Remember how in childhood parents cared for us so far? Ten minutes after a favorite book or television program - and in bed. Now sending "under the blanket" accounts for not only children, but also computers.
Why happens to turn off the computer by timer? Isn't it easier to do it when you get up because of it? The reasons may be a lot:
- You leave a big download at night and count on how much it can last
- You go to bed to, for example, watch a movie, and install the timer for a while almost immediately after it is completed.
- You go out of the house, but the computer should be open for some time remote access
- You regularly leave in a hurry and you can simply forget to turn off the computer, especially if the monitor after inactivity went out
Even one of these reasons is enough to use a deferred shutdown. Especially (as we see below), dig deep, how to put a computer on the timer, you will not have to.
Built-in timer Windows
Very often we use Windows, not noticing all the power of this operating system. But among its functions there are very many non-obvious - such, for example, how to put a computer on the shutdown timer. Suppose you have Windows current version - from 7 to 10.
We hope you do not frighten the concept of "command line"? If you have grown in the MS-DOS era or you are interested in administrative, it should not. But even if you are far from this, nothing terrible to use command line no. This is the most powerful Windows management tool, and the extensive certificate of commands will allow you to achieve goals literally in one pressing Enter.
To invoke a command line, you can simultaneously press the R and WIN key on the keyboard (with the Windows logo). Another way to enter the Start menu, and there in the "All Programs / Standard" section find the "Run" string. The result will be the same: you will open a window with a field of input, stingy and not containing anything more.
Suppose you need to turn off the computer in 5 minutes. Now you need to enter a command having a formula type:
As you know from the English course, Shutdown means "shutdown". Parameter -s (Suspend) is needed for deferred command execution and requires that we indicate the time to turn off. Time (which is logical) is denoted by the letter T (from the word TIME) and is indicated in seconds. In our case, 300 seconds correspond to 5 minutes. If you are watching a two-hour movie and want to set a computer shutdown timer with a five-minute reserve, then you need to multiply 2 hours 5 minutes (or 125 minutes) for 60 seconds. It turns out 7500 - this number it will be necessary to substitute in a simple expression.
If you have any programs that interfere with the closure during your computer, you should add the -f (Forced) parameter at the end of the command. When applied, all operating programs will be closed forcibly.
And what if for some reason you change my mind to turn off the computer? No, you do not have to think, red or blue wiring cut. Just run the command prompt again and enter the command.
shutdown -a.
"A" in this case Means "ABORT" - interrupt. Waiting for its own hour, the command to turn off the computer is thus canceled.
So you (possibly) will have to spend some time studying basic capabilities team windows strings (More precisely, now the more powerful tool is PowerShell, but for us it is still a command line). Nothing, it will pay off: electricity bills will become less, and the computer will last longer.
Delayed off in one click
If you constantly use a postponed shutdown of a computer, then it makes sense to automate the process and create a shortcut for quickly launching the command. It is done standard means Windows:
- Press "Next"
- Enter a name for a shortcut (for example, "Turn off later")
- Press "ready"
This method has only one inconvenience: to change the time to turn off, you will have to edit the properties of the label. This is done again through the right click, after which you choose the item "Properties" and in the Line "Object" change the time for the desired one.
Scheduler
There is another one in Windows powerful tool For task planning: scheduler. How to turn off the computer by timerthrough the planner? First you need to call it:
In the window that opens, select the "Create Simple Task" option, name it, for example, "timer" and specify frequency. In case you may not have time to turn off the computer before leaving for a job or need access to it at a certain time, select "Daily", in another case, "once".
In the next window, set the shutdown time. Click "Next", in the next window, select "Run the program".
And then we are waiting for old friends. In the "Team or Scenario" line, you need to enter the team already known to us. shutdown -s." We will not need the remaining parameters: after all, we have already settled at the previous stage.
This method is good if the task of turning off the computer gets up to you regularly. In addition, the planner is worthy of learning and for other purposes.
Additional means of postponed computer shutdown
Not just so we started with the transfer of cases when we need a deferred shutdown! We can either watch the cinema, or listen to music, or download torrents or just files from the network and so on. In this case, it is more convenient to set exact time shutdown, and an event in the program (by completing injection / movies / playlist, etc.) Consider programs that will make all the work for us:
μTorrent
This popular torrent client can, having finished downloading, turn off the computer or translate it into standby mode. Open the Main window μTorrent, go to the "Settings" menu and to "Complete windows work"(It is at the bottom of the menu).
Here you will find a huge selection of options, but in essence they are reduced to a simple set. The application may after completing all downloads (or after completing all downloads and distributions, but, as you know, you can distribute infinitely) to make one of the actions: turn off the computer, go to sleep mode, go to standby mode, restart Windows or close only yourself. We are understandable, interests the first item. So, you should select the first string of the last partition - "shutdown upon completion of downloads".
Download Master.
When you leave the bulk download at night, you can configure the most popular download manager so that it automatically turn off the computer after. To do this, open the "Settings" menu, select "Automation" and in the "Upon completion of all downloads" menu, select the "Turn off PC" option.
The same program allows you to turn off the computer in a strictly specified time. Open the "Tools" section, the "Schedule" item, activate the "Complete Schedule" positions and "Turn off the computer", then set the completion time and click "Apply".
Aimp.
The player most popular in the post-Soviet space, inherited Winamp, also allows you to turn off the computer after playing playlist. To do this, go to the menu, open the "Planner" item and select "Turn off the computer" item. In the window from the menu, you will be a huge option of options: Turn off after playlist playback, queues, after one track or file, and also (which is most interesting for us) at a specified time.
However, all the options are interesting in their own way. If you decide to listen to music before going to bed, you can configure and turn off after the playlist or queue.
Media Player Classic
One of the most popular video players is also capable of turning off the computer, finishing playback. To do this, do not even need any tricks (as, for example, with its VLC competitor). Just run the player, select the "Play" section, then "at the end" and select the "Turn off Computer" option. Thus, you don't even have to get out of bed to turn off the PC just after watching the movie. Especially if you light up in the process.
So you have a good viewing, successful downloads and pleasant dreams!
Overview of the simplest and most popular free programs.
To turn off the computer on the schedule.
Here, you can download the software you like and try it in practice.
The author unobtrusively reminds that Microsoft Corporation is extremely negative about ( software) third-party developers, since it (this is the most software) can lead to destabilization of the entire operating system.
As before, the most proven and reliable way is to use built-in (full) funds Windows - and.
Programs to turn off the computer on schedule
(Download free programs)
Additionally:
Turning off the computer on schedule
built-in (regular) Windows tools
Simplest BAT files to turn off the computer
Developer: Site :) :) :)
BAT files are Windows executive files with an extension. Bat, click on which the scenario of actions is executed, which is recorded inside this BAT file. In this case, in the code of the applied BAT files, a command to turn off the computer, as well as the commands to cancel the commands already received to turn off the computer.
Use these BAT files is extremely simple. You need to download them just and click on them. The computer will be turned off or at a specified time or at a given period of time.
To change the value of the specified time, you need to click on the BAT-file of the right mouse button and in the drop-down context menu, select the "Change" option. After that, the text part of the BAT file will open in a notepad where you can set your time and save the changes.
The advantages of this method of turning off the computer is the complete absence of viral and unconditional work in any Windows. The disadvantages include exemption from the text of the BAT file. However, if such a file is configured once and put in the startup dadget - the effect is obtained, very nothing.
Attention! Bat-files offered for download do not have user interface. A simple clique on a BAT file leads to an immediate installation or cancellation of a disposable command for turning off the computer.
Download Switching Timer.Bat - (Dropping: 3952)
To change the timer time, you need to change in the download-timer-timer download file, in the Shutdown / S / F / T 1000 line, the number 1000 on its value, where 1000 is the number of seconds before turning off the computer from the moment click on the "Shut-off -Timemer.Bat "
Download Switching-exact time. Bat - (Dropping: 1304)
To change the exact time you need to change in the downloaded "Turning-exact time.bat" file, in the line at 21:51 shutdown / r / f, the number 21:51 on your value, where 21:51 is the exact time of the computer shutdown after clicking on the file "Switching-timer.bat"
Download Turning off-Cancel Team.Bat - (Dropping: 844)
You don't need to change anything in the "Switch-Cancel" file. Click on this downloaded file will cancel all the previously assigned commands to turn off the computer.
OFF TIMER - the simplest compute
Developer: Egor Ivakhnenko, 2010
Miniature simplest Russian-language program for one-time shutdown of the computer at a specified time. In principle, Off Timer is analogue and continuing the topic "The simplest BAT files to turn off the computer" with the only difference that the program has a user interface.
Does not require installation, Portable, works from any folder. The last property is very important for the programs of this type - I did not like it, threw out all things. The program has a minimum of settings in which it is very easy to figure out even in the screenshot. Perfectly works on any windows, because it uses its tools to turn off. It can be successfully replaced by the standard "Turn off" OS winds.
PowerOff - the most powerful timer to turn off Windows
Of PowerOff program program
In conclusion, the most powerful and multifunctional tool for turning off the computer under windows control - Timer PowerOf.. The program is simply reliced \u200b\u200bby all sorts of "commensus", which comes to the idea of \u200b\u200bthe adequacy of its authors and its users. Functional PowerOf. It is incredibly extensive and allows you to make such exploits how to schedule a computer shutdown for every day at different times or turning off the computer after listening to the specified number of musical tracks. It lacks only the functions of the scheduled computer shutdown after the specified number of dried beer cans :) :) :).
Developer of the operating system Windows It is possible to schedule. As such, the shutdown buttons indicating the parameters does not exist. To do this, use the command line and other regular (built-in) means Windows. This method is especially good because it works always and everywhere, since it is developed and provided directly to the developer itself by the operating system. Verified on Windows XP, Windows 7, Windows 8.1
Who is not interested in the theory, can immediately go to the sections:
-
-
Turning off or restarting computer on schedule
(At a specified time) full-time (built-in) Windows tools
Scheduled
(At a specified time) from the command line (MS DOS)
From time immemorial, the package of all operating systems of the MS Windows family includes a disk operating system (abbreviated - MS DOS.), which has no usual user interface for the "Batzan" on it with the mouse. MS DOS control is made by keyboard introduction of text commands in a special window, in the so-called command line . The command line works on any computer under the control of any modification of the MS Windows operating system.
In the operating system MS WindowsFrom the command line you can do absolutely everything, for which this system is capable.
TO omandy string You can call one way:
- press the key combination Win + R.introduce cmd.exe., click OK
- "Start\u003e execute menu", enter cmd.exe., click OK
- "Start\u003e Menu\u003e All Programs\u003e Standard\u003e Command Line"
In any case, the window opens MS DOS.
(Command line to enter the text command)
It is in it (on the command line) we will:
- turn on and off the countdown to
shutdown or rebooting a computer
(i.e. indicate how much time action) - assign and cancel accurate for
shutdown or rebooting a computer
(i.e. indicate when it is to perform an action)
All manipulations are referred to to file shutdown.exe.
and to specify the desired parameters
SHUTDOWN command parameters and syntax
(To access the shutdown.exe file)
File shutdown.exe. responsible for turning off the operating system Windows, It is rebooted, etc. To get a list of file start settings shutdown.exe. From the command line - click the keyboard key Win + R., in the window that opens, enter cmd.exe. (go to MS DOS) and already in the DOS-Ovsky window (manually) introduce " shutdown /?"(Without quotes). Click "OK" (key "ENTER"). In response, the system will issue a complete list of command parameters shutdown.:
As for the syntax of the parameters for the command shutdown.T. MS DOS. Understands both options for recording - and through a hyphen (a minus sign " - »On the numeric keypad) and through the layer (oblique line on the numeric keypad):
- shutdown / S / F / T 2000 equivalent shutdown -s -f -t 2000
- aT 23:15 Shutdown / R / F equivalent at 23:15 shutdown -r -f
In our case, there is no fundamental difference between the slash and the hyphen. Much more important to remember the layout of spaces (Space). Since, in understanding the operating system, flash is equal to the hyphen with a space , without a space - may not work.
For example, on the screenshot at the top, I put the commands in turn " shutdown-?"And" shutdown -?", as well as " shutdown /?"And" shutdown /?" The response of the system is obvious.
Simplified Enter Shutdown Team
(window "Run")
To turn on or off the countdown timer - open the "Run" window ( Win + R. OK.
Time to turn off (reboot) Computer must be administered in seconds.
The correct command entry is confirmed by the corresponding pop-ups in the tray. Pop-up windows should appear after each proper command introduction. They look like this:
 |
System reaction to the Turn off or restart the computer through 33min \u003d 2000 seconds |
 |
System reaction to the command on the cancellation of the command to turn off or restart the computer |
 |
10 minutes before the task is fulfilled, the system begins to remind the immediate end of the countdown. The reminder form may have several options. Probably depends on the version of Windows and style style. |
 |
A few minutes before the task is completed, the system notifies the immediate end of the countdown. |
Install from the command line
Current time of the current date
To turn off and restart the computer
Setting the exact time of the current date from allows you to assign the exact time of the current date to turn off or restart the computer. This task will be fulfilled only once, after which the task assignment procedure will need to be repeated. If it is necessary that the computer systematically turned on the schedule (at the same time), then you need to use or
To set the exact time of the current date to turn off or restart the computer - open the "Run" window ( Win + R.), enter the desired command and click OK.
Turning off (reboot) the computer must be entered in the specified format.
Time values \u200b\u200bnaturally have their own.
Unlike the installation, the correct command input when assigning the shutdown time or restarting the computer is not confirmed by the corresponding pop-up windows in the tray.
From the command line it is convenient to create Disposable Task to turn off or restart the computer. If a systematic shutdown is required on a scheduled computer (for example, at a specified time, at the end of the working day), then you need to set off the time after or through
Turning off and restarting the computer
Using the executive (batch) file
Executive (batch) files with expansion .bat. () Makes much easier with the command line. Once by creating such a BAT file with the text of the desired command, you can perform it with a simple click on the batch file, without a tiring call, the command line window and enter the text text.
Recall the list of our teams and create the corresponding batch files:
- shutdown / S / F / T 2000or shutdown -s -f -t 2000
(turn off the computer through 33min \u003d 2000 seconds) - shutdown / R / F / T 2000or shutdown -R -F -T 2000
(Reload the computer through 33min \u003d 2000 seconds) - aT 23:15 Shutdown / S / For aT 23:15 Shutdown -S -f
(Turn off the computer today, at 23:15) - aT 23:15 Shutdown / R / For at 23:15 shutdown -r -f
(Reload the computer today, at 23:15) - shutdown / A.or shutdown -a.
(Cancel off on / rebooting a computer)
To create an executive (batch) batch file - open a notebook, copy (write) to it the desired team string and save the file with extension.Bat. For the example, create two files - "Turning off.bat" file and the "Cancel .Bat" file. In the first file we write the string " shutdown / S / F / T 2000"(Without quotes), in the second line" shutdown / A."(Without quotes). Click on the first file will give a command to turn off the computer through 33min \u003d 2000 seconds. Click on the second file will cancel the command for turning off the computer through 33min \u003d 2000 seconds. Thus, we will get two files, clicking on which we will have the same effect as if you call the necessary command in it.
It's very simple, and is much more convenient than the command line. So, this method gives space for fantasy flight and creative thought. For example, you can set the timeout at 28800 seconds. (28800 sec \u003d 8 hours \u003d working day length), put the "Turning off.bat" file into the computer's startup folder and no longer worry about shutting down at the end of the working day. Because, every time, when loading the system, it will receive a command to turn off after 8 hours \u003d 28800 seconds. The same effect will give an executive .Bat file in the autoload, with the content " aT 17:00 Shutdown / S / F"(Without quotes). Moreover, this command is even preferable because it sets the exact time of the computer shutdown and does not depend on the number of reboots during the working day.
Joke. If you set in the BAT file, in the startup folder, the timeout is 180 seconds., Then the computer will turn off 3 minutes after its launch.
Turning off and restarting the computer
At a specified time through the task scheduler
Task Scheduler - Special Chip Windows. Task Scheduler allows you to create and perform various scheduled tasks. In our case, it is systematically turned off or restart the computer in specified time. In contrast, the task scheduler allows you to more flexibly assign the exact time and frequency of the computer.
To set off or restart the computer at a specified time through the task scheduler - open the task scheduler. It is located in "Start\u003e Menu\u003e All Programs\u003e Standard\u003e Officers\u003e Task Scheduler"
Then, in the window that opens, write the name of the task and its description. Here you can write everything that your heart. The name of the task and its description will then be displayed in the middle column of the scheduler after creating a task. I wrote a name - "shutdown", description - "Turn off the computer" and pressed the "Next" button ...
In the next window that opens, you need to select the frequency of the task. I chose - "Daily". "Further"...
In the next window that opens, you need to specify the date with which to start performing the task and the time of its execution. By default, the current date and time values \u200b\u200bare detected. Date can be left unchanged (start today), but you need to put your time. This will be the desired computer shutdown time. I set 17:00:00, which corresponds to the end of my working day. The string "repeat every 1 day" - left unchanged. "Further"...
In the next window that opens, you need to install a switch (Checkbox) against the words "Run the program". "Further"...
In the next window that opens, in the "Program or Scenario" line, we enter the command " shutdown."(Without quotes), and in the" Add Arguments "field" -s -f."(Without quotes) - to turn off. If you need to restart the computer, then in the "Add Arguments" field, we enter " -R -f."(Without quotes). "Further"...
Click the "Finish" button. Task by daily shutdown of computer at 17:00 - Created and running. Check work or delete task as follows. We run the scheduler, click on the "job scheduler library" and in the middle column we find the desired task (by name). Right-click Mouse click on it and select the desired menu in the drop-down menu.
To check, I clicked on "execute". The computer responded instantly. Works, Hurray!
Turning off the computer
Turn off the computer from the command line
1. Using the "Run" menu
To activate the shutdown timer, you will need a single command - shutdown -s -t xxx. Instead of three ices, you need to enter the time in seconds through which it will turn off. For example, if you enter Shutdown -S -T 3600, the system will turn off after one hour.
Press the Win + R keys (open), enter the command in the field and click Enter or OK.
If you want to cancel the shutdown, press Win + R again, enter Shutdown -a and click OK.
2. Using the "task scheduler"
In this way, you do not start the timer literally: the computer will not turn off after the expiration of some time, but exactly at the specified time.
First open the task scheduler menu. To do this, press Win + R, enter the Taskschd.msc command in the field and press ENTER.
Now schedule shutdown. Click on right panel "Create a simple task", and then specify its parameters in the wizard window: any name, repetition mode, date and execution time. Choose "Run the program" as a validity of the task. In the "Program or Script" field, enter Shutdown, and in the next line, specify the -s argument. After that, click "Finish".
If you want to cancel the shutdown, open the "job scheduler" again. Then click on the left pane of the job scheduler library, select the created task in the list that appears and click on the right panel "Disable".
3. Using third-party
If you do not want to remember the commands and dig in, use third-party programs. For example, the PC Sleep utility can turn off the touch of a timer or exactly at the specified time. She is free and very simple.
To activate the shutdown timer in PC Sleep, run the program and select Shutdown in the Function Select menu. Then mark the Shutdown IN point and specify the time through which the system should turn off. After that click Start to start the countdown.
To cancel shutdown, it is enough to deploy the program window and click on the STOP button.
PC Sleep can also be configured to turn off the computer at exactly the specified time. To do this, instead of Shutdown in, choose Shutdown AT. In addition, you can plan not only shutdown, but also other actions: reboot, hibernation, transition to sleep mode and output from the system. These options are also available in the Function SELECT list.
If you want the computer to fall asleep after the end of the films, you can also read about the program.
How to configure computer shutdown timer with MacOS
1. With the "Terminal"
The Sudo Shutdown -H + XX command turns off Mac at the time. Instead of ICs, enter the number of minutes. For example, if you dial Sudo Shutdown -h +60, the shutdown timer will work after one hour.
To enter the command, open the Terminal application, type or copy the characters specified above and press ENTER. If necessary, enter the administrator. After that, the countdown starts up to shutdown. To cancel it, open the "Terminal" again, enter the Sudo Killall Shutdown and press ENTER.
2. Using the Energy Saving menu
In this section, you can schedule the computer shutdown at the specified time. Lower the Apple menu and click " System settings"→" Energy Saving "→" Schedule ". In the window that opens, check the "Off" item, specify the day of the week and time.
When it comes to the time, the shutdown warning appears on the screen. If you do not use the cancel button, the system will turn off after 10 minutes.
Turning off the Timeru computer is a very typical task that many users face. However, not everyone knows how this task can be solved. In this article, we will tell about how to turn off the computer on the timer in Windows 7, 8, 10 and XP. To solve this task, we will use the command line, task scheduler and third-party programs.
Turn off the touch computer using the command line
The easiest I. fast way Turn off the Timera computer This is used by the "Shutdown" command, which works equally well in Windows 7, and in the rest windows versions. This command can be performed from the command line or using the "Run" menu.
The ShutDown command has many parameters that allow you to finely configure the process of turning off the computer. Below we will look at the most basic ones:
- / s - turning off the computer;
- / h - transition to hibernation mode;
- / F - Forced completion of all open programs without a user warning;
- / T - Installation Timer in seconds.
In order to turn off the touch computer using the ShutDown command, we need to use the / s parameters and / t (Timer Setting). Thus, the command to turn off the computer will look like this:
- Shutdown / S / T 60
After executing such a command through the command line or the "Run" menu, the computer will turn off after 60 seconds.
If you want to restart the computer by timer, then instead of the / s parameter you need to use the / R. The same with the mode of hibernation. Using / H instead of / s and computer instead of inclusion, go into hibernation mode. You can also add a parameter / f. In this case, turning off (reboot, hibernation) will begin immediately, and all running programs will be closed without a user warning.
The disadvantage of this method of turning off the computer is that the switching task is created only at once. If you need to turn off the computer on the timer daily, then you need to use the scheduler of tasks or programs from third-party developers.
Use the Planner to turn off the Timela Computer
In operating rooms windows systems 7, 8, 10 and XP A very powerful tool called "Task Scheduler" is available. You can use it to turn off the computer on the timer. In order to open the task scheduler, run the Start menu (or start-up screen with tiles if you use Windows 8) and enter the job scheduler search. Also, the task scheduler can be launched using the Taskschd.msc command.
After starting the task scheduler, click on the "Create a simple task" button. This button is located on the right side of the window.
Further we offer to specify when we want to perform this task. You can choose "once" if you want to turn off the touch computer only once. If you need to turn off the computer by timer daily or otherwise, you can choose another, more suitable for you.
At the next step, you need to specify the triggering of this task.
After that, we need to enter the ShutDown command as well as the startup parameters. About how the startup parameters are used above mentioned above.
All, the task of turning off the computer on the timer is created. You can view it in the task library.
Of context menu (Right click on the mouse) you can manage the task created.
You can execute, complete, disable, delete or open the task properties.
Programs to turn off the computer by timer
If the described methods of turning off the computer on the timer are not suitable for you or seem too complicated, then you can turn off the computer using third-party programs. Below we consider several such programs.
Powerful free program To turn off the computer by timer. Through powerOff program programs You can configure almost any trifle. On the other hand, due to the huge number of functions, the interface of this program is too overloaded. What to figure it out is very difficult.
A small program to turn off the computer. The Switch OFF program is equipped with a small number of functions and has an easy and understandable interface. The program is equipped with a built-in web server that allows you to turn off the computer by local network or via the Internet.
The developer of this program to turn off the computer by timer declares only Windows 7, 8 and XP support. Although on Windows 10 it should work without problems.