The vast majority of users have encountered the problem of a blue screen on the monitor, especially in the early Windows versions. Since that time, the name for this phenomenon has appeared - blue screen of death. To date, operating Windows systems 10 and 8, a blue screen (BSoD) may also appear with a warning about a problem that has arisen, which can be solved by restarting the computer.
The error code looks like this 0x00000139. Some issues that cause work to stop operating system, it can fix offline by clicking on the "Reset" button. But there are a number of problems that the operating system cannot solve on its own. Therefore, they need to be considered in more detail.
Reasons for the error
The blue screen problem can occur once a week, it occurs 10 minutes after the system starts. The screen may contain either a fault code, or its name. Periodic reporting of a malfunction can be caused by the following factors:
This is not the whole list of reasons., causing the Kernel security check failure blue screen.
Ways to get rid of the problem
To diagnose the cause of the malfunction, it is necessary to scan hard drive. Scanning is best done in safe mode as an administrator. For this you need:
If the scan showed no problem, then you need to check the system files next. Calling the command line again, you need to write the command "sfc / scannow" in it and run it. The purpose of this test is to diagnose the integrity file system. If any damage is found, the utility will start repairing them.
RAM
In Windows 10, the error can occur with problematic RAM. It mostly shows up when when multiple slats are installed. Those who work with Photoshop know how much RAM the program consumes.
If several RAM sticks are installed on the motherboard, then for a non-working one, you need to remove them all and install them one at a time. At the same time, observe if an error occurs.
For a more detailed RAM analysis you can use hardware by means of Windows. For this:
- Go to Start → Search → Memory Diagnostics.
- The Windows Memory Checker window will appear.
The RAM check can be performed immediately after system boot or scheduled to run on a forced reboot.
In addition to the standard operating system tools, there are third-party well-proven products for diagnosing problematic components.
Driver installation
Everyone is trying to update the system, and with it the drivers. But the appearance of the error code Kernel security check failure when installing outdated versions of drivers causes contradictions in the work. To install the correct version of the driver, you must:
Registry entries
The violation of the stable operation of the system is affected by changes in registry entries. Changes can be made by programs, viruses or the user himself. Even a modified date can cause error 0x00000139. To restore a healthy registry, it is recommended to do it backups. If this has not been done, you can use third-party software that works with the registry.
You can replace the BIOS version with a more current one using the programs and products of the motherboard manufacturer. The BIOS update program is called "...Update". She will select the required version and reprogram the chip.
If the above actions did not take effect, and the error appears again and again, there are only two ways out:
- Reinstall Windows.
- Take it to a specialized repair shop.
Windows 10 kernel security check failure error is a very frustrating situation for many reasons. First, a blue screen kernel security check failure can occur due to a wide variety of reasons.
Secondly, it is sometimes difficult to identify the root cause, since the trouble can manifest itself several times a day, and sometimes nothing is heard about it for two to three weeks.
Thirdly, a similar disease is typical not only for the recently released top ten, but also for the seemingly more stable eight. And, finally, fourthly, the Windows 8 (10) kernel security check failure error, if left uncorrected, can cause more serious complications related not only to the software, but also to the installed hardware.
The kernel security check failure error code can report several variants of the problem that has occurred. Here are the most basic ones:
- Outdated BIOS version.
- Conflict of exploited products in the composition of the PC.
- Outdated versions of the applied drivers.
- Serious trouble in the system registry.
With these root causes in mind, you can understand how to fix kernel security check failure Windows 10 (8).
Ways to solve the problem
So, what to do - kernel security check failure Windows 8 (10), if nothing has changed on the user's computer for a relatively long time? The first step is to check and update the BIOS version to the current one.
First of all, you should find out the manufacturer of the motherboard. This is easy enough to do, for example, thanks to the free and effective application Speccy. After that, download one of the installers, which will update quickly and automatically. For example, for Asus, this is the special software "AsusUpdate", for MSI - "MSILiveUpdate" and so on.
The next step is to check the current versions of the drivers used. You can monitor and fix for up-to-date versions using one of the programs available today, which will independently check the relevance and perform the necessary installation. Unfortunately, sometimes such software fails or installs the wrong thing.
- Go through the "Start" button in the "Computer" menu.
- Select "System" - "Device Manager".
- Then clicking on each device right click mouse, go to the settings, where you can perform the required update. It's longer, but more efficient.
If a kernel security check failure occurs when installing Windows 10, then it is quite possible that the hardware performance is simply not enough for the installation and operation of the new RAM. In this case, there are two options - to refuse the installation or to perform the necessary upgrade of the computer to the required parameters.
A similar situation may arise after the replacement or additional connection of new equipment. For example, installing a more powerful processor on an old motherboard, connecting another memory stick, connecting a webcam, printer, and so on. In this not the most pleasant situation, it is necessary, first of all, to check the compatibility of the equipment.
For example, the motherboard may simply not support the installed processor, the power supply is not enough power to run the latest video card, and so on. Therefore, it is always better to trust such a process to specialists who have relevant experience in this matter. Otherwise, there is a high probability that the blue screen is the forerunner of a serious breakdown at the hardware level, which will require at least a small investment.
The last option concerns some damage in the system registry. For this fix, we recommend that you do the following:
- Go to command line.
- Enter the "regedit" command.
- Wait for results.
- Additionally, you can use one of the specialized applications (CCleaner, Ashampoo Optimizer, and so on).
Summary: Don't worry if your computer gets the blue screen of death error due to Kernel Security Check failure issue in Windows 10/8/7. This article will provide one quick fix and 4 reliable methods to help you thoroughly fix Kernel Security Check failure with BSOD error with simple clicks.
Kernel Security Check failure with BSOD error in Windows 10/8, help!
"Hi there, do you know how to fix the Blue Screen of Death (BSOD) error after upgrading Windows system to Windows 10 or Windows 8/8/1? I "m having this issue that both two of my computers and both of these two computers had just upgradedintoWindows 10 and Windows 8 yesterday.
This morning, when I tried to start these two computers and then theBIOSerror came up with the error message "Your PC ran into a problem and needs to restart. We"re just collecting some error info, and then we"ll restart for you. (10% complete) If you"d like to know more , you can search online later for this error: KERNEL_SECURITY_CHECK_ERROR". I then tried to Google the answer and it seemed that quite a lot of users are having a similar issue to me. So how can I fix this issue and get my computers out of the Kernel Security Check failure with BSOD error?"
If you happen to have a BSOD problem in your PC due to Windows system install or update but failed with Kernel Security Check error, don't worry. Right below, EaseUS software has collected some reliable solutions including one quick fix and 4 methods to help you effectively get rid of Kernel Security Check issue from Windows 10/8/7 PC.
Quick fix Kernel Security Check failure with BSOD error
Here are the steps about how to boot Windows 10/8 PC into Safe Mode:
1. Press Win + R keys to open Run dialog > Type: msconfig and hit Enter.
2. Go to Boot option > Select Safe boot > OK.
If you want to boot into Safe Mode with the internet connection, select Network option under Safe boot category.
3. Click Restart so to boot your computer into Safe Mode now.
If the Kernel Security Check failure disappears after booting PC into Safe Mode, you need to check the offending programs in your PC or uninstall and update necessary drivers.
If the error still exists in Safe Mode, it's very likely that the RAW or hard drive got something wrong.
Note: 1. If Safe Mode doesn't help, you can directly boot PC into desktop and follow the offered solutions to fix Kernel BSOD error.
2. If you can "t boot PC into the desktop, try hard reboot:
- Press and hold the power button on your PC till it powers off > Restart PC by pressing the power button.
- Repeat the steps till you see Please wait comes out.
- Click See advanced repair options > Troubleshoot > Advanced options.
- Choose Startup Settings > Restart > Press F4, F5, F6 to try 4, 5, 6 options so to boot your PC into desktop.
Resolutions to fix KERNEL_SECURITY_CHECK error in Windows 10/8/7
Here in this part, you"ve three reliable methods to effectively fix and get rid of KERNEL_SECURITY_CHECK failure error in Windows 10/8/7 and you may selectively follow either one to get this issue fixed now:
Before you start, it's highly recommended for you to do a full scan on your computer to remove possible virus or malware with anti-virus software.
Method 1. Repair System file and bad sectors that cause Kernel Security Check failure issue
Run System File Checker:
1. Type: cmd in the search box and right-click on Command Prompt > Select Run as administrator;
2. Click Yes to continue with administrator permission;
3. Type: sfc /scannow and hit Enter to check and repair corrupted system files which may cause BSOD error with Kernel Security Check failure;
run partition manager:
If system hard drive or partition has bad sectors, Windows system won't be able to boot normally. Instead, a BSOD error may come up.
Fortunately, powerful partition manager software from EaseUS will effectively help fix this issue with its Check Partition feature:
Step 1: Open EaseUS Partition Master on your computer. Then locate the disk, right-click the partition you want to check, and choose "Check File System".
Step 2: In the Check File System window, keep the "Try to fix errors if found" option selected and click "Start".
Step 3: The software will begin checking your partition file system on your disk. When it has completed, click "Finish".
Method 2. Scan and fix system hard disk error
1. Click Start > File Explorer > This PC;
2. Right-click the hard drive that you need to check and scan > Select Properties;
3. Go to Tools tab > Click Check;
There, the Error Checking tool will automatically check and fix system hard disk error that may cause a Kernel Security Check failure issue in Windows PC.
Method 3. Run Memory Diagnostic Tool to fix the Kernel Security Check failure issue
1. Press Win + R keys to open Run dialog > Type: mdsched.exe and hit Enter;
2. Choose Restart now and check for problems (recommended) to check the status of memory card right now;
Or select Check for problems the next time I start my computer;
3. Then The Memory Diagnostic Tool will automatically run to check errors on Memory card in your PC.
If no errors are checked, your memory card is working perfectly fine with no problem;
If errors are detected, change the current memory card with a new one so to get rid of BSOD with Kernel Security Check failure error.
Method 4. Try System Restore to repair PC from Kernel BSOD issue
1. Boot PC into Safe Mode; (You may follow guidelines in Quick Fix so to boot PC into the Safe Mode.)
2. Click Control Panel on Start > Choose Recovery in All Control Panel Items;
3. Click Open System Restore > Check Choose a different restore point > Next;
4. Select the exact restore point (healthy Windows restore point) which you"ve created previously and click Next > Next to continue;
5. Click Yes to confirm that you want to execute the System Restore operation.
Wait to let the System Restore process complete and then you"ll get your previous Windows system back. There, no Kernel Security Check error or BSOD issue will exist then.
Related Articles - ALSO ON EaseUS SOFTWARE
The Windows 10 kernel security check failure error is a very tricky nuisance for several reasons. First of all, this problem can be provoked as software, as a conflict situation with any equipment. Secondly, the blue screen of the kernel security check failure is tricky - it can remind you of its existence several times a day, and then lull the user's vigilance, taking a break for a couple of days.
However, there is a kernel security check failure Windows error, even if it temporarily does not show itself, which means that this nuisance quietly and imperceptibly continues its destructive activity.
However, we are also not made with a finger, so we are happy to inform you about what the kernel security check failure error code can mean:
- Congratulations - your computer's BIOS is out of date
- Something installed in the PC really does not want to work in the general system of equipment, in short, it rages and provokes a conflict.
- Drivers are out of date.
- The system registry is experiencing serious problems with its health.
Fu .. figured out the most difficult. The last and very simple step remains - to understand how to fix the kernel security check failure in Windows 10.
Recipe treatment
What to do - kernel security check failure Windows 8? What to do, what to do .. fix!
And we will begin the procedure for treating the Windows 10 kernel security check failure error from the BIOS. To do this is quite simple:
- Learn very important information about who made motherboard which is used on your PC? This can be done using the computer documentation or using the special Speccy program, which can be downloaded from the Internet on the ball.
- Next - download and install the original software, which will update the BIOS automatically. For example, for an ASUS motherboard it will be “AsusUpdate”, and for MSI it will be “MSILiveUpdate”, and so on in the same vein.
Did not help? Well, figs with him - we still have ways to deal with this nuisance, known as the kernel security check failure blue screen! It would be quite logical to move on to checking the current driver versions. So let's do it. In this situation, it is recommended to do everything with your own hands, and do not rely on programs that sometimes fail. Therefore, we put a pillow under the fifth point and proceed:
- Through the "Start" go to the "task manager" (Computer - system -..).
- Right-click on each device in turn, go to settings and try to update the drivers. I understand it's a long time. I understand it's boring. But you have to!
By the way, when installing Windows 10 - “kernel security check failure” is quite a common occurrence. The thing is that the latest operating system from Microsoft is quite demanding on PC resources, so some models may simply not pull it. There may not be enough memory, for example. What to do? Yes, forget about such an installation, since the seven and eight have not yet lost their relevance. But if you really need it - go to the store to upgrade your PC!
Let's move on to fixing the system registry, as it may well be the root cause of this unpleasant situation. What we do:
- Open a command prompt and type "regedit".
- We are patiently waiting for the result.
- We make a control shot with one of the useful programs, such as CCleaner or Ashampoo Optimizer.
The last option for a kernel security check failure Windows error is that something went wrong when installing new hardware. If this is an external device (for example, a printer, a camera, and so on), then it is easier to disable it and perform computer health diagnostics. Actually, absolutely any installation can cause this trouble:
- The power supply can't handle the performance of the new graphics card.
- The processor is not designed for the motherboard you are using.
- The memory bar does not meet the required parameters.
That is, first of all, it is necessary to study all the technical documentation before starting to perform an independent upgrade. It is better to entrust such work to specialists. Actually, this is all that is known today about the kernel security check failure error code.
There are situations when, when working with Windows, a blue screen (BSoD) appears with a Kernel Security Check Failure error. If the situation repeats itself constantly, this may be a symptom of serious errors on the hard drive or in RAM. Let's see how to fix it.
Depending on the cause of the malfunction and the version of the operating system, the mentioned blue screen may contain the full name of the error or only the code 0x00000139. The computer usually freezes after 5-30 minutes from the moment it is turned on.
Sometimes, through a blue screen error, you can’t boot your laptop or computer at all, then try to start it in safe mode. To do this, when turning on, press the corresponding F or Esc key (depending on the manufacturer). If safe mode does not work properly, start the system with boot disk or flash drives.
Reinstalling Windows is generally not required, but may be required.
Step One: Scan
The first thing to do to diagnose the problem is to scan HDD using the built-in Chkdsk utility. To do this, open the Start menu and in the system search field type the command:
chkdsk /f C:
The next time you turn on your computer, before Windows boots, it will scan system partition C. Keep in mind that verification can take a long time.
Step Two: System File Checker
Blue screen error 0x00000139 often occurs when the system files. To check, right-click on the Start button and select "Command Prompt (Admin)".
In the window command line type:
sfc /scannow
Step Three: Checking the RAM
At this stage, you should check RAM. For this in search string Start menu, type "Memory Diagnostics". Diagnostics can be run immediately (after reboot) or scheduled the next time you turn on your computer. 
After that, be sure to run a full antivirus scan.
Step Four: Update Drivers
If the above steps did not bring desired results, you need to do the following. This procedure may seem time consuming, but in most cases solves the problem. We are talking about updating the drivers of all components.
Go to Device Manager. Right-click on each component individually and select Update Driver. You may need disks with drivers for PC components, and in some cases you will have to look for them on official pages manufacturers. 
If these measures prove ineffective and the blue screen with 0x00000139 continues to appear, all that remains is to reinstall Windows. In this case, it is better not to use the recovery function, but to immediately format system disk C and do a clean installation of the operating system.