nothing helped, then you already need to contact the service center.
Today, it is customary to use electric, gas and induction hobs for cooking. Each of the options has its own advantages and disadvantages, as well as the nature of the malfunctions. Next, we will tell you what equipment breakdowns are, the reasons for their occurrence, as well as how to repair the hob with your own hands.
Electrical surface
First, let's talk about how to repair an electric hob and what kind of malfunctions this version of the stove may have. Most often, owners are faced with a situation when the hob does not work or one of the burners does not heat up when the power is connected.
In this case, the repair is reduced to the fact that you need to perform the following steps:
Often, finding a breakdown of an electric hob with your own hands is not difficult if you know how to handle a multimeter. In the absence of this device, you can use an indicator screwdriver, which will show the presence of voltage in a certain section of the circuit.
In addition, I would like to tell you why the hob may stop working, so that you know the cause of the malfunctions and how to repair each. So, among the main breakdowns, the following are most common:
The first option is a marriage from the manufacturer, sometimes it happens, as we saw from one of the reviews on the Internet, which said that the Ariston electric hob cracked by itself and the victim was replaced with a new one under warranty. However, another explanation of the malfunction is more common - improper operation, which is described in detail in the instructions for the technique. In the latter case, repairing the hob will be expensive and only through your fault.
How to fix equipment yourself
Induction cooker
If your induction hob does not work, there may also be several reasons for the malfunction. For your attention, an overview of the main faults and methods of repair on your own:
Repair instructions for an induction cooker are provided in the video:
How to repair an induction hob
Gas stove
Well, the last version of the technique, which may fail - gas stove... If your gas hob does not work, there are not many reasons for malfunctions. Usually problems arise with the piezoelectric element and the nozzle from which the gas is supplied. 
So, to your attention, the causes of breakdowns and how to repair the hob with your own hands:
These are all the main malfunctions of a gas hob. Sometimes incorrect work may be caused by improper installation of kitchen appliances. We recommend that you familiarize yourself with those with your own hands!
Complete instructions for cleaning nozzles
Finally, I would like to summarize that most often the electric hob does not work due to a fuse failure or a broken contact. The least often the control unit breaks down, which is already difficult to repair yourself. We hope that now you know why this technique breaks down and what to do for DIY repair!
Related materials:
Good day to you, my dear friends. Glad to see you on my blog. I remembered one incident. I worked at the computer and listened to music at the same time. And then I decided to make it quieter by clicking on the volume control, which is located on the taskbar. Nothing happened, the regulator did not open. I pressed it a couple more times, then I thought about changing the settings. Deaf. Then I decided to reboot, but the start menu did not open either. What the hell is this?
As a result, I rebooted the computer in a different way, but when the system was restarted, the same thing happened - the buttons on the panel did not work. What happened? Why does nothing open? Unclear. That is why in today's article I will tell you what to do if the panel does not work. windows tasks 10.
I will say right away that in 95% of cases this is to blame CCleaner program that I described. By the way, in the same place I said to be careful with cleaning through this application. But if you still run the computer with a cycliner and you have problems with the taskbar, then there is a simple solution.
Get-AppXPackage -AllUsers | Foreach (Add-AppxPackage -DisableDevelopmentMode -Register “$ ($ _. InstallLocation) \ AppXManifest.xml”)
Now just sit back and wait until the whole process is over. It took me about 7-8 minutes. Do not be alarmed by what you see in command line scary red letters. And no need to pay attention at all
When everything is ready, close the window and reboot. The panel may not work for you yet, so reboot in another way, for example, by pressing right click mouse click on the start menu, and then select.
Have you restarted the system? Well done. Now check it out. Now, when you click on the icons, everything should work. Is the problem gone? If not, then the problem must be looked for elsewhere. But so far I have not yet met anyone that would not treat this ailment with the help of this code.
At worst, you can return the system to a different date, i.e. at the time when everything worked. When I didn’t know about this code, it was recovery that helped me out. But it's better to use the code.
Well, on this cheerful note, I end my lesson. I hope you managed to cope with this ailment. And I advise you to subscribe to my blog updates, then you will not miss anything important and interesting. Well, I say goodbye to you for today. Go over other articles. I'm sure you will find a lot of useful information there. Bye Bye!
Best regards, Dmitry Kostin.