How to start safe mode on your computer. How to enter safe mode on pc

If the operating system is infected by a virus or software glitch, then safe mode in Windows 7 - best helper in such situation. What this mode is, and how to enter it, will be described below.

What is Safe Mode?

Safe Mode or Limited Functionality - Special State operating system which enables the user to eliminate software or hardware errors.

When starting this mode, the OS loads the number of programs that is necessary for the minimum functioning of the personal computer:

Standard system services;
Input device drivers (mouse, keyboard);
Disk software, etc.

There are three main differences between safe startup and standard startup. Windows boot:

The minimum number of active programs;
Instead of the usual software package of the video card, the standard VGA is launched;
The desktop is loaded with a resolution of 640 by 480 pixels. There is a corresponding inscription at the bottom.

What is reduced functionality mode for?

In this boot option, the computer user can take steps to correct errors associated with the operating system. In particular:

Virus removal . Banners that block the user from accessing the system during normal download do not appear during limited functionality. This will quickly get rid of the malware;
OS recovery . If after updating Windows drivers 7 does not start, then the system can be returned to a working state through the recovery tool, which can be turned on in this mode;
Uninstalling installed hardware . If, after installing new hardware, the system starts to fail, you can uninstall the software using the safe boot option.

Starting Safe Mode

There are two ways to start Safe Mode in Windows 7:

When loading the operating system in the choice of startup options;
Login from a running OS by changing parameters in the system configuration section.

The login method is chosen by each user based on the situation or preference. Let's consider each method.

When loading the operating system

Method essence : after turning on the PC, click on the button responsible for launching additional boot options. Typically, this is the F8 key. It may change on some devices. This point can be checked on the manufacturer's website.

If, after pressing the button, the system continues to start with standard parameters, then you must restart the PC and repeat the procedure.

Before starting Windows 7, you need to remember the nuances that inexperienced users often forget about:

On laptops, the function keys F 1-12 are disabled by default, so to activate them you need to hold down on the keyboard Fn and click on the function key;
When starting the PC, the mouse is disabled, therefore, in the presence of several operating systems, the selection is made by the arrows on the keyboard;
To enable the arrows on the right side of the keyboard, press the Num Lock key.

After pressing F8, the user will be sent to the additional boot options section, where they need to select the "Start Safe Mode" item:

After clicking, the computer will boot with unusual desktop settings.

Launch from a running system

To run the OS in limited functionality through the user interface, you must:

The user decides which safe mode to start, based on the situation. For reference:

Minimal - the system loads the graphical (user) interface along with the services necessary for the computer to function. In this parameter, support for network components is disabled, that is, there will be no Internet;
Another shell - the OS starts without user interface... Command line only + required services;
Active Directory - loading important resources and desktop + Active Directory directories;
Network - network components are enabled;
No GUI - in this case, the welcome screen is not displayed;
Basic video - the system turns on with video drivers in VGA mode, which allows you to watch video on a PC or on the Internet;
OS Information - Shows all loaded drivers.

Possible malfunctions

Problem # 1 ... "Automatic Windows recovery 7 at startup. Troubleshooting". It's connected with system failure which the OS tries to fix automatically. After failure, the process is repeated.

There are three solutions:

Roll back the OS to the checkpoint;
Restore the system image using the installation disc;
In the presence of backup registry - restore it.

Problem # 2

limited functionality

Roll back the OS to a checkpoint;
Go to the control panel and remove recently installed utilities or hardware;
If the error has not been fixed, reinstall the operating system.

Video tutorial: how to enter Windows 7 Safe Mode

User question

Hello.

Tell me, I just can't enter Safe Mode on my HP laptop.

Installed Windows 10. I tried the F8 button - it does not work, I tried to create bootable USB drive- but the laptop does not start from it. Tell me, is there a working 100% way?

Michael.

Good day!

In general, with various issues with Windows - often it needs to be loaded into safe mode ... For example, your OS has stopped loading, a black screen appears in front of you, a critical error, a driver conflict, etc.

But it is far from always possible to enter it. (like the user who asked the question) - often the computer / laptop simply does not respond to your pressing the F8 button (earlier it was the basic button for invoking the boot selection menu).

This article will look at several ways that you can enter Safe Mode in different versions of Windows.

If Windows boots

Method number 1 - using msconfig

In order to change the type of download - open system configuration : to do this, press the combination of buttons Win + R, then in the line "Open" enter command msconfig and press Enter.

Next open the tab, and put a tick in front of the item "Safe mode" ... By the way, please note that there are several boot options: minimal, different shell, with network support, etc.

Save settings and reboot your PC, laptop. Windows should start in Safe Mode. To make Windows start booting again in normal mode, use the reverse procedure (uncheck the box in the

The method also works in Windows 8 and Windows 10. Just hold down the Shift key and restart the computer using the button in the START menu (in Windows 8 - on the desktop).

Next, the computer will start to reboot and a window should appear in front of you prompting you to choose one of the options for action: in our case, select "Troubleshooting" then in "Diagnostics" choose "Additional parameters"(see photo below).

Then you need to open the section .

And restart your computer.

Actually, after the reboot, several options for safe mode will be offered to your choice: with boot network drivers, with the support command line... Selection buttons: F4, F5, F6.

Method number 3 - using F8 (for Windows 8)

In general, according to the Windows 8 developers, you can enter safe mode using the same "old" key F8 (on PC / laptop parts - Sfift + F8 ). But the problem is that Windows 8 loads faster than older operating systems. Because of which, the user simply does not have time to press the key in time.

Especially if you have a modern PC with an SSD drive and UEFI instead of BIOS. On older PCs with HDD and classic BIOS - you can have time to press the F8 key, and this method is quite working!

If Windows won't boot

If, instead of the usual desktop, you see a black screen or the appearance of some critical errors, or the PC immediately freezes and becomes "dead", as soon as the desktop appears and you do not have time to activate another type of boot - then you need to have a bootable CD / DVD disk, or a USB flash drive.

If you do not have a flash drive, just below I give a link to the current article. If your flash drive was not recorded ahead of time, and you do not have a second working PC, you will have to ask your neighbor / friend for help ☻.

Great instructions for creating bootable USB drives for Windows installations XP, 7, 8, 10 (UEFI and Legacy) -

Next, you need to boot from this media. To do this, you need to enter and configure the BIOS accordingly, or call the BOOT menu (note: boot menu with media selection) ... These topics are extensive and I do not dwell on them in this article, below I will give links to my instructions.

How to enter BIOS (BIOS) on a computer / laptop -

Hotkeys for entering BIOS menu, Boot Menu recovering from hidden section -

How to configure BIOS to boot from USB stick or disk (CD / DVD / USB) -

Then follow the next path: Action selection / Diagnostics / Extra options/Command line .

Then you need to enter the command: bcdedit / set (default) safeboot minimal and press Enter. Then close the command line and press "Continue"... The computer should boot into Safe Mode - mission completed ...

Note! If you need to boot Windows in Safe Mode with Networking, use the command:
bcdedit / set (default) safeboot network

On Windows 7

Also valid for Windows XP

In Windows 7, to open the menu with boot options, it is enough after turning on the computer / laptop press several times in succession F8 key- until you see the Windows Advanced Boot Options screen (example below).

If the F8 key does not work for you, or you still cannot enter for "unknown" reasons, you can resort to one method. Wait for Windows to start loading and at this moment click on the restart button on system unit- RESET (on laptops, you need to hold down the power button for 5-10 seconds).

As a result, the PC will be restarted, and you will see the safe mode menu (it appears automatically). But in general, use such a method to enter without. mode - not recommended (to avoid additional problems ☻).

On laptop

In general, on the laptop, you enter Safe Mode in the same way as described above (use the method depending on your Windows OS).

Asus laptops: actual recommendations above (F8 or Shift + F8).

Acer Laptops: everything above is relevant. True, there are some models (old), where the method was rather unusual: Ctrl + F9.

Lenovo Laptops : As a rule, at boot, just press the F8 button (for Windows 7). If you have Windows 8, 10 - use the option with the command msconfig.

HP Notebook PCs (Entering No-Mode from outside Windows)

If the options above do not work, try the following:

Turn on your laptop;
Press Esc immediately until the startup menu appears;
Press the F11 key (System Restore starts);
Next, start Windows in Safe Mode (similar to method 2 at the beginning of this article).

Important!

Please note that on laptops, the F1-F12 function keys may be disabled in the BIOS (or they can be used while pressing the Fn (F-key) key) ... We are talking about the HotKey Mode (and others like it). That is why, sometimes on laptops, it is impossible to enter Safe Mode in Windows 7 by pressing the F8 key.

Configuring laptop BIOS in pictures -

For the additions - thanks in advance.

Best wishes!

Safe Mode, or Safe Mode, is a diagnostic mode for starting the operating system, or so-called crash protection mode, designed to diagnose and fix problems caused by software and return Windows to a healthy state. This operating system startup mode is used when it refuses to boot normally or from the last good configuration... This need arises after conflicts during installation or operation. software or drivers.

When the operating system starts up in safe mode, only the elements necessary for its launch and operation are loaded: system services, device drivers, applications, and the services themselves. All custom programs and drivers peripheral devices it does not load, which increases the chance of a successful Windows startup, especially if an external device driver or user utility has prevented it. In safe mode, you can fix virtually any problem with your computer due to third party program, drivers and even as a result of the activities of malicious software.

Start in Windows 7 Safe Mode

Safe mode in Windows 7 can be launched using several methods: by calling additional boot parameters of the operating system with the "F8" button during its boot and through the menu Windows startup.

How to enter safe mode through advanced options?

When the computer boots, after the initialization is complete and the basic input-output system is loaded, press the "F8" key. For reliability, you can press it several times per second until a black screen appears titled "Additional boot options".

If you didn't manage to do this and the operating system loading screen appeared, restart the computer using the keyboard shortcut "Ctrl + Alt + Delete" or the hardware key "Reset".

The list contains several options for booting the operating system in safe mode, select the required one and press "Enter".

Safe mode - starting the OS with a minimum set of services and drivers necessary for its functioning.

Safe mode with loading network drivers - the same, but with the connection of device drivers, services and other components that provide work with the global and / or local area network to which the computer is connected.

Safe Mode with command line support - instead of Windows explorer the user will have to work with the command console. The mode is intended for advanced users and system administrators.

If you are not absolute beginner among Windows users, choose the latest download mode. If necessary, you can always start the familiar explorer with a simplified interface by entering the "explorer" or "explorer.exe" command and confirming its launch with the "Enter" key.

Launching Safe Mode from the Startup Menu

Launch the "Run" window by pressing "Win + R" on the keyboard.
Enter the command "msconfig" in the window that appears and confirm its execution by pressing "Ok" or "Enter".

In the "System Configuration" window in its first tab, move the trigger switch to the "Diagnostic start" position and click "Apply".

We close the window by clicking "OK".
Reboot and Windows will boot into Safe Mode.

If we are talking about autoloading, all the data can be found by clicking on the link.

How to enter Windows 8 Safe Mode?

If booting in safe mode in Windows XP and Seven was not a problem, then in the new version of the operating system, users have problems with this.

Press "Win + R" and write "msconfig" in the window that appears, as in Windows 7.
We move to the second tab called "Download".
We put a check mark in front of the item "Safe Mode".
Move the trigger switch to the "Minimum" position.
If necessary, change the delay time before loading in the "Timeout" form and click "Apply".

6. Close the window and reboot.

Boot Windows 10 in Safe Mode

To start Windows 10 in diagnostic mode, follow these steps.

Click on the "Windows" button and select "Options".

We go to "Update and Security", where we select "Recovery.
In the section "Special boot options" click "Restart now".

Once in the "Boot Options" we select the mode we need using the F4-F6 keys on the keyboard.

In Windows 8 and 10th version, safe mode is also launched, as in Windows 7 - by calling the menu of additional boot options by pressing "F8" immediately after boot. About using other methods, you can from our next article.

If you still have questions on the topic "What is safe windows mode? ", You can ask them in the comments

if (function_exists ("the_ratings")) (the_ratings ();)?>

Safe mode in the operating room Windows system- undoubtedly, an important mode of computer operation. It is in it that you can delete various advertising banners and windows, work with the system when a virus is detected, or change it when the normal mode does not load. Perhaps you have already tried to enter this mode from your computer or laptop more than once, but all your attempts were in vain. This article will take a closer look at the process of entering Safe Mode, possible combinations on the keyboard and their sequence. Try trying them all if you are unsure which one to choose.

How to enter Windows Safe Mode from under the system

There are two ways to enter safe mode: from under the system and directly at boot time. The first method is much easier, since you do not need to watch the right moment and press the desired combination many times. You just need to select the system settings and save them. The next time you start, you will immediately enter Safe Mode. However, this method will not work if you cannot enter normal Windows boot mode at all. If there is no such problem, then feel free to proceed with the instructions:

At the same time, hold down the WIN + R or WIN + k keys on the keyboard in the Russian layout.

After a few moments, a new Run window will appear on the screen. You need to enter the "msconfig" command in it without quotes.
Click “Ok”.

In the “System Configuration” window that appears, go to the “Boot” tab.

This is where you can check the “Safe Mode” option. The computer will now boot into it.

Please note that several sub-items are available to you in safe mode. If you choose the minimum load, then you will not have access to network and command line parameters, not the primary drivers.
The item "Another shell" allows you to use the command line.
The “Network” item includes the Internet and local networks, so that you can use the Internet in a safe mode.

Click “Apply” and then “Ok” once you're done setting up. Now restart your computer and you will find yourself in Safe Mode. To get out of it, you will need to do the same manipulation, but already unchecking the "Safe Mode" box.

How to enter Windows Safe Mode during system boot

The second method involves using combinations right at the time your computer boots. This is useful when you cannot enter normal mode, or you are unable to implement the first method.

Its essence lies in pressing the F8 or F12 key immediately after the appearance of your computer's logo. Please note that the key responsible for entering the BIOS settings is always different. On most models this is F8, but it can also be F12, F7 and F11.

Sometimes, there are several tasks on one key and the only difference is when you press it. For example, often F8 first determines from which source the boot will be, and only then, after a second or two, it enters the BIOS settings.

You need to press the key as often as possible immediately after the logo appears, you can read your key at the bottom of the screen. Remember that it is very difficult to be in time.

Once you are able to enter the options, select the "Safe Mode" boot and press Enter. After completing all the necessary combinations inside safe mode, you can simply restart your computer - it will boot in the mode you are used to.

Safe Mode is a special Windows startup mode that is used to troubleshoot problems with the operating system. In safe mode, most drivers and programs are not loaded, startup is disabled, and only what is needed for Windows to run starts. This mode is useful for troubleshooting problems caused by installing or updating programs and drivers, which can lead to incorrect operation of the computer (freezes, lags), as well as normal startup of Windows.

Many of the users failing in running Windows they immediately begin to reinstall the system or look for a specialist who could do it. But the problem can be solved simply, and by yourself, you just need to restart your computer in safe mode and see the latest installed programs and the drivers that could fail, remove the latter.

It is very easy to determine the boot in Safe Mode - on the display of a laptop or PC in the corners of the screen, the inscription "Safe Mode" is displayed.

You can boot your computer in Safe Mode in several ways and in all Windows operating systems, we will tell you how to do this in versions 7, 8 / 8.1 and 10.

Loading Safe Mode from the Operating System

The easiest way to boot into Safe Mode is to use System Configuration while booted into Windows 7, Windows 8 / 8.1, or Windows 10.

To do this, press the START button and select the Run menu item or use the Win + R keyboard shortcuts. In the window that appears, enter the command: msconfig and press Enter

The System Configuration program opens. Select the tab and in the "Download Options" check the box Safe mode, click OK

Now confirm the reboot by clicking the corresponding button

Then your system will be rebooted into safe mode.

Do not forget, after fixing the problems, restart the program and uncheck the boot parameters. Otherwise, you will always be loaded into Safe Mode

In the operating system Windows 8 / 8.1 and Windows 10, there is another way to boot into Safe Mode. To use it, press the On / Off button. power on the login screen, or in Windows 8 / 8.1, hover the mouse over the right top corner desktop and select the Settings button, and then the power button icon, in Windows 10 - START and

The computer will restart and a service screen will appear, where you need to select the Diagnostics option

In the window that appears Extra options, choose Boot options

We are asked to reboot for further selection, click Restart

After the reboot, a window appears in front of us with a choice of boot parameters.
In Windows 8, select Safe mode and press Enter

In Windows 8.1 and Windows 10, to boot into Safe Mode, press the key with the number 4 or F4 on the keyboard

Your Windows 8 / 8.1 / 10 computer will boot into Safe Mode.

Loading Safe Mode with Keys

It happens that a laptop or PC cannot boot into normal mode at all, and to get into Windows safe mode, you need to just before starting the operating system, as soon as the image appears on the screen, hold down the F8 key, sometimes you need to use the Shift + F8 key combinations

From the Windows 7 start menu select

In Windows 8, 8.1 and 10, go through the procedure that.

Now you know how to boot your computer and laptop in Windows Safe Mode.