Many users of computers based on the operating room Windows systems know that this OS allows you to create restore points. They allow you to restore the full operation of the system in cases where it is infected with a virus, does not start, or the OS is malfunctioning... To help PC users who are not familiar with this procedure, we have prepared a material where we will describe this process in detail for Windows 7.
The principle of the recovery procedure in the seven
The basic principle of the procedure for creating a restore point is automatic saving system settings when it changes... For example, to point Windows recovery 7 began to be automatically created in the OS, there should be changes in the registry. That is, when installing any driver or software, the OS fixes this and creates a restore point. Based on the above, it becomes clear how many restore points Windows 7 can save on the hard drive. Therefore, in order for the PC user to return the computer to its previous state, it is enough just to use one of them and start the procedure itself.
How to restore a computer at seven
In this section, we will describe the OS recovery procedure. faulty P K using one of the points. For example, we will take a faulty PC with operating system Windows 7 Ultimate... It is still possible to boot the OS on this computer, but it is unstable, giving out "screens of death", freezes and many other system errors. Most likely, this behavior of the OS is caused by a virus or the absence of some system files.
Now let's try to select a restore point on this PC when it was still functioning stably. To do this, go to the system properties and open the "" tab. Now press the button Recovery….
After clicking, a wizard window should appear. In the wizard window, you can see that we can start fixing the OS using the recommended point, as well as selecting the points created earlier.
In our case, we will choose the last point when it worked stably and is recommended.
After selecting it, the wizard will ask you to confirm the recovery procedure using it.
As soon as you complete the confirmation, the wizard will immediately start rolling back to the previous OS state.
It can take five minutes or much longer to roll back to previous settings. The rollback time depends not only on the amount of returned data that is stored on the PC, but also on the processing power of the computer itself. After a successful rollback, you will see a message like this.
Manual Windows restore point
except automatic creation control points, the user has the opportunity to make them himself. For example, before installing a beta version of software that does not yet support the OS, you can create it manually.
To create a point manually, we will go to the system properties on the same "" tab. On this tab, we will select the bottom-most button named New…. After this action, a window will appear in which you need to specify a name. It is best to create a name associated with specific changes in the 7. For example, if you have installed a driver package, the restore point might be named “ Installing drivers from 10.06.2016».
After specifying the name, press the Create button. After successful creation, you will see this message.
You can find the newly created checkpoint in the wizard, which we looked at earlier.
In the wizard window, you can only select and view the properties of the point to roll back to the previous state of the system, but you cannot delete it using this wizard.
Deleting checkpoints can free up space on your hard drive, but you should also bear in mind that they are deleted permanently.
Removing a specific checkpoint will help us free utility CCleaner... You can download the CCleaner utility from its official website. To use the uninstallation options, you need to start the program and go to the tabs " Service / System Restore».
In the CCleaner utility window, you can view and delete all previously created restore points, except for the last one. This is done on purpose so that the user can use the last point in the OS in case of its crash.
Reviving an OS that has stopped loading
Consider an example of OS recovery when it completely stopped loading... In this case, the culprit, as in the example above, could be malware, unlicensed software and remote files operating system.
For this example, we need a licensed Windows disk 7. To get the OS back into operation, we will boot from this disk when the computer starts. In the second window of the bootloader there is a link "". To start rolling back to the previous state, we need to click on it.
After this action, the bootloader will scan HDD for the presence of previous operating systems and will allow you to select one of them for rollback. In our case, this is the only operating system Windows 7.
Having chosen the necessary operating system, let's move on to the next window.
In the second window of the wizard, a list of all checkpoints will open, with which you can roll back to the previous state.
Further actions are identical with the first example, so there is no point in describing them. The example described above is used by thousands of users, as it allows you to return the OS to normal.
Summing up
After reading this material, any PC user who was unfamiliar with checkpoints can restore the system to a working state. In addition, I would like to give our readers some advice.
For your OS to function properly, use good antivirus software and do not install pirated software.
For example, if you maintain the system in a normal state, then the creation of checkpoints can be completely disabled. Many experienced PC users do this because it can slightly improve the performance of the computer. However, if the resources of the computer allow, then the described technology will greatly simplify your life if something goes wrong with your OS. Therefore, the choice is yours.
Related Videos
Every day, the operating system undergoes a huge number of file structure changes. In the process of using a computer, files are created, deleted and moved by both the system and the user. However, these changes do not always take place for the benefit of the user, they are often the result of the work of malicious software, the purpose of which is to damage the integrity file system PC by deleting or encrypting important items.
But Microsoft has carefully thought out and perfectly implemented a means of resisting unwanted changes in the Windows operating system. A tool called Windows System Protection will remember the current state of the computer and, if necessary, roll back all changes to the last restore point without changing user data on all connected drives.
How to keep the current state of the Windows 7 operating system
The scheme of the tool is quite simple - it archives critical system elements into one large file called a "restore point". It has a fairly large weight (sometimes up to several gigabytes), which guarantees the most accurate return to the previous state.
To create a restore point, ordinary users do not need to resort to third-party software, they can handle it through the internal capabilities of the system. The only requirement that must be taken into account before proceeding with the execution of the instructions is that the user must be an administrator of the operating system or have sufficient rights to access system resources.
- Once you need to left-click on the Start button (by default, it is on the screen at the bottom left), after which a small window of the same name will open.
- At the very bottom in the search bar, you need to type the phrase "Create a restore point"(can be copied and pasted). One result will be displayed at the top of the Start menu, you need to click on it once.
- After clicking on an item in the search, the Start menu will close, and a small window with the title will be displayed instead "System properties"... By default, the tab we need will be activated "System protection".
- At the bottom of the window you need to find the inscription Create a restore point for disks with system protection enabled, next to it there will be a button "Create", click on it once.
- A dialog box will appear asking you to choose a name for the restore point so that you can easily find it in the list if necessary.
- After the name of the restore point is indicated, in the same window you need to click the button "Create"... After that, the backup of critical system data will begin, which, depending on the performance of the computer, can take from 1 to 10 minutes, sometimes more.
- The system will notify the end of the operation with a standard sound notification and a corresponding inscription in the working window.
In the list of points available on the computer, the newly created one will have a name specified by the user, in which it will also be indicated exact date and time. This will allow you to immediately specify it and roll back to the previous state if necessary.
When restoring from a backup, the operating system returns system files that were modified by an inexperienced user or malware and also returns the original state of the registry. It is recommended to create a restore point before installing critical operating system updates and before installing unfamiliar software. You can also create at least once a week backup for prevention. Remember - regularly creating a restore point will help prevent the loss of important data and destabilize the operating state of the operating system.
Today we will figure out how to create a windows 7 restore point for subsequent system recovery as a result of a failure. Unfortunately, there are situations after which your computer does not boot or boots incorrectly. The fastest and least problematic option to restore work is to use a rollback of the system to a stable version.
There are many ways to “break” the system, but the most common are software installation, driver installation, incorrect Windows update... These actions, in 90% of cases, lead, as well as to the failure of the operating system. But it's okay if you always have fresh system restore points.
In this article, we will figure out how to make restore points and how to use them to restore the system in case of a failure. If the recommendations below do not help you, you can always contact the professionals from hardmaster.info to recover your data.
Create a system restore point
To create a system restore point, open the computer properties
open the item “ System protection”
In the window that opens, press the button “ Create”
enter the name of the restore point, the date and time can be omitted in the name, they will be installed automatically. After entering the name, click “ Create”
The creation of the restore point will begin, wait for the process to complete
if everything went well you will see the message
after that, calmly perform experimental actions on your computer, in case of problems it will be possible to restore a working version of the system.
Restoring the system from a restore point
Now let's imagine that your system refused to work correctly. If your computer does not boot at all, you can use the disc to Windows installations 7. While loading the disc, select the item “ System Restore”And follow the path of choosing the operating system and the created restore point.
If Windows boots up but does not work correctly, you can use the standard system recovery tools. To do this, open the “System Properties” window and go to the “System Protection” tab (the windows are described above in the section on creating a system restore point).
In the window, press the button “ Recovery“, Then we press“ Further”
select the previously created system restore point (or the most recent one) and click “ Further”
In the window that appears, click “ Ready”
and once again agree with what we do
after which the system recovery will begin. During recovery, the computer will restart without your intervention. After a successful reboot, you will see the message
Ready! The system has been rebuilt and is back in working order. I would like to add that before each system update, restore points are created automatically. So if a system update has caused a breakdown, you can always use recovery.
How to create a restore point in Windows 7, 10 or 8 often arises after the bitter experience of data loss, but we will tell you how to make a restore point!
This happens automatically. Windows also does this when it detects major changes in its work - for example, when you install updates for the OS, driver, or some software.
These points represent the saved state of all files and registry settings - you can use them to run at any time. If at some point in front of you the need to undo some changes, you can quickly return the OS to the time period when these changes have not yet been made.
System Restore uses Windows function called "System Protection". This function regularly creates and saves information about computer system files, registry settings and previous versions files. Reverting the OS to an earlier state affects system Windows files, installed programs, registry settings, changes in scripts, batch files and other types executable files- but does not affect the user's personal files.
Create System Restore Point Wimdows
To create it manually, click right click mouse on the "Computer" icon on your desktop, in context menu select the item "Properties", and in the window "System" click on the link "System protection".
In the Properties window, click on New. The "Protection" window will open.
Enter any name (name) and click on the "Create" button.
The process you start will take less than a minute.
When the process completes, you will see a message that the process completed successfully.
Click Close. Now, at any time, you can return the computer to this or any other point in time.
Restoring Windows to a Previous State
If your computer is experiencing problems, you can return your PC to its "normal" period of state, and this is done in the following way. In the Properties window, click the "Restore" button.
Alternatively, you can open the recovery window using the Run dialog. Press Win keyboard+ R, enter the command rstrui.exe and press Enter.
The "Recovery" window will open. Click Next.
Choose the point to which you want to return your computer and select "Next".
Now you need to click on the "Finish" button, and then confirm the start of the process by clicking on the "Yes" button.
The process also includes restarting the computer. After restarting, you will see a message confirming that your computer was successfully restored.
More details in critical situations.
Have a great day!
Many users of the Windows 7 operating system prefer to configure the creation of restore points in order to immediately return the computer to its original state in case of something, while preserving important data. If the configuration provides for this, then several similar archives created at different times can be stored on the PC at once. Because of this, in some cases it becomes necessary to view these files for different purposes. Today we want not only to tell about the place of their storage, but also to demonstrate different ways viewing hotspots recovery in this OS.
Within the framework of the article, as many as three ways of viewing will be considered necessary information... You can use each of them to get specific information. However, it should be borne in mind that the principle of implementing the options is fundamentally different and will take a certain amount of time. Therefore, we advise you to study all the instructions presented, and only then choose which one will be most suitable for you.
Method 1: CCleaner
First, let's talk about the simplest and quick method... It consists in using the well-known to many third party program CCleaner. It contains many functions that allow you to optimize your PC, including viewing restore points for their further removal, if required. This solution will be optimal for those users who wish to uninstall outdated backups.
Of course, CCleaner will not allow you to see absolutely all the files included in the restore point, but we have already clarified that its main task is to clean unnecessary files because they often take up a huge amount of data on the medium. If you want to get more detailed information with regards to backup records, it is better to use the two methods below.
Method 2: OS Recovery Wizard
Rollback of the system to a certain point occurs through a special built-in tool of the operating system. It can only be run to view the available saves, without completing the procedure. This will help you find out exactly how many records exist, when they were created, by what means, and which programs will be reverted to their original state.
- Open the menu "Start" and through the left section go to "Control Panel".
- Click on the parameter here "Recovery" to start the related section.
- In the window that appears, you will see a button "Start System Restore"... You can safely click on it, since the recovery process itself will not start immediately.
- Read the description of the System Restore Wizard and navigate to next step by clicking on "Further".
- The existing saved records are visible in the table. The cells will display the date, short description and type of backup creation. If you want to view all existing points, including very old ones, check this box.
- You can select one of the entries and view the programs that it affects.
- When starting this function, you will have to wait a little while until the scan is complete.
- A separate window will appear where you will see the software and drivers that will be restored. However, the developers do not give a 100% guarantee that after that some of them will work correctly, which is written directly in the window.
As you can see, the above instructions provide a little more information related to restore points, but it is still incomplete because you cannot examine each file and work with it separately. If it is necessary to carry out precisely these actions, only the last, most complex method of today's material will help.
Method 3: Manage the system folder
Now we are talking only about those backups that are created by the operating system automatically on a schedule or during the installation of updates, as well as manually created saves through the Restore Wizard. Consider the set third party applications, allowing to carry out approximately the same actions, does not make sense, since in them the user himself chooses the location for storing the files, respectively, he can access them at any time. To be able to manage the found archives created by the OS, you will need to perform a number of complex actions. We've divided them into three steps to make it easier for you, and we'll start with the first.
Step 1: Unhiding Protected Folders
If you immediately start looking for the necessary directory, you will hardly be able to find it, since by default such protected files are hidden from the eyes of the ordinary user for security. Therefore, you cannot do without additional settings... The first stage is to unhide protected objects, which happens like this:
- Being in "Control panels", click LMB on the section "Folders settings".
- Move to the tab "View".
- Here, uncheck the box Hide protected system files.
- If a warning appears, read it, then click the option "Yes".
- When you're done making your changes, don't forget to click on Apply.
- If you are not configured to show hidden files and folders, in addition, before exiting this menu, mark the item with a marker "Show hidden files, folders and disks ".
If you encounter any errors while following these instructions, be sure to use Account administrator. Otherwise, you will need to log into the system under this profile, otherwise you will not be able to correctly complete this and the next step.
Step 2: Share your files
The second step will be the last preparatory step and it consists in providing access to the files. The required directory is protected not only from editing, but also from viewing, even for the administrator, so this should be fixed:
- Go to "My computer" and select the system there logical volume carrier. Now you will see the folder "System Volume Information"... However, it is now protected.
- If you try to click on it, you will see an access denied message. Let's solve this little difficulty.
- Click on the RMB directory and in the context menu that opens, select the item "Properties".
- Move to the tab "Security".
- Click on the button "Additionally".
- At the bottom there is a button to go to the menu we need to change permissions.
- Click on "Add" to set up a new folder access item.
- You can immediately enter the name of the user to whom we want to grant permissions in the field, but this is not always convenient. Better click on "Additionally".
- Search for accounts here. It will take literally a few seconds.
- In the list that appears, select your profile to open access to it.
- Then exit the menu in question.
- A window will open automatically "Permission Element"... Here, grant full access by ticking the appropriate box.
- In the end, don't forget to apply the changes so that the new configuration takes effect immediately.
In the same way, access to any protected directory is granted to another user belonging to this OS, home or corporate group. However, it must be borne in mind that after these actions the folders become vulnerable to viruses. Carry out such manipulations only at your own peril and risk.
Step 3: View restore point files
So we got to the main and most basic step - viewing the restore point files in the folder in question. After making the changes mentioned above, you can look into "System Volume Information"... Find the directory here « Windows Backup» : this is where archives and all other files associated with system backups are stored. You are now allowed to edit, delete and move this data.
In today's article, you learned about three different ways that allow you to view and manage system restore points. As we said, they are all fundamentally different from each other, so you need to choose a solution that meets your needs. The first will help clean up old archives, the second will allow you to find out more detailed information about the points, and the third is designed to get absolutely all information and edit files.