There are no cardinal changes, but the tools familiar with you are enhanced with you. To compare and evaluate updates made, it is worth finding out for what and how recommended by the developers to restore Windows 10. The Windows operating system is like to cling to viruses, which later prevents the work. Another reason for the urgent Ap-Bilda OS is determined by the voltage jump on the network, which in 50% of cases also causes failures.
Manufacturers offer us 4 ways windows restoration 10:
- Refund to the kickback point (to the control date);
- Rollback to the initial state (factory confiration);
- (CD);
- Record OS
Next, we consider in detail how each way to restore the system. We highlight the pros and cons of this novelty. We will get acquainted with the program, help restore the work of the computer and will not allow some failures that cause the OS collapse.
What is a refund to the checkpoint?
The checkpoint is the data stored on HDD. They include information on the assembly settings mounted on it software. An efficient moment to create a rollback point is the one when programs on the computer work without process violations. A computer, analyzing the work, periodically keeps the configuration and performance indicators.
If an unexpected error occurs, it is possible to restore Windows Windows without loss of all dataIn the rollback of the OS at a checkpoint in Windows 10, nothing significant was added. Setting the process as through the "Control Panel". Open ", you can 3 options. In the first version in the "Search" run, located on the "taskbar", dial the word panel, and then select the desired phrase. In the second embodiment, using the or press Win + X, select the "Control Panel" tab. In the third option, open the "Control Panel" by using the key + R keys.
In the Control Panel menu, select the "System and Security" tab, select the "System" tab, then click on the "System Protection" tab. Click on the "Protection" link.
Window will be released, click on the "Restore" button, select the desired point (more often it is specified by date) and click on the button NextIf the data you specified are correct, click on the "Finish" button. Take patience and wait for the end of recovery windows systems 10.
Note: "To apply a function of the control point, be sure to check whether the protection is enabled"
This is not difficult to do! In the "Protection" laying, select the protection parameters, the "Included" button is displayed for the priority drive. If the protection is not enabled, then click the "Configure" button. On a disk storing Windows files, turn on the protection by specifying the amount of memory used to store control points of rollback. Control points can be set independently. Set the name of the control point (manufacturers recommend putting current date) And trace the end of the procedure.
Factory setting (preparation for automatic recovery).
The effective way to reset Windows 10 is to restore the original state on the computer. To do this, you need to select the "Parameters" tab through the Start menu. Click on the "Foundation and Security" subsection, do not forget about the "Restore" button. The program will offer you different schemes.
The first diagram saves personal data, and the second completely cleans the disk.The main positive point in the rollback of the "source state" is that you do not have to use the Windows 10 installation media, automatic rollback will occurThe second scheme is considered extended. As in the first diagram, the meaningful information is saved, if you pre-copy to the external medium of information. In the main field "Return a computer to the original state", press the "Restore System" button.
"Do not lose license key from software, write it down in several places and store, only then the restoration of the computer even with an unfavorable scenario will be possible. "
If it happened, so that the files were seriously affected, the automatic recovery in the "original state" will be simply impossible. This is perhaps the only minus of such a way of restoring Windows 10.
Creating a recovery disk.
If you cannot restore the system by returning the computer to the original state, then this method will help you. Recovery disk is a manually created by a CD created, which can restore not only the entire axis, but also data from the hard drive. Such a name has come since the past versions of Windows WINTOVS, when literally for recording backups were used depending on the volume of CD or DVD information saved. In the recovery - drive.
In order to create a recovery disk in Windows 10, open the Control Panel, through the Start button or the Win + x key combination, go to the "Restore" item and click on the "Creating Recovery disk" buttonWhen creating a recovery disk, you can also do " Backup"What can also come in handy to reinstall Windows 10. It starts using the BIOS system recovery software or Boot Menu.. After running this disc on the computer screen, you can select the parameters to restore the Windows system 10. In essence, this recovery disk is the repetition of the installation flash drive, but it is much easier to work with it. It's easier to restore the system from the recovery disk.
How to make the image of the hard drive.
You can make a "cast" of your OS, working on both one and several disks. All installation drivers, programs, personal files that will appear by the time of creating the image will be seen.
Note: "As soon as on your computer, you correctly installed all the programs you need and files when Windows 10 is communicated to the optimal working state, and is not filled with excess trash, it is recommended to make a hard disk image."
To run the program to create an image operating system, Go to the "Control Panel" convenient for you. From the menu, select "System and Security", select from the "Archiving and Recovery" list, in the lower left corner click on "Creating an Image".
Also, creating a backup will help you to use it in a timely manner to promptly restore your computer. The hard disk image starts from the "Restore" menu new Installation WINDOVS 10, from the section " Extra options»In the" Diagnostics "menu.
Programs with the help you can restore Windows 10
- Recovery program - helps to restore violations in Windows WINTOVS. Recovery literally translates recovery. This is used by people who, due to their activities, have to restore data from hard disks, logically partitions of the hard disk, allows you to perform the recovery actions that are not possible in normal mode.
- Windows REPAIR - helps to correct a large number of known errors.
Acronis - in 15 minutes restore the system by sectors. The user-friendly interface and an affordable understanding is not even the most experienced user.
View video
When you turn on PC windows users 10 may encounter a blue death screen and a message that "computer is launched incorrectly" and it is recommended to restart it. This error indicates that system files are damaged, as well as in the registry editor, changes were made.
A similar error with the message "It seems, the Windows system loaded incorrectly" may occur when the PC is turned off during the installation of the antivirus, the removal of software. There are several methods to correct these errors.
See also: How to prevent problems with Windows 10 after updating?
Ways to solve the problem
If you encountered an error when the computer is launched incorrectly, it is necessary to double-check the parameters for automatically creating points recovery WINDOVS 10 and take advantage of one of the control dates. To do this, you load from the system recovery environment, select "Troubleshooting" or "Diagnostics" (if you are loaded in safe mode).
The system recovery wizard will be launched. Select the checkpoint before the blue screen of death and click "Next".
After restoring the system, Windows 10 will be loaded in the usual mode. If this method did not help solve the problem, go to the next method.
IMPORTANT! This method may aggravate the problem. Therefore, if you cannot solve the problem and are ready for fundamental methods, up to reinstalling the system, it is worth using the following recommendations.
In additional parameters, select "Command Line".
We introduce the following commands:
A list of sections will appear. It is necessary to remember the letter of the system partition and the reserved system.
Run the integrity check system files, Introduced the "SFC / SCANNOW / OFFBOOTDIR \u003d C: \\ / OFFWINDIR \u003d E:" Windows "command, where E is a disk with Windows 10, and the Windows 10 bootloader.
In the case when the system displays and notifies that resource protection cannot perform this operation, simply enter the following commands:
- E: - click "Enter" (e is a disk with Windows 10);
- mD ConfigBackup;
- cD Windows \\ System32 \\ Config \\;
- copy * E: \\ ConfigBackup \\;
- cD Windows \\ System32 \\ Config \\ RegBack \\;
- copy * E: \\ Windows \\ System32 \\ Config \\ - to a request for file replacement, press English "A" and click "ENTER". This operation we launch the registry recovery.
After executing the command, close all windows. You must restart the computer. Windows 10 should boot in the usual mode.
In the case when the problem disappears and the computer is loaded incorrectly, all the action executed on the command line can be canceled, entered the following tasks:
- cD E: \\ ConfigBackup \\
- copy * E: \\ Windows \\ System32 \\ Config \\
Also, the computer should be checked for viruses that can make changes to the registry. If malicious objects were not detected, the automatic recovery was not possible and the computer with Windows 10 continues to be incorrectly loaded, developers microsoft. Recommended to perform a clean installation of the BIOS system. In this case, the launch of Windows 10 will be performed correctly.
Softikbox.com.
Windows 10: recovery, parameters, instructions and recommendations. How to restore Windows 10 bootloader
The initial version of the tenth, all the "favorite and adorable" OS windows in the form of a preliminary free release of Technical Preview turned out to be at all what was expected from her. This only then came out modifications like Pro, Home, Education, Enterprise and Ultimate. But all of them, as well as the previous "Operations", have the property of "flying" at the most inopportune moment. Now the question will be considered associated with how the Windows 10 system is restored by the most elementary methods. This, it seems that no one will cause difficulties.
Windows 10: Recovery. What you should pay attention to?
Notice, the "dozen", whatever perfect it seemed to have an absolute identity with its predecessors. It is connected not so much with viruses or malicious codeshow many errors of the system itself.
First of all, you need to pay attention to the installed version. If it was the initial TECHNICAL PREVIEW OS, intended for familiarizing and installing over the existing "Operations", make a rollback not so difficult. By the way, it is worth separately saying that restore performance new system Subject to failure of the files, the old can be very simple.
We immediately note that there will be two system disk windows folders. The first (basic) is responsible for the preservation of the previous one. The second is the directory of installing a new OS. Unfortunately, not every user will be able to determine which it needs a Windows 10 recovery point, and even more so find a backup copy on the disk, not to mention the file itself responsible for this process.
Standard Windows 10 Recovery Procedure after installation
System rollback, as a rule, can be used in two cases: either the recovery of "dozens" after critical failures, or refund to the operating system, on top of which it was installed. Here you need to understand the difference.
In the first version, everything, in general, simply. Standard windows service Restore will be involved in any case. With installed, for example, the "dozen" on top of the "seven", it is the service of the new system that takes priority.
But with the return to the old OS and its settings the situation is somewhat more complicated. The fact is that the standard recovery point of Windows 10 in this case is not key item. The image of the previous system is playing a paramount role, which occupies sufficient space on Winchester.
Removing it even when using a standard tool for cleaning the system disk or partition when the checkmarks marked all unnecessary more components, you can only achieve the fact that the past "Operation" will not restore, by and large, it will not even be reinstalled without selecting another partition or formatting an existing . In addition, it is necessary to pay attention to the fact that the restoration of the Windows 10 system makes sense without rollback to the previous one. But also the "dozen", which is, so to speak, in priority rights blocks any other, previously installed OS. The exception is only the bootloader in which you can select the proper component for the start.
Preliminary actions to delete updates
Another important aspect is the installation of updates. In Windows 10, recovery can be connected, oddly enough, and with this. The fact is that updates, starting with the "seven", went out quite inoperable. Ultimately, the updates are not included incorrectly, they generally cause critical failures in the system itself.
To delete packets, you need to use a standard feature called from the "Control Panel". Here you need to take into account the installation date of each update. For sorting it is worth choosing a change or installation by date. Update packages, as a rule, have the designation KB. True, most of them relate, rather, to the installation of additional components of the Windows security system.
To cancel their installation, you just need to use the uninstall string of each update, after which the computer is fully rebooted. At best, Windows 10 recovery disk will help. But these actions are applicable in the event of the OS recovery, so to speak to the factory state. In addition, it will have to turn off each of them and watch it affects the system as a whole.
Automatic Windows 10 Recovery
Concerning automatic recoveryAnyone, now created by the OS reserves the place on the hard drive, creating its own partition other than the system used to save the parameters and the "Operations" settings installed at the moment.
On the other hand, if the system "flew", first should be restarted. In some cases (especially with the hang of "Windows"), the reboot has to be performed in the forced mode, say, on laptops it is done by pressing and holding the power button.
After that, a new system boot will occur and a message appears about the possibility of recovery. But this is true more for systems like XP, 7 and 8. In the "dozen" there is nothing like that. In Windows 10, recovery occurs somewhat differently. The system does not offer a choice, it restores the files by itself. But it works only under the condition not critical failures. When the download files are damaged, you will have to think.
Problems with loader
Now go to the largest problems of the system. Restoring Windows 10 download after failures is impossible without understanding the process itself relating to all systems of this series.
The boot sector is the most fast in the access plan of the Winchester region, in which there are information about the system files required to load the OS. This section has a peculiar table, providing for indexing the contents of a different file involved in the process of loading the OS. If malfunctions were found in it, the system will have to reinstall.
Restore operating system boot
The simplest method for which recovery is made windows bootloader 10, an option is considered applicable to all systems of this type. This type It may not work if the download is made from the hard disk or damaged partition. Usually, Windows 10 recovery disk is used to restore the operability of the OS. This allows you to avoid multiple problems and has a function of calling and controlling the so-called console.
This is a bootrec.exe / fixmbr command entered on the command line (notice, not through the "Run" menu, and through the CMD string, in the same place). Windows 10 boot recovery is made according to the same principles that were laid in version 7 and higher. Some commands may not work.
Sequentially, after the first line, the bootrec.exe / fixboot command is added (again, subject to booting from the disk). Further, if Windows 10's boot recovery is not possible, it will be necessary to check for all operating systems present on this device. It's just done. But for this, in the same console, you will need to apply the bootrec.exe / scanos command. Next, if nothing helped at all, Windows 10 bootload recovery can be continued except that the complete overwriting of sectors and restore the initial parameters. This is a bootrec.exe / rebuildbcd command.
Creating a boot disk
For many users most simple decision is a disc. The Windows 10 system restores is automatically implemented, but only when you enabled data read and boot from the corresponding device via the BIOS (the definition of the loading must be turned off hDD devices, and as the first device is established removable carrier CD / DVD).
Then the disk image itself is created. To do this, you can use utilities like Ultraiso or standard system (naturally, with the original Windows 10 distribution).
Saving copies of disk and sections
Often, it may be necessary to restore files. Windows 10, like any other "Operation" of this family, can create images of hard drives and logical partitions with custom data stored in them.
But for this it is better to use not standard means, And specialized utilities like Acronis True Image. Using such programs, the image, hard disk or logical section is created in a pair of clicks, and with the help of them you can also make the subsequent restoration of all the necessary information.
Restoration from the image
As for the process itself, Windows 10 recovery allows either automatic mode or on demand.
For the on-demand process, use the archiving and update section, which is in the standard "control panel". It needs to go to the advanced recovery methods, after which it is used to use a previously created copy of the system image with an indication of the location of the file.
What is better to use?
You can come even easier. In Windows 10, data recovery can be made using third-party utilities like the aforementioned Acronis True Image program.
Actually, the process itself is very similar to the standard, but is more optimized under an ordinary user who does not want to climb into the debris of system settings.
What about the restoration by chance remote filesHere it is useful to specialized according to the Recuva program or a very powerful R.Saver package, which allow you to find data on any media and restore them to the initial state, and with the preservation of the desired location and even metadata. But this is already as they say, a separate topic.
What do we end up?
In general, as can be seen from the above material, the recovery of "dozens", as well as the older versions of the Windows OS, is not difficult. The main thing is to be patient because some processes can be quite long in time. On the other hand, if you recovery, it is still better than reinstalling Windows 10, especially since, when you re-install, user files, folders and programs may be lost.
As for the method of recovery or preferred program, which will be used, each user must already decide here. It is clear that you can create not only restorative discs. With the same success, you can use the bootable flash drive. True, it will have to pay special attention to bIOS settingsTo install a USB device as a source for download. And this is done with the flash drive already inserted into the port even before the computer or laptop is turned on, otherwise the BIOS simply does not determine. So be careful.
fB.ru.
Error "Computer run incorrectly" in Windows 10
Sometimes it can happen so that when you start the tenth windows version A notification appears on the Automatic Recovery screen that the computer is running incorrectly or the operating is incorrectly loaded. To eliminate this problem, you need to know its reason, which will make it possible to choose the solution.
Initially, it is worth noting that if the error pops up after disconnecting the PC or stop the upgrade "Dozens", but it is eliminated by a simple reboot of the computer, and then again occurs, or when the PC does not immediately turn off, after which the restoration is automatic mode, then this instruction is performed Not useful. In this case, this may affect several reasons.
The most common cause with such a computer behavior is nutritional problems, perhaps even the power supply of the jar. In this case, after several attempts of the start of the Ourser, Operations are activated automatically. The second most popular option is malfunction with PC disconnection and quick download mode. It is worth deactivating a quick start.
Also, such can cause problems with drivers. For example, on laptops with intel processors The Intel Management Engine Interface driver rollback to the previous version may well eliminate this problem with disconnection. In addition, you can run scanning and restoring the integrity of the Data "Tens".
If the problem occurs after resetting the system or update the most common option for the appearance of a notification that PCs loaded incorrectly looks like this. After resetting the operating system, it will highlight blue screen With Inaccessible_Boot_Device notification, however, this may indicate the problems of trying. AT this case Everything is much easier. After that, data is discharged, as a result of which the "Restore" window appears with the "Advanced Settings" key and a reboot is performed. This method can be applied in other options for the manifestation of a similar error. This is a completely safe way.
In this window, you must go to "Advanced Parameters", where you need to click "Search and Correct Problem". On this screen, you need to click on "Additional Parameters", in which the "Download options" are located. You need to click on them, and then click "Reboot".
In the "download parameters" you want to press F6 to run safe mode With the ability to work with a string of commands. If it succeeds, then you need to enter the administrator.
In the command row that appears, you must perform multiple records in a specific sequence. When entering the first can pop up an error notification or they will be executed for a long time. In the event you just need to wait.
Initially, you must enter SFC / SCANNOW. You should then write Dism / Online / CleanUp-Image / RestoreHealth. The last command Shutdown -r will restart the computer. You must wait until the computer boots. Basically such actions are able to correct the error and return the normal start of the OS.
"The computer is launched incorrectly" or "It seems that the system has been loaded incorrectly" If a notification is notified after starting a PC or a laptop, and the computer is checked, and there is a blue screen with a notification that the PC is incorrectly launched and offered to restart it or visit additional settings. This may indicate defects in some system operating system files.
Such a problem may occur after the power is turned off when updating, installing antivirus or removal from PC viruses, registry cleansing, as well as installation of unknown programs.
It is still possible to solve this problem. If this situation occurred, in which the system is activated automatic creation Recovery labels, then you need to try to apply this opportunity. Make it can be quite simple.
You need to click "Advanced Settings", and in the Select and Troubleshooting window that appears. Then again, you must click "Additional parameters", where the "system restoration" should be found.
In the window that appears, click "Next" and, if a suitable rollback mark is detected, it must be applied. Most likely, these actions can be getting rid of the error. If there are no labels, then you need to click "Cancel". After troubleshooting the problem with another way, it is necessary to activate the automatic creation of rollback marks.
By clicking on the "Cancel" key, a blue screen will appear. It needs to click on "Troubleshooting".
After that, it is possible to take subsequent steps that can lead to the return of the launch. In this case, the row of commands will be applied. You must click on the "Return PC to the original state" button, which will reset the system, but the ability to save personal data will remain, and all programs will be deleted. If there is a desire to return to its original state, then you need to click "Additional parameters", and then select the "Command Line".
It is worth paying attention to that using this method you can seriously harm the computer, so it is necessary to take it only with full confidence in your actions.
Using the command strings, the integrity of the files and system elements will be sequentially checking the system, and restore the registry from the backup. Basically, these actions help eliminate the problem.
The first thing is introduced by diskpart. Then you need to write List Volume. After that, a list of disk volumes should appear. Here it is necessary to find out and remember the letter of the system partition with the operating system. In addition, it is necessary to remember the letter of the "reserved system". After that you need to enter EXIT.
Next, you should write SFC / SCANNOW / OFFBOOTDIR \u003d C: \\ / OFFWINDIR \u003d E: \\ Windows to scan the integrity of the data. Here from: is a storage device with a loader, and E: - disk with an operating system. In this case, the notification may pop up that this procedure cannot be executed. Here you need to continue execution of commands. Then you should write E:. After that, you need to write MD ConfigBackup, then CD Windows \\ System32 \\ Config \\. Next you need to execute Copy * E: \\ ConfigBackup \\.
The following command will be CD Windows \\ System32 \\ CONFIG \\ REGBACK \\. Then you need to enter the Copy * E: \\ Windows \\ System32 \\ Config \\, after which the file replacing request will pop up. Here you need to press A in Latin layout and then ENTER. These actions will launch the registry recovery from the backup, which is automatically created by the OS.
After that, you need to exit the command string and in the "Select Action" window you need to click "Continue. Exit I. application of Windows ten".
After that, the system must start. If this did not happen, then with the help of the command string, you can cancel all adjustments. To do this, it is necessary to sequentially enter the CD E: \\ ConfigBackup \\, and then Copy * E: \\ Windows \\ System32 \\ Config \\, then press A and ENTER. If nothing of this helped, then it remains only to reset windows settings 10 to factory.
computeroLogia.ru.
The computer is incorrectly launched: what to do?
For all Windows OS, including the most stable seventh or new tenth version, characterized by the appearance of failures when the system in normal mode is not loaded and reports to the user that the computer is launched incorrectly. What is the reason and how to deal with it, look next.
The computer is launched incorrectly (Windows 8.1, 8, 10): The main causes of failures
As for the reasons for such behavior of the system, there may be quite a lot of them. According to statistics, most often similar failures arise due to incorrect completion of the computer, forced stopping some processes (for example, updates), damage to system files or even the loader itself.
The most common are failed error descriptions like Inaccessible_Boot_Device (inaccessible booting device), Critical_process_died (interrupted critical process) or something else in this way.
Very often notifications that the computer incorrectly started and because of this, Windows cannot start in normal mode, can be found when the voltage drops when spontaneously disabling the terminal from the network occurs when the block is missing uninterrupted power or stabilizer, when overheating the power supply, etc. Separately, it is worth paying attention to the functionality of all "iron" components. But it is the little things. Much worse there are situations when there are viruses that violate viruses windows work, Or for some reason, the components responsible for loading the system fails. Consider several common cases of such problems and the basic methods of their elimination, without touching problems with the "hardware".
What to do in the first place?
So, if a situation suddenly happens when the computer is incorrect and the system cannot start, it can very well be that this is a fleet failure. In this case, to start, you should restart the system or simply turn off the terminal ordinary software From the "Start" menu.
If this is not possible, you will have to use forced shutdown by long pressing the power button on system block Or on the laptop panel.
As a rule, after such a procedure, during startup, the system initiates the system disk check for errors, after which it can boot in normal mode. Visually scan can be monitored in Windows 7 and below. In later versions, it is made in the background.
Check for viruses
No less important in the event of a message that the computer is launched incorrectly, is the diagnosis of the system for the presence of viral threats. If the system does not start at all, it is quite problematic.
Therefore, it is recommended to use special utilities like Kaspersky Rescue Disk.from which the download is made before windows startup. In the utility itself to facilitate the task, you can use its own graphic interface, and it works significantly better than stationary scanners, allowing you to determine many threats even in random access memory or boot sectors.
Automatic recovery. The computer is launched incorrectly (Windows 10 and below)
In general, almost for all the latest Windows systems, the presence of a special self-healing module after critical failures is characterized. This is the so-called automatic recovery. The computer is launched incorrectly, the system does not load, although there are signs of working capacity. In this situation, the recovery of the system should be launched automatically.
The screen appears a corresponding notification of the start of the analysis to restore the system. But it works only if Windows has a fixed rollback point. If the user before the emergence of the failure has cleaned or deleted previously created recovery points, nothing will work. The reserve simply does not have a copy from which you can make a rollback to the previous state.
In the seventh version of the operating system and below the correction of such a situation looks much easier. When starting the system at the download stage, use the F8 key, which is used to select a secure boot mode, but in the menu that appears, you need to select the load of the last workable configuration (again, if possible). By the way, in the tenth version, use the F8 key to call such a menu is also possible.
Loading in safe mode with system file integrity check
The situation is somewhat more complicated system components Systems with the inability to restore them in automatic mode (when starting or rebooting after the notification appears that the computer is launched incorrectly). What to do in this case?
To begin with, you can try to boot in safe mode, after which it is used command linecaused from the "Run" Console (Win + R). If for any reason this option is not possible, you should specify a safe confirmation mode on the command line to determine the component on which the download stops. In this situation, the command line will have to call from the recovery console from the installation disk.
And in that, and in another case, SFC / SCANNOW is prescribed on the command line, after which the system will automatically check and restore failed components. But it does not always help.
Disable driver signature verification
Now let's look at the situation when the computer is launched incorrectly (Windows 10 on board). In the tenth version, it is quite problematic to get to the secure regime. Here you will need an installation or reconnaissance disk, when booting from which you need to select additional settings in the recovery section and go to the diagnostics, and then use the download parameter menu.
In the menu that appears, there is a trigger string. digital signature Drivers, standing under the seventh number. You need to move to it and press the input key (faster it can be done by pressing the number 7 keypad).
This problem is very often connected with the OEM-DRC64.sys driver. If you turn off the signature check, you need to enter the registry editor in the system (regedit in the Run menu) and go down the HKLM branch through the System section to the CurrentControlSet directory, in which there is a Services directory. Here you should find the driver folder and delete it.
Restoring system from the image
It is believed that the best option for restoring the system's performance after a message is issued that the computer is launched incorrectly (Windows 10 is used or any other version) is the recovery from the previously recorded image image.
Not everything, however, about such things think in advance, nevertheless, the process of bringing Windows to order in this case is the fastest and simple.
Using the command line with incomplete or interrupted update
There are also situations when problems with the fact that the computer is launched incorrectly (8.1, 8, 7 or 10th modifications on board) are associated with an unfinished or interrupted update of the system. You can also fight these failures.
We call the command line when loaded, as shown earlier, and we register there the command shown below:
Forced recovery teams
If this option does not help, the computer is incorrectly launched and the system is not loaded, you can try to make forced recovery.
To do this, first in the command line we prescribe three commands:
- diskpart;
- list Volume;
- exit.
Be sure to remember the litter of the system partition, since in most cases it will differ from the generally accepted value "C" (most often will appear system section "E").
After entering each command, the input key is pressed. In theory, this method gives almost a 100 percent guarantee of Windows performance restoration.
Looping loader
Finally, if the computer is launched incorrectly, Windows all versions offers another universal solution that allows you to restore the loader that may be damaged.
To do this, in the same command console, you must first use the CHKDSK C: / F / R check command, and then directive the recovery directive, as shown below:
After that, you can reboot. The system, if the failure was associated with the loader, will earn like a clock.
If nothing helps
Finally, another situation, when nothing of the above does not help. Have to do reinstalling Windows. But in order not to "demolish" the system entirely, when loading from the installation disk, in the diagnostic section, you need to select a computer return point in the so-called source state.
This approach provides for the option of saving user files, after which it will be possible to produce "clean" installing WindowsThat in most cases allows you to get rid of software failures much better than all checks combined. But this, as it is already clear, follows only in the most extreme case, when all other funds were powerless.
Instead of the result
Finally, it remains to add that the situation when the computer is incorrectly launched or the system does not start, it can be connected with the "hardware". In particular, problems with a graphic chip or a special impact on the loading of the system can be provided hard diskWhen he starts to "draw". If it is really a physical problem, you can not do anything. But for loyalty to determine faults, additional diagnostic tools should be used. Only in the case of the correct identification of the cause of the failure and failure of the component, it is possible to determine the correct decision to eliminate such consequences.
As for all other cases, it is believed that at least one of the above methods will work. So it remains to be advised to use troubleshooting options, moving from easy to more complex methods. But in any case, so that such excesses do not occur in the future, it is better to take care of the creation of an image of a system or a recovery disk, recording anti-virus utilities, etc. It is quite simple to make it, even with your own Windows. Such tools should be at hand at any user, as they say, for the most unforeseen case, because none of the now used Windows-systems from failures is insured.
Bios. - A set of utilities that installed in the motherboard, which make it possible to enable the device for installing the OS. With it, Windows 10 is booting, the selection of the data carrier occurs, the range of thermal sensors is indicated, various parameters are configured. If the system has stopped being downloaded, errors fly out and perform recovery standard method You can not, you can via BIOS.
How to restore Windows 10 through BIOS.
But this method can only be used if there is an installation disk or flash drive with a distribution room of a licensed operating system with the version and the discharge that you have installed without external drive This option is not possible.
First of all, you need to start with the BIOS settings for reading the disk immediately when you start the computer.
If the preparation of automatic recovery does not give the ability to restart the computer normally, it is necessary to do this forced, clamping the shutdown buttons for 10-15 seconds, immediately as the system started uploading, you must press one of the keys: F1, F4, F3, DELETE, F8 (exactly what to say. it is necessary to click it impossible, because it depends on the model motherboard on your device).
In the instructions for a computer or on the manufacturer's website, you can search which key will be needed to enter. Most PCs use the "Delete" button, the "Ctrl + Alt + ESC" key combination can be used on laptops.
After the BIOS starts go to the Boot section.
It is necessary to find the 1st boot device parameter, which may be located in the section " Boot Device. Configuration, "Advanced Features", "Boot", "Boot Sequence. There will be required to set the parameter for the CDROM or PXE Und i disk to download from the flash drive: 
Press "F10" to save the result, insert a disk into the drive or connect a flash drive on which the distribution is stored, then restart the device.
After the computer will appear, the initial menu of the installation menu will appear, where it will be necessary to click on the "System Restore" button.
The "Select Action" menu opens, you need to select "Diagnostics". 
Then go to the "Advanced Parameters" item.
Next click on the "Restoration System" item. 
After clicking, the window will start with the selection of the recovery point. 
The "Recovery Recovery" function starts scanning a computer for errors and during their detection corrects. You can try to run the utility, but in most cases after the search usually gives a message that the computer failed to restore.
If your rollback has been provided and your Windows after the specified actions has been successfully restored, the field will need to go to the BIOS and return the priority of download hard disk First place.
- How to restore Windows 10 through the command line.
If you did not create the control point, restore wINDOVS systems 10 You can try to execute through the command line. To do this, you will also need a boot disk or flash drive with the Windows operating system, which is installed on the computer.
In the "Advanced Settings" section, select the "Command Line" item. 
In the window that opens, printed "FixBoot". 
Then the action must be confirmed by pressing the "Y" key.
After restoring the Windows 10 bootloader, the system must be checked for damaged system files.
Options for solving problems with damaged system files
- The boot sector of the operating system is damaged.
In the command prompt, you need to enter "FixBoot", click "Enter", then enter "FixMBr", press "ENTER". After that loading windows Sector will be restored. The computer can be restarted as usual. - Disappeared boot file. boot.ini.
In the line it is necessary to print "BootCFG / Rebuild", then click "ENTER". All possible system questions confirm by pressing the "Y" and "Enter" key. - CONFIG is damaged in the System32 folder.
In the drive, you must insert a disk with your version of the OS, enter on the "CD REPAIR COPY SYSTEM C: \\ Windows \\ System32 \\ Config command prompt", then press "ENTER". - There are no "NTLDR" or "NtDetect.com" files, the system gives the message: "NTLDR IS Missing when booting Windows".
- Enter the "Copy x: \\ i386 \\ NTLDR C: \\" command line, press "ENTER" (where X is the letter of your drive, and C is the letter of your system disk on which your OS is installed).
Restoring the system via the command line when the computer is enabled.
When reluctance, restart the computer, you can restore the system through the command line from Windows. To do this, you will need to insert the disk in the DVD-ROM when the PC is loaded. After that, run the command line by pressing the combination of hot keys "Win + R" and in a row of searching the "Run" window "SFC / SCANNOW" and click "OK". After which the battered system distributions will be copied with boot disk automatically. Restoration of the system, rollback passes rather quickly and the demon problem.
The article is dedicated to messages that appear on the Automatic Recovery screen and inform the user that the operating system started incorrectly or the computer is launched incorrectly Windows 10. In the article we will deal with the reasons for their appearance and consider how to get rid of such messages and prevent them.
What should be done first
When alert appears that the PC is incorrectly loaded, you must restart the computer. In cases where the message pops up when rebooting the system due to interruption windows updates, It helps.
The second thing that can be the source of the problem is the abnormal mode of functioning of the power supply, as a result of which the hardware components operate in the mode differing from typical. Due to the two unsuccessful attempts to download Windows 10, the latter calls the system recovery function, thereby providing the user to solve the problem.
Perhaps the cause of the problem are drivers. Remember or look, the drivers of which components were installed last and perform their rollback.
The appearance of the message after resetting or updating Windows
A common algorithm, the execution of which leads to the appearance of an error is the following: Turning on the PC after the update / reset Windows It is accompanied by a blue screen, and after collecting information, a window is launched with options for restoring the operating system.
- In this case, go to "Additional Parameters".
- Call "troubleshooting".
- We again go to "Additional Parameters".
- Click "Start Parameters".
- We click "Reload".
After restarting the computer, "boot parameters" will open, where, using the F6 key, run a secure mode with command line support.
Perform command sequence:
- sFC / SCANNOW - checking system files with recovery damaged;
- dISM / ONLINE / CLEANUP-IMAGE / RESTOREHEALTH;
The appearance of an error "Computer is launched incorrectly"
It happens that, due to the inclusion of the computer, an alert appears that reports on the implementation of the computer / laptop diagnostics. The latter ends with a blue screen with the text "Computer run incorrectly" and open the "Advanced Settings" recommendation after rebooting.
Specifies this situation on the damage of system files is often the registry.
The culprit of the situation is:
- power supply interruptions;
- work viruses or antivirus program;
- windows 10 updates;
- deleting or incorrect values \u200b\u200bof critical to operation of a key.
To solve the problem, we do the following.
1. Go to "Advanced Parameters".
2. Click on the "Troubleshooting" item.
3. Click on the button with the inscription "System Restore".
4. With the active function of creating rollback points, we choose one of the last snapshots of the system and click "Next", then "ready."
Often, the resumption of Windows 10 solves such a problem.
5. If the option is disabled (it should be enabled after returning the system to the operating status), a window appears where you want to select "Troubleshooting".
6. Click "Return PC to the original state", in order to reset Windows 10.
7. Be sure to select an option with maintaining personal files (all the files located on the C \\ disk: files will remain on our own places after Windows reset, but installed programs This does not concern).
Further actions can edit the situation and exacerbate it. Their execution may lead to unexpected consequences. Following the steps below subjected the system at risk, remember this.
Using the command line, as in the past method, check the integrity of the system files, correct damaged, and also restore the registry files from the backup.
8. We execute the "diskpart" command in order to call a tool for working with sections.
9. Enter "List Volume" - a consequence of the execution of the command will be visualizing the list of volumes of all connected to the PC discs.
10. Find the list system Disk and reserved by the system and remember their letter tags.
11. Close the program by performing "Exit".
12. Enter "SFC / SCANNOW / OFFBOOTDIR \u003d F: \\ / OFFWINDIR \u003d C: \\ Windows" and click "Enter".
Here: F - reserved by the system volume or drive (with a loader), C is a system partition.
13. "C:" - go to the system disk where Windows is located
14. MD ConfigBackup - Create a CONFIGBACKUP directory.
15. "CD Windows \\ System32 \\ Config \\" - go to the appropriate folder.
16. "Copy * C: \\ ConfigBackup \\" - copy a directory previously created to it.
17. "CD Windows \\ System32 \\ CONFIG \\ REGBACK \\" - go to system folder "REGBACK".
18. "Copy * C: \\ Windows \\ System32 \\ Config \\" - copy the contents of the specified directory to active.
19. Click "A" with the Latin keyboard layout and "Enter" to confirm the overwriting of the files.
These actions will restore the registry files from the automatically created backup.
20. Close the command prompt window and click on the button with the text "Continue. Exit and use Windows 10. "
With a large share of the probability of Windows 10, after performing this simple algorithm it will start.
Cases completely "kill" Windows 10 by manipulations with the registry files are extremely rare, but still happen. If this happened or the actions did not bring the desired result, one of two solutions remains:
- Reset Windows 10;
- Reinstall the operating system.
The first is done through the "Search / Troubleshooting" item in additional parameters. Even in critical situations, you can get there by using the bootable carrier with distribution of Windows 10.
In the second case, you will need boot flash drive And about 30 minutes of partially free time.
Windows 10, like previous versions this operating system is not fully protected from failures, impact computer viruses, failure of equipment and other problems. Therefore, if you have any problems when working or loading OS, you can use the built-in tools to return the operating system to a working condition.
Windows 10 restore can be carried out in several ways.
If the computer is loaded:
- Using the recovery point.
- File history.
If the computer does not load:
- Using recovery disk.
- Using the installation disk.
Now we will analyze these recovery options in more detail.
Method 1 - using the system recovery point
Windows periodically saves information about programs, system settings, drivers, registry and drivers at system recovery points. This happens before the meaningless changes in OS, such as installation of programs, drivers or system updates. Also, the recovery point can be created manually. How can you read it in.
It is worth noting that after recovery, your data will remain intact, and drivers, programs and updates installed after creating the recovery point will be deleted.
1. Run the system properties window (keyboard shortcut Windows + Pause.) And open the item "".
2. Click the " Reestablish", And then" Next ". In the list of available recovery points, select the desired item and click "Next".
3. Check the selected parameters once again, click the " Ready"And then" yes "in the warning window. The recovery process begins, while the computer will be rebooted.
Method 2 - Reset to factory settings
In Windows 10, it is possible to return the system settings to the original state. At the same time you can do full reset or with saving user files. The advantage of this method is that if you want to reinstall the system, you do not need to install Windows C zero, just perform a reset.
To take this feature, you need to go to the next section: " Computer Settings -\u003e Update and Security -\u003e Restore -\u003e Return the computer to the original state."And click the" Start "button.
More detailed process of reset to the factory settings, we reviewed in this article:
Method 3 - File Story
This method is not directly related to the restoration of the system, but in conjunction with the rest of the way it can also be useful.
"File Story" allows you to do backups Your files are automatically and manual. It is enough for you to activate this feature and specify which folders need to be saved. The system will automatically make backup copies of your documents with the frequency you can configure. If necessary, you can easily restore the files you want.
How to enable, configure and use this tool you can read in this article:
Method 4 - Using Recovery Disk
If Windows 10 is not loaded, you can try to resuscate the system using a recovery disk that will allow you to access additional startup parameters.
If you still do not have a recovery disk, use this instruction:
After downloading from a USB recovery disk, go to the " Diagnostics -\u003e Advanced Parameters».
Here you can use several computer resuscitation options:
- Windows recovery using the recovery point. This option we have already considered higher. Its meaning is the same, only the launch is made by another way.
- Restoring the image image. This method is known since Windows 7. If you previously created the image of the system in Windows, you can easily restore it through the recovery disk. How the system image is created in Windows 10 can be found here:
- Using the next item you can try to automatically correct the errors when loading.
- For more advanced users, it is possible to run the command prompt to restore the system or other purposes.
- Well, the last option is the return of Windows to the previous assembly.
It should also be noted that if you record system files to disk when creating a system recovery disk, you will have the ability to reinstall Windows from this disk. But if you bought a computer with a pre-installed Window 8 (8.1) with hidden section Recovery, the system version will be restored, which was originally supplied with the computer.
Method 5 - using the installation disk
If Windows does not boot, and you do not have a recovery disk, you can use the installation disk to resuscitate the computer.
Installation disk You can record on a USB carrier or DVD using a medium to create a medium that can be downloaded.
Uploaded to S. installation mediaYou will see a window in which you want to select language parameters and click the "Next" button.
- Return the computer to its original state. It will be reset to factory settings with the saving user files or without. We have already considered this tool higher (method 2).
- Extra options. As in the system restore disk, a list of tools will open, with which you can return the Windows performance using the recovery points, the image image, etc.
We reviewed the basic ways to restore Windows 10. Usually it is enough to return the system into a working condition. You could still add a clean Windows setup here, but this is an extreme measure and to restore the system has an indirect attitude.