It is no secret that every manufacturer of monochrome laser printers receives the lion's share of their income not from the sale of the devices (printers) themselves, but from the sale Supplies to them - cartridges. After all, the device is bought once, but it usually works for a rather long time. And there is not a single manufacturer who would, directly or indirectly, claim that its cartridges can and should be refilled. Also, there is not a single printer buyer who would not try to save on printing by `` refilling '' an already exhausted cartridge. And each side in this war of interests comes up with and uses more and more sophisticated and sophisticated methods. In particular, manufacturers of so-called `` home-grade '' printers use chemical toner in their cartridges or program devices in such a way that when finished one cartridge requires installation exactly another cartridge. Indicator in in this case either serial number cartridge, `` wired '' into a special chip, or the number of printed pages, which is counted by the `` brain '' of the printer. In both cases, the device is locked until a new cartridge with a new chip is inserted into it, which unlocks it.
In turn, the user of the device, trying to refill the cartridge himself or with the help of refueling companies, must clearly understand that this procedure automatically removes his device from warranty (if found by the service center). It is also necessary to understand that when using a `` refilled '' cartridge, one way or another, you will have to put up with any inconveniences that constantly arise in the process of using it. This usually comes down to either lighter (less saturated) printing, fewer printed copies, the cost associated with replacing consumable parts in the cartridge itself.
Commonly Asked Questions About Chemical Toner:
How can conventional toner work well in machines originally designed for chemical toner?
It does not matter whether the toner is produced chemically or mechanically, it must have certain functional characteristics. These are electrification, surface morphology, dry powder fluidity, temperature properties, particle size.
These properties must correspond to what is laid down in the development of xerography of a copier or printer. As a result, only if all the functional characteristics are close to those of the original toner, the conventional toner will be able to work properly in machines designed to use chemical toner.
Suppliers should be concerned with the basic properties of the toner. Sellers and end users should be interested in the characteristics of the toner: line quality, image density, fusing, consumption, etc. And nobody cares how this toner is made.
Are there any negative consequences of using conventional toner in machines designed for chemical toner?
The short answer is no. The machine does not discriminate by which method the toner was manufactured, it just needs to have the same xerographic characteristics and behave as required for the machine to operate.
When do you need to refill a laser printer cartridge?
Return the cartridge for refueling - when the printer displays " low level toner, remove the cartridge and shake it slightly. Refilling the cartridge should only be done if the print quality does not improve after shaking it slightly. toner, for some reason is not tracked by the printer, you need to focus on light gaps in the print, first partial, then more frequent.
Refilling a laser cartridge includes the following steps:
- Diagnostics of the cartridge
- Disassembling the cartridge
- Removing Waste Toner
- Refill with quality toner
- Assembling the cartridge
When is cartridge remanufacturing required?
When there are printing defects, in the form of stripes and dots of various nature and direction, gaps, etc. Before carrying this cartridge to refueling - be sure to attach a sheet with visible print defects to the cartridge! Laser cartridge recovery - includes the following steps:
- Diagnostics of the cartridge
- Disassembling the cartridge
- Removing Waste Toner
- Replacing the drum unit and / or other worn or damaged cartridge parts
- Removal of residual electrostatic charge
- Refill with quality toner
- Assembling the cartridge
Place the cartridge in a black plastic bag or suitable box. Do not expose the cartridge to direct sunlight or room light. Do not open the drum shutters. Do not touch the surface of the drum. Do not rotate the drum. Do not try to open the cartridge. Do not incinerate cartridges. Do not leave in cars for extended periods as the temperature can be harmful. Store cartridges at temperature (0-35 degrees C). Store new or remanufactured cartridges for future shipping.
Toner is not chemically hazardous, however, if your hands or clothing gets dirty with toner, wash your hands with warm water and soap. For clothing, simply shake off the toner outdoors. Do not wash clothes in hot water, as toner may develop into a permanent dark stain. Use only cold water.
There are standard situations by which you can easily determine what needs to be done - restoration or refueling:
- A light streak across the entire sheet is a sign that toner is running out;
- Horizontal black stripes in different places of the sheet, most often along the edges - a sign of drum wear - restoration must be done;
- Dark streaks across the sheet of paper - the drum is lit, the cartridge may have been stored without the black bag - the cartridges need to be refurbished
- Gray background all over the sheet, "scraps" of toner - perhaps the squeegee (cleaning blade) is damaged - it is necessary to restore the cartridges;
- Thin white stripes along the entire sheet - the magnetic roller is damaged (clogged) - it is necessary to restore the cartridges;
- A print defect repeating in 3–4 places along the length of the sheet, while the rest of the print is normal - mechanical damage to the drum (dropped, tried to insert it into the printer incorrectly, shoved a sheet with a paper clip) - you need to do a restoration.
Also, do not forget about the paper that is used for printing! After all, the paper, while passing through the print path in the printer, makes direct contact with many moving parts. Its quality directly determines how long and how long you will print! Before direct use, paper should be stored in an open ream in a room with normal `` working '' temperature and humidity. Do not use overtly cheap paper - as a rule, it is made from waste of the cardboard and pulp industry with a high content of paper dust up to cuttings. Chlorine is used to make low-grade paper whiteness, which, as you know, will not bring anything good to the rubber parts of the cartridge. Among other things, such paper will leave dust scraps not only in the cartridge (which will be cleaned when refilled by a bona fide refueller), but also in the printer itself, on its rubber rollers for feeding and transporting paper, as well as in the oven, which heats up during operation and turns this garbage into an unusable and difficult to wash off mass.
An analogy in this case can be drawn with a car - refueling any car with low-quality oils and gasoline will inevitably lead to its breakdowns and expensive repairs.
The marketing policy of manufacturers of printing devices is aimed at extracting the main profit from consumables - cartridges and ink. The volume of the cartridges is small, the maximum is 12 ml. Therefore, having purchased an inexpensive inkjet printer, the user, after a short period of time, is forced to buy a cartridge. And the prices for consumables for inkjet printers cause the buyer either bewilderment or shock.
With the proliferation of inkjet technology, refueling, rather than the sale of cartridges, turned out to be more in demand, Novosibirsk offers many service centers to provide a similar service.
Rice. 1. Vacuum station for refilling inkjet cartridges
Ink for refilling cartridges
Refillable consumables, after the end of the ink, should be refilled as soon as possible. Leaving them empty for a long period of time means losing them. This is especially true for HP cartridges equipped with a print head, the nozzles will be clogged with curled ink.
Any ink has properties to dry out. If Epson cartridges can still survive the long absence of the coloring composition, then consumables with various kinds of fillers will dry out and will be irretrievably lost. If you want to refuel in the workshop, you need to have a second set and do not forget to control the ink consumption. These cartridges can be delivered by wrapping them in an airtight material.
Coloring compositions are selected not only by price, but also based on:
- on printing technology;
- on the printer model;
- on the design of the cartridge;
- on the features of color rendering and durability of prints;
- on the ability not to clog the steam generator.
|
Ink specification |
OCP (Germany) |
Sensient Technologic (Spain) |
InkTec(Korea) |
|
Clogged nozzles |
|||
|
Color rendering |
|||
|
Persistence of a print |
|||
Incorrectly selected ink can also be the culprit for print head failure or complete cartridge failure. If the previous ink composition is incompatible with the newly filled ink, the ink may curl up and clog the SG nozzles and the cartridge filler. Pay attention to the instructions on the label of the ink cans, the manufacturer who respects himself and the buyer always gives complete information.
Rice. 2. Water soluble ink
Nuances of refilling inkjet cartridges
The main difference between inkjet consumables is the presence or absence of a print head in the design of the device. The printhead cartridges are filled with foam, felt or other similar material to maintain pressure on the SG nozzles. Consumables that are not equipped with a self-printing device can be filled with fillers, like Canon cartridges or without, like Epson.
For refillable cartridges that cannot tolerate a long lack of ink, service centers offer to buy a refueling set. Such a kit will be a good help for users when urgently refueling a consumable.
Refilling HP cartridges
The consumables are equipped with a print head and are filled with absorbent material.
- The filling hole is determined, all the rest are sealed with tape. On some models, you must first remove the cover.
- Ink is pumped into the filling outlet with a syringe. HP Black Ink Cartridges may have airbags instead of filler. In this case, it is recommended not to insert the needle into the hole, but to pour the ink from the top in small portions.
- After the end of refueling, the mouth is carefully closed with a special stopper or sealed. Failure to pay attention to this procedure could result in an ink-filled printer.
- Plugs are removed from the air holes. The cover is returned to its place.
- Equalization of pressure in the cartridge compartments is carried out. There are models where air is pumped out with a special suction cup, and there are cartridges in which air is pumped through a technological hole. The procedure is carried out before the appearance of ink on the PG nozzles.
- The device is cleared of leaked ink and installed in the printer.
Refilling Epson cartridges
Epson consumables have the simplest design, a small container with ink. The procedure for refilling them is very simple, but there is a peculiarity - you cannot take out the cartridges for more than one minute. Therefore, it is better to keep one more set in stock, which can be refilled shortly before the ink in the main set of cartridges is empty.
- The outgoing mouth (connected to the printhead fitting) is covered with a foil.
- A needle is inserted into the filling hole to the bottom of the container. Fill with ink slowly to avoid air bubbles.
- The outlet used for refueling is closed. The cartridge is ready to be installed.
Refilling Canon cartridges
Despite the spongy filler, the cartridges of this company are easy to refill. Replacement of the consumable can be done with or without a printhead.
There are two filling options depending on the cartridge design.
In the first variant, after sealing the outlet, it is necessary to cut off the cartridge lid. Refueling points are usually marked, in color cartridges - each with its own color. The needle is inserted to the middle of the container and ink is pumped in. The lid is fixed in place with improvised means.
The second option - allows you to pump ink through the ventilation opening located on the side of the cartridge. You cannot close it after refueling.
Do not forget that coloring compositions are called so for a reason and the consequences of inaccurate refueling can remind of themselves for a long time. At home, such procedures should be carried out in a specially prepared place equipped with a plastic tray or oilcloth material. By using refueling kits and hand protection, you can protect yourself and your environment.
Choosing a cartridge for your printer. The main characteristics of cartridges, their resource and design. Refillable cartridges. Laser print cartridges. CISS.
A printer cartridge is both a consumable and the most important component of any printing device.
For example, Hewlett Packard and Lexmark inkjet printers work with cartridges in the design of which the print head is a single unit with the "body" of the cartridge itself, so after the ink is completely used up, the entire cartridge must be replaced, and the cost of replacing it is commensurate with half the price of the printer itself. ...
In order to reduce printing costs, many manufacturers have created analogs of the original cartridges, with the possibility of refilling. In them, the print quality and color reproduction closely depends on the quality of the ink used: the more their colors coincide with the original, the better the print will be.
There is an alternative to refilling - to use a continuous ink supply system or, in short, CISS, which is important when printing in large volumes.
Cartridge resource
The cartridge box usually tells you how many pages you can print with it. Basically, this indicator is determined taking into account the 5% page coverage, which allows you to only roughly calculate the price of printing 1 print and draw up a general cost plan.
Although, in practice, a much larger area is covered with ink, at the same time, not every printer allows you to install several cartridges of different capacities, so the cartridge resource is an extensible concept and is applicable only when buying a printer.
Note that in color inkjet cartridges, inks of three colors are used, and if you constantly print prints on which one of them predominates, then the ink consumption will be uneven. To get rid of this problem, you can use cartridges with the ability to refill ink of the same color, or use CISS.
Cartridge design
It was mentioned above that the cartridge can represent one piece with the print head (mainly Lexmark and HP), or made separately from it (for example, in Epson and Canon).
In the first version, the price of the cartridge is high, but if the printer has been idle for a long time and the ink has dried in it, then there is an opportunity to replace it yourself, which will save money and time.
In the second case, if a print head breaks down, which is not built into the cartridge, then the price of its replacement is equal to the price of a new printer, therefore, it is much more profitable to purchase a new printer with already filled ink tanks.
Refillable cartridge models
Most of the cartridges are equipped with an electronic chip, where updated information on ink consumption is written, and as soon as the ink level reaches its minimum, a signal is given that the cartridge should be replaced.
If you refill the cartridge with ink, then it’s not a fact that printing will work - you need either a data reset in the chip, or a complete replacement of the cartridge (it depends on its model) - manufacturers of "consumables" try not to allow such a solution to the problem, but Russian resourcefulness and inexpensive Chinese components allow solving the problem in a not quite standard way.
There are several third-party manufacturers that offer refillable cartridges - you can refill them with ink until the parts of the cartridge itself are completely damaged, and the print quality is not greatly lost.
Such a system consists of a refill syringe and a cartridge holder, which allows refilling the cartridge at home or in the office without the help of a wizard, according to the available instructions. This saves you money, even with less frequent printing.
However, please note that the use of non-original "consumables" will void the printer warranty. Plus, cheap ink can damage your printer. There is nothing to say about a decrease in print quality and a deterioration in color rendering.
Laser Printer Cartridges
Black-and-white and color cartridges for laser printing devices are in great demand at this stage, because in this case, the print has much more high quality than during the use of inkjet devices.
The price of these devices is high, but the resource of production is also significantly higher. These cartridges usually have the ability to recharge 3-4 times, after which they need to be restored (change the drum unit) and continue printing.
Do not try to refill the laser printer cartridge yourself! After all, this is a very difficult and time-consuming job, including disassembling the cartridge. In order to perform this work with high quality, you will need a lot of experience, since inexperienced actions may result in complete damage to the cartridge and contamination of all working surfaces with toner.
The model of the laser device is the main criterion when choosing a cartridge. There is an opportunity to buy an original "consumable" or a compatible one and a cheaper option - you choose, but it should be noted that cheap toner is not always able to provide the required print density and may be hazardous to your health.
Application of CISS
To save on printing, you can install CISS, this will significantly reduce the cost of printing. This system consists of 4 containers of yellow, blue, pink and black ink, each container has a silicone tube connected to the working cartridge.
CISS, according to the principle of operation of communicating vessels, creates constant pressure inside the print head. It is clear that manufacturers of consumables speak out negatively about the use of CISS, because this leads to a decrease in the sales of consumables.
It should be noted that the use of CISS also leads to the manufacturer's refusal from its warranty obligations.
Compatible with LJ HP 2100, and Canon M.
Cartridge resource: (weight 220g) at 5% coverage 5000 copies
Photo drums from Hanp, with a resource of at least 10,000 copies.
Net weight: from 1240g to 1265g.
Gross weight: from 1580g to 1605g.
HB Print cartridge 5P, 6P. (C3903A).
Compatible with LJ HP 5P, 6P, Canon L800, L900.
Cartridge resource: (weight 180gr) at 5% filling 4000 copies.
For this cartridge
Photo drums from Hanp, with a resource of at least 8000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 890g to 900g.
Gross weight: from 1125g to 1135g.
Cartridge HB Print 5000 (C4129A).
Compatible with LJ HP 5000, Canon RGH.
Resource of a cartridge: (weight 500gr.) At 5% filling of 10,000 copies.
This cartridge uses Fuji toner.
Photo drums from Hanp, with a resource of at least 20,000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 1940g to 1950g.
Gross weight: from 2400g to 2410g.
Cartridge HB Print 5200 (C7516A).
Compatible with LJ HP 5200.
Cartridge resource: (weight 500gr.) At 5% filling 12000 copies.
This cartridge uses Fuji toner.
Photo drums from Hanp, with a resource of at least 25,000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 2100g to 2150g.
Gross weight: from 2650g to 2700g.
Length / width / height: 470mm, 180mm, 240mm.
Cartridge HB Print 4W (C3900A).
Compatible with LJ HP 4W, Canon BX.
Cartridge resource: (weight 475gr.) At 5% coverage 8100 copies.
This model uses Fuji toner.
Photo drums from Hanp, with a resource of at least 17,000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: 2050g.
Gross weight: 2410gr.
Length / width / height: 470mm, 180mm, 240mm.
Cartridge HB Print 2300 (Q2610).
Compatible with LJ HP 2300.
Resource of a cartridge: (weight 350g) at 5% filling of 6000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 1410g to 1430g.
Gross weight: from 1750g to 1770g
Cartridge HB Print 5SI (3909A).
Compatible with LJ HP 5SI.
Cartridge resource: (weight 900gr.) At 5% filling 17100 copies.
This cartridge uses Fuji toner.
Hanp imaging drums with a resource of at least 30,000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 3340g to 3380g.
Gross weight: from 3810g to 3850g.
Length / width / height: 470mm, 180mm, 240mm.
Cartridge HB Print 8100 (C4182A).
Compatible with LJ HP, Mopier 320.
Cartridge resource: (1100gr.) At 5% coverage 20,000 copies.
This cartridge uses Fuji toner.
Hanp imaging drums with a resource of at least 35,000 copies
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 3475g to 3500g.
Gross weight: from 3935g to 3960g.
Length / width / height: 470mm, 180mm, 240mm.
Cartridge HB Print 4200 (Q1338A).
Compatible with LJ HP 4200.
Cartridge resource: (weight 700gr) at 5% filling 12000 copies.
This cartridge uses Fuji toner.
Photo drums from Hanp Fuji with a print resource of at least 24,000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 2175g to 2220g.
Gross weight: from 2515g to 2560g.
Length / width / height: 350mm, 155mm, 245mm.
Cartridge HB Print 4300 (Q1339A).
Compatible with LJ HP 4300.
This cartridge uses Fuji toner.
Photo drums from Hanp Fuji, with a print resource of at least 36,000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Length / width / height: 350mm, 155mm, 245mm.
Cartridge HB Print E 16.
Compatible with Canon FC 1 **, 2 **, 3 **, 530, PC 7 **.
This cartridge uses Integral Ultrafine Toner.
AEG imaging drums with a print resource of at least 10,000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 730g to 735g.
Gross weight: from 965g to 970g.
Length / width / height: 340mm, 120mm, 195mm.
Cartridge HB Print E30.
Compatible with Canon FC 1 **, 2 **, 3 **, 530, PC 7 **.
Cartridge resource: (weight 180gr.) At 5% filling 4000 copies.
AEG imaging drums with a print capacity of at least 10,000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 760g to 765g.
Length / width / height: 340mm, 120mm, 195mm.
Cartridge HB Print 1100 (C4092A).
Compatible with LJ HP 1100, Canon LBP 810 (EP-22) and its faxes.
This cartridge uses Integral toner.
Hanp imaging drums with a print resource of at least 6,000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 720g to 725g.
Cartridge HB Print 5L, 6L, б3100. (С3906А).
Compatible with LJ HP 5L, 6L, 3100, Canon LBP 460, 660 (EP-A), L800 (FX-3).
Cartridge resource: (toner weight in the hopper 140 g.) At 5% coverage 2500 copies.
For this lineup uses Integral toner, an ultrafine toner that maximizes print quality.
Hanp imaging drums are very high quality imaging drums, with a very good and print-transmitting coating, resistant to wear and other external factors. The resource is at least 6,000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 720g to 725g.
Gross weight: from 945g to 950g.
Length / width / height: 350mm, 130mm, 155mm.
HB Print cartridge 4L, 4ML (92274A).
Compatible with LJ HP, Canon LBP 4U, 4I. (EP-P).
Cartridge resource: (weight 160 g) at 5% coverage 3000 copies.
Integral toner is used for this cartridge.
Hanp imaging drums stand for quality and reliability. The resource is at least 7000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 855g.
Gross weight: from 1090gr
Length / width / height: 340mm, 120mm, 195mm.
HB Print 1200 cartridge (C7115 A, X).
Compatible with LJ HP 1200, Canon LBP1010 (EP-25, T) and its faxes.
Cartridge resource: (weight 150 g, 180 g.) At 5% filling 2500 copies, if it is C7115A, and 3500 copies, if it is C7115X. Hanp imaging drums whose quality is beyond doubt. Their resource is at least 8000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: if it is: A from 730g to 735g, if it is X from 750g to 785g.
Gross weight: if it is: A from 965g to 970g, if it is X from 985g to 1025g.
Length / width / height: 340mm, 120mm, 195mm.
Cartridge HB Print 1300 (Q2613 A, X).
Compatible with LJ HP 1300 and Canon equivalents.
Cartridge resource: (weight 150,170g.) At 5% coverage 2500 copies, if it is Q2613A, and 4000 copies, if it is Q2613X. Hanp imaging drums with a resource of at least 8000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Length / width / height: 340mm, 120mm, 195mm.
Cartridge HB Print 1150 (Q2624A, X).
Compatible with LJ HP 1150.
Cartridge resource: (weight 150g, 170g.) At 5% coverage 2500 copies, if it is Q2624A, and 3500 copies, if it is Q2624X. For this lineup, Fuji Ultrafine toner is used to perfectly match this line of cartridges. Fuji photo drums with a resource of at least 8000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: if it is: A from 730g to 735g, if it is X from 750g to 765g.
Gross weight: if it is: A from 965g to 970g, if it is X from 985g to 1000g.
Length / width / height: 340mm, 120mm, 195mm.
HB Print cartridge 4050 (С4127А, X).
Compatible with LJ HP4000, 4050, and Canon FX-6.
Cartridge resource: (320 g, 500 g) at 5% filling 6000 copies, if it is C4127A, and 10,000 copies, if it is C4127X.
This cartridge uses Fuji toner.
Hanp imaging drums with a resource of at least 20,000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: if it is A from 1565gr. up to 1590gr, X from 1745gr to 1770gr.
Gross weight: if it is A from 1905gr. up to 1915gr, X from 2070gr to 2095gr.
Length / width / height: 350mm, 155mm, 245mm.
Cartridge HB Print 4100 (C8061A, X).
Compatible with LJ HP 4100.
Cartridge resource: (weight 320g. 500g.) At 5% filling 6000 copies, if it is C8061A, and 10000 copies, if it is C8061X.
This cartridge uses Fuji toner.
Hanp imaging drums with a resource of at least 20,000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: if it is: A from 1565g to 1590g, X from 1745g to 1770g.
Gross weight: if it is: A from 1905g to 1915g, X from 2070g to 2095g.
Length / width / height: 350mm, 155mm, 245mm.
Cartridge HB Print 4+, 5M. (92298A, X).
Compatible with LJ HP 4+, 5M, Canon (EP-E).
Cartridge resource: (weight 340g. 450g.) At 5% coverage 6800 copies, if it is 92298A, and 8800 copies, if it is 92298X.
This cartridge uses Fuji toner.
Hanp photo drums with a resource of at least 18,000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: if it is A 1350g, X 1460g.
Gross weight: if it is A 1675g, X 1785g.
Length / width / height: 350mm, 155mm, 245mm.
HB Print XP8ex cartridge.
Compatible with Xerox (XP8ex).
Cartridge resource: (weight 220gr.) At 5% filling 5000 copies.
For this cartridge, toner from LJ is used, it is superfine, it combines quality, practicality, reliability, guaranteeing the most efficient use of toner.
Hanp imaging drums with a print resource of at least 10,000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: 1130g.
Gross weight: 1365gr.
Length / width / height: 340mm, 120mm, 195mm.
Cartridge HB Print X 3110.
Compatible with Phazer 3110, 3210.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 750g to 760g.
Length / width / height: 340mm, 120mm, 195mm.
HB Print cartridge S 1210D1.D3
Compatible with Samsung ML 200 / 210,1010 / 1020M, 1210 / 1220M.
Resource of a cartridge: (weight 150g.) At 5% filling 2500 copies.
This cartridge uses LJ toner.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 750g to 760g.
Gross weight: from 985g to 995g.
Length / width / height: 340mm, 120mm, 195mm.
HB Print cartridge S 4500 D1.D3.
Compatible with Samsung 4500, 4600.
Resource of a cartridge: (weight 120g.) At 5% filling 2500 copies.
This cartridge uses LJ toner.
Photo drums from Hanp, with a print resource of at least 6,000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 1230g to 1235g.
Gross weight: from 995g to 1000g.
Length / width / height: 340mm, 120mm, 195mm.
HB Print cartridge S 1710D3 / see.
Compatible with Samsung ML 1710P, ML 1510, ML 1750.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 825g to 850g.
Cartridge HB Print E310.
Compatible with Lexmark Optra E310, E312.
Cartridge resource: (weight 200gr.) At 5% filling 4000 copies.
This cartridge uses LJ toner.
Photo drums from Hanp, with a print resource of at least 9000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: 1150g.
Gross weight: 1385gr.
Length / width / height: 340mm, 120mm, 195mm.
Cartridge HB Print Q 2612A
Compatible with HP 1010, 1015.
Resource of the cartridge: (weight 150g.) At 5% coverage 2000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 720g to 725g.
HB print cartridge Canon cartridge 703
Compatible with LBP 2900, 3000, HP 1010, 1015.
Resource of the cartridge: (weight 150g.) At 5% coverage 2000 copies.
For this cartridge: Fuji toner is used.
Photo drums from Hanp, with a print resource of at least 5000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 720g to 725g.
Gross weight: from 955g to 950g or 960g.
Length / width / height: 350mm, 130mm, 155mm or 340mm, 120mm, 195mm.
HB print cartridge Canon cartridge 706
Compatible with LaserBase MF6560PL, I - SENSYS MF 6540PL.
Resource of a cartridge: (weight 150g) at 5% filling of 5000 copies.
For this cartridge: Fuji toner is used.
Photo drums from Hanp, with a print resource of at least 10,000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from gr to gr.
Gross weight: from 955g to 950g or 960g.
Length / width / height: 350mm, 130mm, 155mm or 340mm, 120mm, 195mm.
Cartridge HB Print C 8543X
Compatible with HP LJ C8543X
Resource of a cartridge: () at 5% coverage of 30,000 copies.
For this cartridge: Fuji toner is used.
Photo drums from Hanp, with a print capacity of 65,000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag with “selika gel” sachets inside to eliminate excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
HB Print cartridge SCX4216D3.
Compatible with SCX 4216F.
Cartridge resource: (weight 170gr.) At 5% coverage 3000 copies.
LJ toner is used for the cartridge.
Photo drums from Hanp, with a print resource of at least 9000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 825g to 850g.
Gross weight: from 1060g to 1085g.
Length / width / height: 340mm, 120mm. 195mm.
HB Print cartridge S 1710D3 / P3120.
Compatible with Xerox 3120.
Cartridge resource: (weight 170gr.) At 5% coverage 3000 copies.
LJ toner is used for the cartridge.
Photo drums from Hanp, with a print resource of at least 9000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 825g to 850g.
Gross weight: from 1060g to 1085g.
Length / width / height: 340mm, 120mm. 195mm.
HB Print cartridge 109R00725D3.
Compatible with Xerox 3120, 3121, 3130, P8E16, P8T16E.
Cartridge resource: (weight 170gr.) At 5% coverage 3000 copies.
LJ toner is used for the cartridge.
Photo drums from Hanp, with a print resource of at least 9000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 825g to 850g.
Gross weight: from 1060g to 1085g.
Length / width / height: 340mm, 120mm. 195mm.
Cartridge HB Print 4250 (Q5942A).
Compatible with LJ HP 4250.
Cartridge resource: (weight 700gr) at 5% filling of 10,000 copies.
This cartridge uses Fuji toner.
Fuji imaging drums with a print capacity of at least 25,000 copies.
Optionally, the cartridge can be equipped with a new chip.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 2075g to 2120g.
Gross weight: from 2415g to 2460g.
Length / width / height: 350mm, 155mm, 245mm.
Cartridge HB Print 4350 (Q5942X).
Compatible with LJ HP 4350.
Cartridge resource: (weight 1100gr.) At 5% coverage 20,000 copies.
This cartridge uses Fuji toner.
Fuji imaging drums with a print capacity of at least 35,000 copies.
Optionally, the cartridge can be equipped with a new chip.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 2580g to 2600g.
Gross weight: from 2920 to 2940g.
Length / width / height: 350mm, 155mm, 245mm.
Cartridge HB Print 4345 (Q1345A).
Compatible with LJ HP 4345 mfp.
Resource of a cartridge: (weight 1000gr.) At 5% filling 18000 copies.
This cartridge uses Fuji toner.
Hanp imaging drums with a print resource of at least 36,000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 2480g to 2500g.
Gross weight: from 2820 to 2840g.
Length / width / height: 350mm, 155mm, 245mm.
Cartridge HB Print 1160 (Q5949A).
Compatible with LJ HP 1160, 1320 and Canon equivalents.
Cartridge resource: (weight 150 g) at 5% coverage 2500 copies.
Fuji toner is used.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Length / width / height: 340mm, 120mm, 195mm.
Cartridge HB Print 1320 (Q5949X).
Compatible with LJ HP 1320 and Canon equivalents.
Cartridge resource: (weight 320 g) at 5% coverage 6500 copies.
Fuji toner is used.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Length / width / height: 340mm, 120mm, 195mm.
Cartridge HB Print 2015 (Q7553A).
Cartridge resource: (weight 150 g) at 5% coverage 3000 copies.
Fuji toner is used.
Photo drums from Hanp, with a resource of at least 6,000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: A from 800g to 805g.
Gross weight: A from 1000g to 1030g.
Length / width / height: 340mm, 120mm, 195mm.
Cartridge HB Print 2015 (Q7553X).
Compatible with LJ HP 2015 and Canon equivalents.
Cartridge resource: (weight 320 g) at 5% coverage 7000 copies.
Fuji toner is used.
Photo drums from Hanp, with a resource of at least 14,000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: X from 900g. up to 905g.
Gross weight: X from 1145gr. up to 1150gr.
Length / width / height: 340mm, 120mm, 195mm.
HB Print cartridge 2420 (Q6511A).
Compatible with LJ HP 2420.
Cartridge resource: (weight 320gr.) At 5% coverage 6000 copies.
This cartridge uses Fuji ultrafine toner.
Photo drums from Hanp, with a resource of at least 13,000 copies.
Optionally, the cartridge can be equipped with a new chip.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Length / width / height: 350mm, 155mm, 240mm.
Cartridge HB Print 2430 (Q6511X).
Compatible with LJ HP 2430.
This cartridge uses Fuji toner.
Optionally, the cartridge can be equipped with a new chip.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Length / width / height: 350mm, 155mm, 245mm.
HB Print cartridge P 3005 (Q7551A).
Compatible with LJ HP P3005.
Cartridge resource: (weight 320gr.) At 5% coverage 6500 copies.
This cartridge uses Fuji ultrafine toner.
Photo drums from Hanp, with a resource of at least 13,000 copies.
Optionally, the cartridge can be equipped with a new chip.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 1380g. up to 1400g.
Gross weight: from 1720gr. Up to 1740gr
Length / width / height: 350mm, 155mm, 240mm.
HB Print cartridge P 3005 (Q7551X).
Compatible with LJ HP P 3005.
Cartridge resource: (weight 650gr) at 5% filling 12000 copies.
This cartridge uses Fuji toner.
Hanp imaging drums with a print capacity of at least 25,000 copies.
Optionally, the cartridge can be equipped with a new chip.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 2125g to 2170g.
Gross weight: from 2465gr to 2510gr.
Length / width / height: 350mm, 155mm, 245mm.
Cartridge HB Print M 5035 (Q7570A).
Compatible with LJ HP P 3005.
Cartridge resource: (weight 700gr) at 5% filling 15000 copies.
This cartridge uses Fuji toner.
Hanp imaging drums with a print capacity of at least 30,000 copies.
Optionally, the cartridge can be equipped with a new chip.
Packaging: The cartridge is packed in a waterproof, black plastic bag, contained inside "selika gel" sachets to eliminate excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 2125g to 2170g.
Gross weight: from 2650gr to 2700gr.
Length / width / height: 350mm, 155mm, 245mm.
Cartridge HB Print Universal 1210, 3110, E 210.
Resource of a cartridge: (weight 150g.) At 5% filling 2500 copies.
This cartridge uses LJ toner.
Hanp imaging drums with a print resource of at least 7000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 750g to 760g.
Gross weight: from 985g to 995g.
Length / width / height: 340mm, 120mm, 195mm.
Cartridge HB Print E 210.
Phazer E 210 compatible.
Resource of the cartridge: (weight 150g.) At 5% coverage 2000 copies.
This cartridge uses LJ toner.
Photo drums from Hanp, with a print resource of at least 7000 copies.
Packaging: The cartridge is packed in a waterproof, black plastic bag, with "selika gel" sachets inside to eliminate the build-up of excess moisture. Corrugated cardboard insert, profile “B”, which firmly locks and holds the cartridge inside the package. The box consists of a micro-corrugated cardboard profile “E”, the strength of which can withstand 16 rows of shtobeling.
Net weight: from 750g to 760g.
Gross weight: from 985g to 995g.
Length / width / height: 340mm, 120mm, 195mm.
Attention!
The difference in the number of copies issued by cartridges, for example (C7115A and C7115X), etc. etc. Depends on the volume of the hopper. With the letter A at the end of the number it means a standard bunker, and with the letter X it is an advanced one, that is, with a large volume.
The amount of toner in the hopper is shown in parentheses.
The cartridge yield is highly dependent on the content of the printed document and established quality print. The above guideline values are for reference only and may vary significantly for different models printing devices.