Doesn't load some pages. The browser does not open the pages: Ways to solve the problem

There are several reasons why the browser stops loading pages when the Internet is working properly. It does not matter the type of device (computer or laptop), type of Internet connection (cable or Wi-Fi), type operating system and a kind of browser. An attempt to open any page leads to the fact that it takes a long time to load, after which it appears error message.

The text of the message itself may differ depending on the type of browser and may help in identifying the error. One of them is the problem with DNS address when it is not specified in the network settings, not available or specified incorrectly. Another common error is problems with the hosts file, proxy server or registry, malware.

How to fix the error

The simplest thing to do first is reload computer, modem and router. Sometimes, if the cause is a hardware failure, this can help.

At problem withDNS first of all, you need to ping any public DNS server, for example Google. If the node is not found during the ping test, then the reason is DNS unavailability. To solve the problem, it is recommended to register DNS from Google. You need to go to network connections, select your type of Internet connection, click " Properties"And register DNS Google: 8.8.8.8 ... After a reboot, everything should work.

If the problems are related to the registry, you need to go to the registry editor and select the item in its sections NKEY_ LOCAL_ MACHINE\ SOFTWARE\ Microsoft\ WindowsNT\ CurrentVersion\ Windows... Then a list of parameters will appear, among which you need to find Applnit_ DLLs... You should check its value, if it is not empty and the path to a file with the dll extension is written in it, then it must be reset. After that, the same actions need to be done with the parameter HKEY_ CURRENT_ USER and restart your computer.

This can be caused by malware and software that are often not even detected by antivirus software. In such a situation, you need to use special tools with which you need to scan your computer. These include such utilities: AdwCleaner, Dr.WebCureit, JunkwareRemovalTool and others.

If lost proxy settings, you need to check that there is nothing superfluous in its parameters. To do this, go to the properties of the browser and click the tab " Network configuration"In the Connections section. The checkbox should be on a single line: “ Automatic parameter detection". It should be noted that this will not always help, because in some cases the proxy must be set manually.

Filehosts usually does not allow you to open some sites, while some of the portals open normally. To resolve the situation, you need to go to the folder: with:\Windows\ System32\ drivers\ etc and open the hosts file. Inside it is text ending with the line 127.0.0.1 localhost. If further there are any lines with ip addresses that the user did not register, they need to be deleted and the system rebooted.

You can remove all lines from the file if necessary. This will not affect the performance of the system in any way, but some hacks can fly off if the cracks prescribed a prohibition to update some programs in this files.

When visiting Internet pages, sometimes you have to face situations when some sites do not open in the browser on Windows xp, 7, 8, 10. Most of these sites include popular social internet resources in all popular browsers such as Firefox, Opera, Chrome, Yandex browser, etc.

This happens for several reasons, and one of them the most common is the action virus programs or just malicious commands that make unwanted changes in important areas of the operating system. As a result of malicious actions, the site does not open in the browser or a substitution for a resource that looks like the original occurs.

The main problem with such cases is that common antiviruses may not recognize such viruses. For such cases, special utilities are created, for example, which are designed for one-time use, to detect and remove malicious codes of this nature and do not require installation on a computer.

(pages) in the browser

The most common reasons why sites or some pages do not open in browsers Firefox, Opera, Chrome, Yandex browser this is:

  • Changes made to system file"Hosts".
  • Problems in the registry (viruses).
  • The site is blocked by an antivirus.
  • Incorrect TCP / IP Internet Protocol settings.
  • Changes to the proxy server of the browser (the connection of a particular browser to the Internet).

Hosts file changes

This can happen, for example, as a result of visiting Internet pages, in which some files are temporarily stored on the computer, which are used to save data from sites to speed them up. next opening, as well as just for the convenience of subsequent search from history. Together with the necessary files, some dishonest sites save and run malicious commands that can make big changes in files (including Hosts) that are responsible for connecting a computer to a site (with its own IP address).

Most often, under this threat viral changes include popular social sites, such as Odnoklassniki (in the article) and Vkontakte (in the article), and popular search engines Google and Yandex.

  • The Hosts file is located in the folder C: \ Windows \ System32 \ drivers \ etc- you can open it yourself using a notepad. It looks like this.

  • This picture shows the data the specified file where the virus made changes to the IP addresses of Internet sites, leading to the fact that the listed sites do not open in the browser.
  • This is how the file should look like hosts unchanged, by extraneous virus programs.

Accordingly, if you open of this file come across records of this kind, after recording 127.0.0.1 Localhost(or # :: 1 localhost) you can safely delete them. Then restart your computer and try again to go to the site that did not open.

Registry problems

  • We go into the registry of the operating system by pressing the keys " Win + R"(For windows xp, 7, 8, 10) and in the opened window Execute we enter the command “ regedit"And click" OK"(Or input).
  • And we follow sequentially through the sections HKEY_LOCAL_MACHINE -> SOFTWARE -> Microsoft -> Windows NT -> CurrentVersion -> Windows. Here you need to pay attention to the content of the parameter " AppInit_DLLs", Shown to the right (in the third column" Value ") - its value must be empty.

  • If there are any records there, then they must be deleted (remembering the recorded location path) by clicking right click on this parameter and choosing " Change". If the path of the folder location was specified there, then you need to open it and delete the specified file.

The presence of a virus

Currently, there are more and more viruses specialized in infecting browser pages, replacing or displaying advertisements in the browser. Most often, such smart viruses are disguised as browser add-ons or extensions, or the action of a shortcut to launch another file (in properties) changes, etc. and antiviruses cannot recognize harmful actions in them, but are only noticed as an advertising virus on open page site and may even block it.

  • V this case we recommend that you check your computer special utilities(in detail in the article).
  • Social networks and other popular resources primarily fall under their action, since because of their popularity, they are being developed for them.

The site does not open due to virus damage to the TCP / IP protocol

Another common reason why sites may not open. As a result of the actions of malicious programs, important areas of the computer are damaged, which are responsible for the correct connection to the Internet.

Correcting the TCP / IP settings is not that difficult. For this:

  • We open " Start", We find" Execute"(You can use the search) or just press the key combination" Win + R«.

  • In the window that opens, enter the command “ CMD"And click" OK«.
  • We enter the command “ route-f"And again press" Input«.
  • Now you need to enter " netsh winsock reset"And then click" OK«.

After completing these steps, you need to restart your computer and after that you can already try to check whether the site is opening or not.

Unfaithful proxy settings browser

These settings are at risk of being damaged by viruses. This is used by the creators of these virus programs to change the data of the browser's connection to the Internet and, as a result, replace the opened resource pages.

Let's consider setting up a proxy server using an example Chrome browser(in other browsers the principle is similar, you just need to look in the settings):

  • Go to the browser menu and click the settings " Settings«.

  • We find below " Show advanced settings«.

  • Further, below there will be a tab “ Change proxy settings»Click on it.

  • After that, click on " Network configuration«

  • The checkbox should be set here to " Automatic parameter detection". If other parameters are set and the checkbox " Use a proxy server for ..."(Below), remove this checkbox and set automatic detection and click" OK«

If your computer started malicious viruses and the browser was damaged, then be sure to check the computer not only with the installed antivirus, but with special utilities (for example, a free one created as an additional virus cleaner), since the cause may not yet be resolved.

Today we are all heavily dependent on the Internet. And when he does not work, panic immediately begins, the heart sinks into his heels and life seems meaningless. Maybe you find it funny, but for some it really is.

Especially the user is lost when the Internet is connected but not working. Today I will tell you why this happens and what to do if this happens to your network.

Why is the internet not working?

If you have an Internet connection, but it does not work, the first step is to find the cause of the problem. To do this, you need to reboot all devices that are associated with access to the Internet. This refers to a router, computer and so on. Most often, such a reboot completely solves all problems with the Internet, and it starts working properly. If after rebooting the router and computer, you did not receive the expected result, proceed to the next "treatment" procedures.

Today, most often the Internet is connected by means of Wi-Fi router... If you also have it, then you need to check if the Internet access indicator on the router is on or not. For those users who use TP-Link router, internet signal is marked with a globe icon. On other routers, this signal is most often signed by "Internet".



If the indicator is off, you need to check the router settings. If everything is normal with them, then we call the technical support of our provider and ask why there is no Internet, perhaps just repairing the highway or network.

But, if the indicator is on, then there is a connection and the provider is not to blame. Check internet access on other devices. It doesn't matter what it will be - a phone, tablet or other laptop. That way, you can figure out which direction to dig next to solve the problem. I will say right away that the case when the router is connected to the Internet, which is obviously good for working, but at the same time it does not distribute it to other devices, is considered a very rare case. The reason for this problem lies in router failures. It is not difficult to fix this. You need to reset all the settings to the standard ones and reconfigure it again, remember that after the reset, all settings will fly off and the Internet may not work until the router is configured correctly!

Often there are cases when only one device or computer cannot connect to the Internet using a router, and all the rest can easily go to eat. In this case, you need to look for the reason directly on this device.

If you are connected to mobile Internet via a USB modem or WiFi module connected to the USB port, then try disconnecting and reconnecting it. If that doesn't work, try using a different port for your connection. Perhaps reinstalling the driver will help you fix this problem.

Checking your Internet connection in Windows

In the case when the Internet is connected on your PC or laptop, but does not work, and at the same time you are absolutely sure that the reason for this is incorrect settings, then you need to follow a series of procedures that will quickly solve your problem.

You need to start reconfiguring by pinging any popular site. To do this, you need to press the combination "Win + R". This will bring up the "Run" window.

In the text entry field, you need to enter the following "cmd" and click on "OK" .. If you are not a fan of my site, you can write google. After that, click on the enter and wait for the result. If all is well, the server will send you something like this:



If the response from the server contains the line "During ping, the host could not be foundpec-komp.com. Check the hostname and try again ", then you need to type another command, for example" ping .8.8.8.8 ". This is the IP address of the public DNS server from Google, which will always be available. If the computer has access to the external network, then the answer will be the same as in the picture above, but with different numbers after "answer from ...".

If the ping passes by the IP address, but it does not open in the browser, then most often this indicates that there is an Internet connection, but the network does not work for a reason wrong setting network card, namely, the DNS server address is not spelled out or is not spelled out in them. How to fix this, I will tell you a little later.

If you see a different response from the server, then you need to check access to the router. We will also check using ping. You can find out the IP address of the router on a sticker that is glued to the back of its case. Most often, the IP address of the "192.168.1.1" or "192.168.0.1" routers. The first address is registered on my router, so I got the following answer:



If the router pings, but there is no Internet host, then most likely the reason lies again in the settings of the router or in itself.

But if the router is unavailable for server requests, then there is a reason to get into the settings network adapter on the computer. But, before doing this, disable your antivirus and firewall, if any. Sometimes it is these two "comrades" that cause problems with the Internet.

If after that the Internet does not work, although there is also a connection, press the "Win + R" key combination again, but now in the "open" field we write "ncpa.cpl."

If you have registered everything correctly, then the network window will open. Windows connections... In it you need to find your active connection and right-click on it, then select "properties". In the window that opens, look for the line "IP version 4 (TCP / IPv4)" and click on it twice to open the protocol parameters ...

Check "get IP-address automatically" and "get DNS-server address automatically". Click ok and check the result in the browser.

If this does not help, then mark the point "Use the following addresses" with a dot. You need to register the IP address from the subnet of your router. If it has an IP of 192.168.0.1, then set the computer to 192.168.0.2. If the router uses 192.168.1.1 , then on the PC it will be 192.168.1.2. The mask is 255.255.255.0. You must specify the address of the router as the gateway. Write it down as your preferred DNS server. Alternative DNS, you can specify the server from Google - 8.8.8.8.

In any case, watch my video on speeding up the Internet, if you apply all the settings, then the Internet should work.

We increase the speed of the Internet to the maximum!


I hope that at least one of the ways will definitely help you regain access to the Internet. If none of the solutions to the problem helped you, then you will have to call a specialist who will determine the true cause and solve this problem. But I am sure that it will not come to this and you will fix everything yourself.

There are various reasons why the Internet browser cannot open web pages. This is often due to the inability to establish a connection to the servers. However, there are others. technical problems... In any case, in order for the browser to work normally, you will need to identify the root cause of the error and eliminate it. Let's take a closer look at how to do this.

Internet connection problems

Despite the fact that it would seem obvious, many users forget that problems with opening web pages can be due to a lack of internet connection. First, see if there is a connection. This can be done by clicking on the antenna icon in the lower right corner of the screen.

If this is the problem, try the following. In the case when the connection is made directly through the cable to the computer, remove and insert the wire back. If you have a router, then check if the wires have come off and then reboot the device. For a 3G modem, you need to see if it is fully inserted into the USB connector. After all the above steps, restart your computer and try again to restore the connection.

What to do if the reasons are in the computer itself

There are situations when programs on the computer download updates, ICQ and Skype are working, in other words, there is a connection, but the Internet browser does not open sites. Let's see what to do if Chrome, Mozilla or another browser does not open. The reason for this situation may be a virus that you "picked up" on not very reliable sites. The main thing to do in this case is to install antivirus program, with which you need to scan the entire system. If the antivirus cannot remove some viruses, then be aware that there are several.

In addition, you should pay attention to the hosts file on your computer. In order to find it, go to My Computer - Disk C. Next, select windows folder, and in it we go to the system32 tab. Here we click on the links drivers - etc. Hosts file opens with regular Notepad or any text editor... It should contain only lines starting with a # sign and 127.0.0.1 localhost. You can safely erase any other inscriptions. By the way, this file can be used to deny access from a computer to any site.

Other reasons

Now let's consider what to do if the Yandex browser or any other browser does not open, for any other reason. For example, error 105 appears, indicating that the server's DNS address cannot be resolved. It happens that the main problem lies in the computer settings, which we will now try to fix.

First you need to look at the parameters of the network connection. Here it is desirable to set the ability to receive IP automatically. Since in our case the problem is with DNS, you can try to change the information in this section. For example, write the following data here: 8.8.8.8. - 8.8.4.4. Next, we restart the computer and try to open the browser again. If the pages started loading - great, we found the problem, if not - we are looking further.

You can check the browser itself for operability. To do this, you need to disable all extensions in it. Each Internet browser has its own settings. This is usually the Extensions, Tools or Add-ons menu. After you change the settings, the computer needs to be restarted, and again try to open the Internet pages.

I hope that my advice will be useful to you, and you can deal with the problem. If not, then continue to search further for the reason why your pages are not loading in your browser. It is quite possible that they can be eliminated quite simply, and you can again easily go to the Internet in search of the information you need.

In this article, we will consider a rather ambiguous problem: there is a network connection, but in the browser it is impossible to go to some web resource. It is true, at times, a situation may arise in which it will be clearly indicated in the notification area that the user has access to the Internet, i.e. there is no red cross or yellow exclamation mark on the connection icon, but the browser is persistently trying to prove the opposite by giving various errors and problem notifications.

Reading these lines, you yourself have probably encountered this strange problem yourself. Fortunately, there are a number of methods you can use to try and fix this mess. It is also worth noting that this problem can occur on absolutely all versions of the operating room Windows systems, connection types and browsers, so no one is left behind. So let's see what you can do if network access is observed but the browser refuses to work.

Well, as we said at the very beginning of the article, the problem is extremely ambiguous - and there may be a huge number of reasons behind it. Nevertheless, we recommend that you simply follow a series of several solutions, which will probably be able to get you out of this not very clear situation. Let's see what you can do ...

Change the DNS server address of the network connection

First of all, try using a different DNS server to see if the problem is yours provided by your ISP. The fact is that sometimes the provider's DNS server may experience some kind of problems during its operation, as a result of which the connection to the network technically remains, but it becomes impossible to switch to any web resource. As a rule, providers solve such problems extremely quickly, however, you can check this probability simply by using the services of Google's public DNS servers.

How to do it? You just need to change the DNS server address for your network connection - and the trick is in the bag. This is done in an elementary way (the steps were taken using the example of Windows 10, but you can use them for other versions of the system):

  • right-click on the network connection icon in the notification area and select "Open Network and Internet Settings";
  • then click on the option "Configure adapter parameters";
  • find your network connection(adapter) and double-click on it with the left mouse button to go to properties;
  • then click on the "Properties" button;
  • select "IP version 4" or "IP version 6" (depending on the type of your network connection) and click the "Properties" button;
  • put a tick on the option "Use the following DNS server addresses";
  • put the address 8.8.8.8. for the main and 8.8.4.4. for an alternative DNS server;
  • save your changes.

After changing the parameters of your network connection, try to go to your browser and go to some web resource. As a rule, this problem still arises due to the temporarily inoperative DNS server of the provider, which, as you already know, can be easily bypassed.

Well, did you manage to fix the problem? If not, let's move on. And then we have another solution that concerns DNS.

Clear the DNS cache on your computer

You may have lost the ability to navigate to web resources through a browser due to DNS cache that has accumulated on your system. This happens sometimes - and this problem is solved with a simple command entered in the system console.

So, in order to flush the DNS resolver cache, you need to do the following:

  • press the key combination Windows + X;
  • after opening the console, enter the command into it ipconfig / flushdns and press Enter;
  • wait for the command to finish and close the console.

Open your browser and try visiting a website. If the result is zero, try restarting your computer after executing the command, and then check your browser again. It didn't help - we move on.

Disable proxy server in connection settings

Another reason why you might have difficulty navigating to various resources on the network is the activated function to use a proxy server for local connections. You may have activated this feature yourself, perhaps some application on your system made it. One way or another, you need to check if it is enabled. To do this, do the following:

  • click Windows + S;
  • enter "Control Panel" in the search engine and select the found element of the system;
  • open the section "Browser settings" in the panel;
  • go to the "Connections" tab and click on the "Network Settings" button;
  • if next to the option "Use a proxy server for local connections(does not apply to dial-up or VPN connections) "there is a check mark, then remove it and save the changes;
  • restart your computer.

If you really had the specified function activated for some reason, then by disabling it, open the browser and check if you can go to some page on the network.

Reset your network connection settings

Who knows, maybe something was changed in the settings of the parameters of your network connection, after which you can no longer normally use it to access the Internet. Fortunately, you can easily reset these parameters using a few commands. To apply them, you need to do the following:

  • press the key combination Windows + X;
  • select "Command line (administrator)";
  • After opening the console, enter the following set of commands into it:
    • ipconfig / flushdns
    • ipconfig / registerdns
    • ipconfig / renew
    • ipconfig / release
  • when you have finished entering commands, restart your computer.

Open your browser again and check if everything is in place. As a rule, by this point, many users have succeeded in fixing the problem. However, if you still did not succeed, then we still have one last piece of advice for you: use some kind of antivirus and scan the system for viruses. Yes, if you still did not manage to use your network connection normally, then, most likely, some kind of virus was involved that got into the system.

Found a typo? Select the text and press Ctrl + Enter