Explorer does not display pages. Internet Explorer cannot display the web page - Outline.Extern

If you are having a good Internet connection but Internet Explorer is not displaying the page, you can try the below fixes:

Fix 1: Reset Internet Explorer settings
You can try resetting Internet Explorer settings to what they were when Internet Explorer was first installed on your PC. This can be useful for troubleshooting problems that may be caused by settings changed after installation. Note that resetting Internet Explorer isn't reversible, and all previous settings are lost after reset.
Fix 2: Run Internet Explorer in "No Add-Ons" mode
Internet Explorer add-ons, such as ActiveX controls and browser toolbars, are used by some Web sites to provide an enhanced browsing experience. An error may occur if an add-on is damaged or if an add-on conflicts with Internet Explorer. To determine whether the error is caused by an add-on, run Internet Explorer in "No Add-ons" mode.
You can open Internet Explorer without add-ons using the following step.

  • click start.
  • Select All Programs
  • Click Accessories
  • Under System Tools
  • Select Internet Explorer (no Add-ons).
Fix 3. Scan for malware
Malicious software and viruses can often cause Internet Explorer to slow down or stop working.
If you"re able to access the Internet, go to the Microsoft website to download the Microsoft Safety Scanner , which you can use to check your computer for viruses and malicious software.

Fix 4. Install the latest updates

Running Windows Update can often correct problems by replacing out-of-date files, updating drivers, and fixing vulnerabilities.
  1. Open Internet Explorer by clicking the Start button. In the search box, type Internet Explorer, and then, in the list of results, click Internet Explorer.
  2. Do one of the following:
    • For Internet Explorer 9, click the Start button enter Update in the search box, and then, in the list of results, click Windows Update. In the left pane, click Check for updates.
    • For Internet Explorer 8, in Internet Explorer, click the Safety button, and then click Windows Update.
    • For Internet Explorer 7, in Internet Explorer, click the Tools button, and then click Windows Update.
  3. Follow the instructions on the Windows Update page.
Fix 5: Turn off GPU Rendering
  1. open Internet Explorer
  2. Click Tools > Internet Options
  3. click the Advanced tab, and then browse to the Accelerated graphics section.
  4. Click to select the Use software rendering instead of GPU rendering checkbox.
  5. Click apply, and then click OK.
  6. Close all open Internet Explorer windows, and then restart Internet Explorer.
  7. View the webpage in Internet Explorer.
I hope this helps in fixing this issue.

To eliminate the error, it is necessary (after completing each item, you should repeat attempts to log in to the system):

1. Check if there is Internet access. If you do not have an Internet connection, you should contact your system administrator or ISP.

2. Check the address used to log in to the system (see DNS and IP addresses of the Kontur.Extern servers and system services).

3. Check and perform all recommended actions using the diagnostic service. If the Internet Explorer diagnostic service cannot display this web page, then you need to go to step 4 of the current instructions.

4. Check the strength of the encryption.

To do this, open the menu Help > About in an Internet Explorer window. The "Cipher strength" item must have a value other than zero. If the cipher strength is zero, then you need to reinstall CryptoPro (see How to reinstall the CryptoPro program?).

5.Check if port 443 (https protocol) is open - a secure channel through which communication with the system server is carried out. This can be done in two ways:

  • Follow the link https://mail.google.com . If the message "The page cannot be displayed" appears, then the port is closed.
  • Select menu « Start"> "Run", type telnet in the line<адрес сервера>443 (it is necessary to specify the address of the server on which the user is registered, see Addresses of the servers of the "Kontur.Extern" system). If a console window opens (an empty black window), then the port is open. Otherwise, an error or access denied message will appear.

Telnet to Windows Vista/7/8/8.1/10 is disabled by default. To turn it on, go to Start > Control Panel > Programs and Features > Turn it on or off Windows components» . In the window that opens, check the Telnet Client line.

  • If after opening the port, the error remains, you need to reinstall CryptoPro (see.
  • If the port is closed, contact your system administrator;

6.Disable antivirus software and try to login.

7. If the Internet is accessed through a proxy server, then you should check if the proxy has access to the DNS and IP addresses of the Kontur.Extern servers. To do this, contact your system administrator.

If none of the instructions helped, then you should contact technical support by the address [email protected]. The letter must indicate:

1. Diagnosis number.

To do this, you need to go to the diagnostic portal athttps://help.kontur.ru , press the button « Start Diagnostics » . Once the verification process is completed, the diagnostic number will be displayed on the screen. Specify the assigned reference number in the letter.

2. Files with the results of ping and tracing.

Why does it happen that some sites on the computer open, while others do not? Moreover, the same site can open in Opera, and in Internet Explorer the attempt will be unsuccessful.

Basically, such problems arise with sites that work over the HTTPS protocol. Today we will talk about why Internet Explorer does not open such sites.

Correctly setting the time and date on the computer

The fact is that the HTTPS protocol is secure, and if you have set wrong time or date, then in most cases it will not work to go to such a site. By the way, one of the reasons for such a problem is a dead battery on motherboard computer or laptop. The only solution in this case is to replace it. The rest is much easier to fix.

You can change the date and time in the lower right corner of the desktop, under the clock.

Reboot devices

If everything is fine with the date, then we try to reboot the computer and router one by one. If it does not help, connect the Internet cable directly to the computer. Thus, it will be possible to understand in which area to look for a problem.

Site availability check

We try to access the site through other browsers and if everything is in order, then go to Internet settings explorer.

We go to "Tools - Browser Options". tab "Additionally". Checking for checkboxes in points SSL 2.0, SSL 3.0, TLS 1.1, TLS 1.2, TLS 1.0. If not, mark and reload the browser.

Reset all settings

If the problem persists, go back to "Control Panel - Internet Options" and do "Reset" all settings.

Checking your computer for viruses

Very often, various viruses can block access to sites. Do a full check installed antivirus. I have NOD 32, so I'm showing on it.

For reliability, you can involve additional utilities such as AVZ or AdwCleaner.

By the way, the antivirus itself can block the desired site if it sees a security threat in it. Usually, when you try to open such a site, a blocking message is displayed on the screen. If this was the problem, then the antivirus can be disabled, but only if you are sure that the resource is safe. Maybe blocking for nothing.

If none of the methods helped, then the computer files were damaged. You can try to roll back the system to the last saved state (if there was such a save) or reinstall the operating system. When I encountered a similar problem, the option to reset the settings helped me.

When you enter the Circuit-Extern, the message "Internet Explorer cannot display this web page" appears.

To fix the error, you must:

After completing each step, you should repeat attempts to log in to the system.

1. Check if there is Internet access. If you do not have an Internet connection, you should contact your system administrator or ISP.

2. Check the address used to log in to the system (see DNS and IP addresses of the Kontur-Extern servers and system services).

3. Run diagnostics and fix the problems found. For this you should:

  • Go to the diagnostic portal at https://help.kontur.ru.
  • Push button Start diagnostics.
  • After completing the diagnostics, select Take Recommended Actions. The Select Issues to Fix window opens. It is recommended to check the box Choose all.
  • Click on the button Start fix.
  • Wait for the process to finish, restart the browser and check if the problem is fixed.

4. Check encryption strength.

To do this, open the menu in the Internet Explorer window reference / About the program. Paragraph Cipher Strength must have a value other than zero. If the cipher strength is zero, then you need to reinstall CryptoPro (see How to reinstall the CryptoPro program?).

5. Check if port 443 (https protocol) is open - a secure channel through which communication with the system server is carried out. This can be done in two ways:

  • Follow the link https://gmail.com . If the message "The page cannot be displayed" appears, then the port is closed.
  • Select menu Start / Run, in the line type telnet<адрес сервера> 443 (it is necessary to specify the address of the server on which the user is registered, see Addresses of the servers of the Kontur-Extern system). If a console window opens (an empty black window), then the port is open. Otherwise, an error or access denied message will appear.

Telnet in Windows Vista/7 is disabled by default. To enable it, you need to go to Start / Control Panel / Programs and Features / Turn Windows features on or off. In the window that opens, check the Telnet Client line.

If the port is closed, you must contact your system administrator.

6. Disable your antivirus software and try logging in.

7. If Internet access is via a proxy server, then you should check if the proxy has access to the DNS and IP addresses of the Kontur-Extern servers. To do this, contact your system administrator.

If none of the instructions helped, then you should contact technical support at [email protected] The letter must indicate:

1. Diagnostic number.

  • To do this, go to the diagnostic portal at https://help.kontur.ru.
  • Push button Start diagnostics.
  • After completing the diagnostics, select the button Get diagnostic number\Get number, remember the assigned case number.

2. The file with the results of the connection test.

  • To do this, open the address https://help.kontur.ru/check, a connection check will begin.
  • Wait for the end of the process and press the button Copy to clipboard.
  • Paste the copied information into text editor(for example, notepad, Word, etc.), attach it to the letter.

Explorer, which is what they were when Internet Explorer was first installed on your computer. This can be useful for troubleshooting problems that may be caused by settings changed after installation. Please note that when reinstalling the Internet Explorer is not reversible and all previous settings are lost after a reset.
Fix 2: Internet Explorer Run Mode in "No Add-Ons"
Internet Explorer add-ons such as elements ActiveX controls and browser toolbars are used by some websites to provide enhanced browsing experience. The error can occur if the add-on is corrupted or if the add-on conflicts with Internet Explorer. To determine if the error is caused by an add-on, run Internet Explorer in "no add-ons" mode.
You can open Internet Explorer without add-ons using the next step.

  • Click the Start button.
  • Select All Programs
  • -Standard
  • Under System Tools
  • Select Internet Explorer (no add-ons).
Fix 3. Scan to Availability malware
Malware and viruses can often cause Internet Explorer to slow down or stop working.
If you are able to access the Internet, go to the Microsoft website to download the Microsoft Safety Scanner, which you can use to scan your computer for viruses and malware.

Fix 4: Install the latest updates

Running Windows Update can often fix problems by replacing outside obsolete files, driver updates, and fixing vulnerabilities.
  1. Open Internet Explorer by clicking the Start button. Type Internet Explorer in the search box, and then select Internet Explorer from the list of results.
  2. Perform one of the following actions:
    • For Internet Explorer 9, click the Start button, type Update in the search box, and then select Center from the list of results windows updates. In the left pane, click the Check for Updates button.
    • In Internet Explorer 8, in Internet Explorer, click Security, and then click Windows Update.
    • For Internet Explorer 7, in Internet Explorer, click the Tools button, and then click Windows Update.
  3. Follow the instructions on the Windows Update page.
Fix 5: Turn Off GPU Rendering
  1. open Internet Explorer
  2. Click Tools > Internet Options
  3. Go to the tab Additionally, and then go to Accelerated Graphics section.
  4. Click to select Use software rendering instead of rendering GPU checkbox.
  5. Click the button Apply, and then click the button OK.
  6. Close all open Internet Explorer windows, and then restart Internet Explorer.
  7. Viewing a web page in Internet Explorer.
I hope this helps fix this issue.

Sincerely,
Lokesh

This message is faced by many Internet users. But not everyone understands why this is happening, and unsuccessfully try to find an answer. Let's take a look and find out why.

When you see the message "The page cannot be displayed" in your browser window, there is no need to be scared and panic - there is nothing to worry about. Most likely, the fact is that your Internet connection has disappeared and you just need to restore it. There are also a number of other reasons for this message to appear.

One of these reasons may be erroneous deletion or modification of operating system system files, such as Winsock.dll, Wsock32.dll and Wsock.vxd, or one of these files is located in the wrong folder. The second important reason may be erroneous or as a result of actions The malware corrupted the WinSock2 registry key. Antivirus programs and firewalls may also be the cause of this message. A third factor could be a proxy server or firewall that is not working or configured correctly operating system. Often the reason for the appearance of a window with the words “Unable to display the page” is viruses that block your Internet connection. Another reason may be an incorrect entry in the Hosts system file, or your browser settings have gone wrong, for example, there is a check mark on the item “Work offline” . It is also possible that the site or resource that you tried to access to receive this message is currently unavailable or disabled. Try visiting a different site. You may have entered the wrong address for the site or resource you are trying to access. If all of the above reasons are absent, then the problem is most likely with your ISP or communication line. Call your ISP and check if repairs or maintenance work is underway.

ads

The error message is quite met si This Pottier occurs when we want to access certain web pages ( login. .com For example):

Secure connection failed

An error occurred during the login connection. . Com (example).

Cannot Connect Securely Because SSL protocol was disabled.

(Error code: ssl_error_ssl_disabled)

If this is an HTTPS (secure) address, select Internet Options from the Tools menu, click Advanced, and make sure SSL and TLS protocols included in the security section.

After the checkboxes for SSL and TLS click on Apply and OK, and then restart Internet Explorer.

If none of given reasons and the resolution did not help, leave a comment and I will try to find a solution to the problems.

Tutorial answered:

Hey! I have a problem with mail. :) I can not open. It gives me an error when I try to go further. (Ssl_error_ssl_disabled) What should I do? I tried to upload an SSL certificate and I couldn't. Gave me the same error. And don't give $125 or $250 to them. D I don't know what to do. Can you help me?

Libya claims that money has nothing to do with solving this problem. SSL certificates are mandatory for private servers And they can only be useful servers of domain/web firm/company administrators. Price for SSL certificate / Internet area can vary from 10 $ / year (for PositiveSSL) and 1.300 $ (for Secure Pro from EV website).

ads ,

Suddenly common problem, for people who are not yet our regular readers, the error is Can't display this page and page opening http://jdl.sun.com, when trying to open the address of the IS ESF portal - https://esf.gov.kz:8443/esf-web/login

This is one of the simplest and most easily solved problems with the E-Invoicing Portal.

Solution options:

Solution: ESF does not open in the Mozilla Firefox browser

To do this, click on the icon Service at the top right of the Internet Explorer window, from the menu that appears, select Compatibility View Options.

Add website address esf.gov.kz to the list by pressing the button Add.

Insert the full address of the ESF IS portal into the address bar: https://esf.gov.kz:8443/esf-web/login

The portal login page will display correctly without navigating to the Java page.

IS ESF: Fixing This page cannot be displayed

If you are interested complete instruction to set up Internet Explorer for the Electronic Invoicing portal, go to - .

ATTENTION:

Your computer must have 32 bit installed. Java version(otherwise you will still get this error)

From the author:

If the problem is solved, one of the ways to say "Thank you" to the author is indicated -.

If the problem could not be resolved or additional questions appeared, you can ask them on ours, in our group