The heat calculator DIO-99M, created on a modern element base, is capable of a lot, despite its very low cost. Accounting for up to 5 flow channels and 4 temperature channels in various configurations allows you to approach the issue of accounting for thermal energy, cold water and hot water consumption with maximum efficiency, while keeping within the most stringent cost of the metering unit.
Since 2002, the apartment heat meter DIO-99(IN) mod.1.2 has been produced, designed for individual heat energy metering. The device proved to be very reliable, unpretentious in installation and maintenance. It has positive feedback from people who have installed DIO-99 heat meters in their homes and apartments. From the western borders of Russia, Kaliningrad, to the borders with Japan and China, from the South and Center of Russia to the Arctic and Chukotka, wherever our devices are located, heat consumers, that is, residents of our country, pay only for real utility services. And this is millions of saved rubles from family budgets!
Heat meter dio_99 - how and with what to take readings? To take readings from the heat meter dio 99, you will need a PN-1 cumulative remote control or a modem, a computer or laptop with the DIO_Archiver program installed. You can download a free program for taking readings from the heat meter dio 99 at the end of the article.
A little more about the heat meter dio 9 - the correct name is DIO-99TSP. Produced by ELNT NEMTECH LLC, Moscow. The purpose of this heat meter is commercial metering of thermal energy, hot water, cold water.
DIO-99M 5.4 heat meters operate on autonomous power supply (battery), or from a 12V power supply. Has the ability to work, take readings, via GSM modem, as well as taking readings directly to a laptop via the RS-232 port, for this you need an RS-232 cable to DIO-99M 5.4, the factory price is 460 rubles and the DIO_Archiver program is supplied free of charge.
It’s hard to find a laptop with an RS-232 port now, so to take readings from the DIO-99M, you can use the original USB to RS-232 adapter, but not Chinese, with a chip built right into the cable connector. Recognizing a good adapter is easy, it has a small box in the cable break and a driver disk is a must. With an unsuitable adapter, the program will not see the heat meter.
Also, the program may not work on Windows 10.
Accumulative panel PN-1 for taking readings from the heat meter dio_99.
Accumulative panel PN-1 is required for transferring and storing information from the heat meter DIO-99M 5.4. The data in it is recorded on a micro sd memory card, the price of the accumulative remote control PN-1 when purchased at the factory is 2420 rubles.
The PN-1 is powered by two ordinary AA batteries, the remote control is connected to the computer via the USB interface (mini-USB connector). The cable is included with the device.
Taking readings from the heat meter DIO-99M 5.4.
Prepare the PN-1 remote control for work, for this:
1. Insert a micro sd memory card into the remote control slot.
2. Install batteries.
3. Press and hold the Start button until you hear a beep. After that, a message should appear on the screen "PN-1 version 1.0" and "Error: device not found". Error because the remote control is not really connected to the polled device.
Further connect the PN-1 remote control to the DIO-99 heat meter, press and hold the "START" button until a beep sounds, the indicator should display the inscription “Reading data hour. archive" and informational loading bar.
Wait for the download to complete, you will be informed about this by a sound signal, and the inscription "Data read successfully", after which the screen will turn off. Disconnect the remote control from the DIO-99M heat meter.
The number of readings from the DIO-99 heat meter, which you can simultaneously take and store on the cumulative remote control, is practically unlimited - it is determined by the size of the micro sd memory card, but still we recommend that you clear the memory once every six months if there is a large amount of data, so with data is easier to work with.
Now your task is to transfer the readings to a computer or laptop, for which it is supplied free of charge in a ZIP archive.
Unzip the file to any convenient place, preferably in the "Program Files" or "My Documents" folder and run the DIO_Archiver.exe file, a pretty binocular icon. The program works without installation. The program shortcut is best placed on the desktop.
Viewing and printing of readings from the heat meter DIO-99
To transfer readings from the DIO-99 heat meter, connect the cumulative remote control to the computer using the “mini usb” cable from the kit and run the DIO_Archiver program.
The interface of the DIO_Archiver program in Russian is simple and clear, it will allow you to store data on a computer and print them out to submit a report to the power supply organization.
As you can see take readings from the heat meter dio 99 not difficult, even a beginner can do it, the main thing is not to be afraid and harm the heat meter, contrary to the opinion of "experts", you will never be able to.
Visual viewing of readings directly on the DIO-99M heat meter is also much easier than on other heat meters, since the heat meter's menu is single-level, access to almost all reporting parameters is possible immediately after pressing the required button.
Paramonov Yu.O. Rostov-on-Don. 2014-17 Energostrom LLC
B1 Free Archiver is a powerful, simple and user-friendly tool that targets different operating systems (Windows, Linux, Mac) and supports more than 40 formats (b1, zip, rar, rar5, 7z, jar, xpi, arj, bz2, bzip2, tbz2, tbz, txz, cab, chm, chi, chq, chw, hxs, hxi, hxr, hxq, hxw, lit, cpio, deb, gz, gzip, tgz, tpz, hfs, iso, lzh, lha, lzma, rpm, tar, xar, z, taz, xz, dmg, cb7, cbr, cbt, cbz). The main advantage of the program is its stable support for large archive sizes, which is far from the last place in today's realities (disc volumes).
Interface Archiver B1 Free Archiver localized into Russian and intuitive. Even the most novice user can handle it. In addition, the program integrates with Windows Explorer, allows you to perform most of the standard operations (extracting some files, moving, deleting, etc.), and can also run in the background, which is especially important with large amounts of data. You can also find an online version of the archiver on the developer's website.
B1 Free Archiver screenshots
To make it easier for you to get acquainted with the interface and not waste Internet traffic, time and effort, we suggest you take a look at the available screenshots. B1 Free Archiver screenshots:
Free archiver B1 Free Archiver main features (characteristics)
To its users B1 Free Archiver offers the following options:
- Supports over 40 formats (b1, zip, rar, rar5, 7z, jar, xpi, arj, bz2, bzip2, tbz2, tbz, txz, cab, chm, chi, chq, chw, hxs, hxi, hxr, hxq, hxw , lit, cpio, deb, gz, gzip, tgz, tpz, hfs, iso, lzh, lha, lzma, rpm, tar, xar, z, taz, xz, dmg, cb7, cbr, cbt, cbz)
- Allows you to create and unpack protected archives
- Simple and user friendly interface
- Good performance
- Works fine for packing large files
- A large number of localizations, including Russian
- Windows Explorer integration
On the site site you can always find all the necessary information, the download page and the official site of the developer. Remember download the free B1 Free Archiver from the developer's site is always the right move. Unfortunately, despite the antivirus scanning of files, we cannot give you a 100% guarantee that the files are not infected. Always check downloaded files from the Internet for viruses!
| pros | Intuitive user interface. A large number of settings. |
| Minuses | Compared to other archivers, it loses in the number of functions. Carefully follow the installer steps, it offers to install unnecessary applications |
| Developer | Catalina Group |
| Download page | You can find B1 Free Archiver at this link |
| The size | 2.3 MB |
| Version | 1.7.122.0 |
| License | Free without limits |
| OS Version | Windows 98 - 7 and above, Linux (Ubuntu, Fedora), Mac OS, Android |
| 64 bit support | 64-bit OS supported |
| Portable | |
| Information | There is an online archiver. Russian language supported |
The product is registered in the State Register under the number 18428-99
PURPOSE AND SCOPE
Scope: enterprises of thermal networks, thermal points, thermal networks of objects (buildings) of industrial and domestic purposes.
DESCRIPTION
The principle of operation of the heat meter is to measure the volume (flow rate) and temperatures of the heat carrier in the forward and return pipelines and the subsequent determination of thermal energy by processing the measurements with a secondary converter.
The heat meter DIO-EETSP includes:
Heat calculator DIO-99 economic;
One or two flow sensors (flow transducers) installed on the supply and / or return pipelines;
A matched pair of resistance thermocouples.
Flow transducers and pairs of thermal transducers are given in the appendix.
Liquid flow transducers installed on the supply and return pipelines generate pulse or frequency electrical signals proportional to the flow rate of the coolant through the supply and return pipelines. These signals are sent to the heat meter, where they are converted into readings of the coolant flow through each flow measurement channel. Resistance thermal converters measure the temperature in the supply and return pipelines, followed by signal processing in the heat meter. The heat calculator calculates the volume, mass, and thermal energy based on the signals from the flow converters and resistance thermocouples.
The heat meter provides indication of thermal energy and heat carrier mass on a two-line sixteen-digit liquid crystal display.
Values of flow, mass, volume, coolant temperature in
supply and return pipelines can be transmitted to the IBM PC via the RS232 or RS485 interface and displayed in a tabular or graphical form. The heat meter produces:
Registration of working hours;
Measurement and archiving of the calculated parameters (the depth of the archive when registering 8 parameters is at least 45 days) and issuing them via the external interface RS232;
Testing and indication on the liquid crystal indicator of the state of the measuring channels;
Work in the data collection network via the RS485 interface.
MAIN SPECIFICATIONS
Temperature measurement range, °С 0... 180 ;
Temperature difference measurement range, °С 0... 180 ;
Weight measurement range, t 0...999999.9 ;
Thermal energy measurement range, Gcal 0.. .999999.9;
Capacity and bit depth of the readout device:
by temperature, °С 0.01 ... 179.99;
by temperature difference, °С 0.01 ... 179.99;
by weight, t 0.001... 999999.9
by volume, m 3 0.001 ... 999999.9
for thermal energy, Gcal 0.001... 999999.9
in time, h 0.01.. .99999.99 ;
Limits of permissible relative error for:
thermal energy at temperature difference dt>20°C, % ±4;
thermal energy at temperature difference 20°C>dt>10°C, % + 5 ;
thermal energy at temperature difference 10 0 C>dt>2 0 C, % ± 6 ;
mass, % ±2;
volume,% ±2;
time, % ± 0.01;
Limits of permissible absolute error according to:
temperature, °С + (0.4+0.004|t|);
temperature difference, °C ± 0.15;
Heat carrier temperature, °С<180
Coolant pressure, MPa 0 ... 1.6
Operating conditions:
ambient air temperature, °С minus 10... 50;
relative humidity of ambient air no more, % 95;
vibration amplitude at a frequency of 25 Hz, not more than, mm 0.1;
Power supply from the internal battery voltage, V 5.2;
Battery life, years 6;
Full service life, 12 years.
TYPE APPROVAL MARK
The type approval mark is applied to the front panel of the secondary converter and to the title page of the operational documentation.
COMPLETENESS
COMPLETENESS
VERIFICATION
Verification of heat meters DIO-99TCI1 is carried out in accordance with the verification procedure, Netdaoshchzh DI0-99TCTT Verification procedure
The calibration interval of the heat meter is 4 years.
REGULATIONS
Specifications TU 4218-001-49896887-99.
MI 2164-91 "GSP. Heat meters. Requirements for testing, metrological certification, verification".
MI 2412-97 "GSP. Water heating systems. Equations for measuring thermal energy and the amount of coolant."